98 research outputs found
Recommended from our members
Lowâcost flexible thinâfilm detector for medical dosimetry applications
The purpose of this study is to characterize dosimetric properties of thin film photovoltaic sensors as a platform for development of prototype dose verification equipment in radiotherapy. Towards this goal, flexible thinâfilm sensors of dose with embedded data acquisition electronics and wireless data transmission are prototyped and tested in kV and MV photon beams. Fundamental dosimetric properties are determined in view of a specific application to dose verification in multiple planes or curved surfaces inside a phantom. Uniqueness of the new thinâfilm sensors consists in their mechanical properties, lowâpower operation, and lowâcost. They are thinner and more flexible than dosimetric films. In principle, each thinâfilm sensor can be fabricated in any size (mm2 â cm2 areas) and shape. Individual sensors can be put together in an array of sensors spreading over large areas and yet being light. Photovoltaic mode of charge collection (of electrons and holes) does not require external electric field applied to the sensor, and this implies simplicity of data acquisition electronics and low power operation. The prototype device use for testing consists of several thin film dose sensors, each of about 1.5 cmĂ5 cm area, connected to simple readout electronics. Sensitivity of the sensors is determined per unit area and compared to EPID sensitivity, as well as other standard photodiodes. Each sensor independently measures dose and is based on commercially available flexible thinâfilm aSi photodiodes. Readout electronics consists of an ultra lowâpower microcontroller, radio frequency transmitter, and a lowânoise amplification circuit implemented on a flexible printed circuit board. Detector output is digitized and transmitted wirelessly to an external host computer where it is integrated and processed. A megavoltage medical linear accelerator (Varian Tx) equipped with kilovoltage online imaging system and a Cobalt source are use to irradiate different thinâfilm detector sensors in a Solid Water phantom under various irradiation conditions. Different factors are considered in characterization of the device attributes: energies (80 kVp, 130 kVp, 6 MV, 15 MV), dose rates (different ms Ă mA, 100â600 MU/min), total doses (0.1 cGyâ500 cGy), depths (0.5 cmâ20 cm), irradiation angles with respect to the detector surface (0°â180°), and IMRT tests (closed MLC, sweeping gap). The detector response to MV radiation is both linear with total dose (~1â400 cGy) and independent of dose rate (100â600 Mu/min). The sensitivity per unit area of thinâfilm sensors is lower than for aSi flatâpanel detectors, but sufficient to acquire stable and accurate signals during irradiations. The proposed thinâfilm photodiode system has properties which make it promising for clinical dosimetry. Due to the mechanical flexibility of each sensor and readout electronics, lowâcost, and wireless data acquisition, it could be considered for quality assurance (e.g., IMRT, mechanical linac QA), as well as realâtime dose monitoring in challenging setup configurations, including large area and 3D detection (multiple planes or curved surfaces). PACS number: 87.56.F
Recommended from our members
Maximum MLC opening effect in dynamic delivery of IMRT: leafâpositional analysis
The analysis of dynamic multileaf collimator (MLC) positions for the delivered intensityâmodulated radiotherapy (IMRT) plans is crucial in that it may capture dose delivery problems otherwise difficult to observe and quantify in the conventional dosimetric measurements with film or with an ionization chamber. In some IMRT systems, delivery of IMRT fields starts with a maximum MLC opening (roughly the shape of the target in the beam'sâeye view) and then proceeds to the subsequent dynamic MLC subfields. No irradiation is required in going from the initial segment (maximum opening) to the next one, and theoretically, no dose should be delivered in that initial moment. However, due to a finite sampling time of the MLC controller, the finite speed of the MLC, and a finite leaf tolerance, there may be some dose delivered between the first and the second segment. The amount of the excess dose is higher for larger dose rates and for a smaller number of the total monitor units per IMRT field. The magnitude of the dose errors could be in the order of a few percent. Effects similar to the maximum MLC opening may occur in other situations as well, for instance, when leaves are forced to move over large distances in a short time. Confounding this are dose errors due to the uncertainty in the MLC transmission. The analysis of the actual leaf positions recorded in the dynamic MLC log file is helpful in differentiating between the two types of errors and in determining the optimal dynamic MLC delivery parameters. PACS numbers: 87.53.âj, 87.90.+
Application programming interface guided QA plan generation and analysis automation
PURPOSE: Linear accelerator quality assurance (QA) in radiation therapy is a time consuming but fundamental part of ensuring the performance characteristics of radiation delivering machines. The goal of this work is to develop an automated and standardized QA plan generation and analysis system in the Oncology Information System (OIS) to streamline the QA process.
METHODS: Automating the QA process includes two software components: the AutoQA Builder to generate daily, monthly, quarterly, and miscellaneous periodic linear accelerator QA plans within the Treatment Planning System (TPS) and the AutoQA Analysis to analyze images collected on the Electronic Portal Imaging Device (EPID) allowing for a rapid analysis of the acquired QA images. To verify the results of the automated QA analysis, results were compared to the current standard for QA assessment for the jaw junction, light-radiation coincidence, picket fence, and volumetric modulated arc therapy (VMAT) QA plans across three linacs and over a 6-month period.
RESULTS: The AutoQA Builder application has been utilized clinically 322 times to create QA patients, construct phantom images, and deploy common periodic QA tests across multiple institutions, linear accelerators, and physicists. Comparing the AutoQA Analysis results with our current institutional QA standard the mean difference of the ratio of intensity values within the field-matched junction and ball-bearing position detection was 0.012 ± 0.053 (P = 0.159) and is 0.011 ± 0.224 mm (P = 0.355), respectively. Analysis of VMAT QA plans resulted in a maximum percentage difference of 0.3%.
CONCLUSION: The automated creation and analysis of quality assurance plans using multiple APIs can be of immediate benefit to linear accelerator quality assurance efficiency and standardization. QA plan creation can be done without following tedious procedures through API assistance, and analysis can be performed inside of the clinical OIS in an automated fashion
Clinical application of a template-guided automated planning routine
PURPOSE: Determine the dosimetric quality and the planning time reduction when utilizing a template-based automated planning application.
METHODS: A software application integrated through the treatment planning system application programing interface, QuickPlan, was developed to facilitate automated planning using configurable templates for contouring, knowledge-based planning structure matching, field design, and algorithm settings. Validations are performed at various levels of the planning procedure and assist in the evaluation of readiness of the CT image, structure set, and plan layout for automated planning. QuickPlan is evaluated dosimetrically against 22 hippocampal-avoidance whole brain radiotherapy patients. The required times to treatment plan generation are compared for the validations set as well as 10 prospective patients whose plans have been automated by QuickPlan.
RESULTS: The generations of 22 automated treatment plans are compared against a manual replanning using an identical process, resulting in dosimetric differences of minor clinical significance. The target dose to 2% volume and homogeneity index result in significantly decreased values for automated plans, whereas other dose metric evaluations are nonsignificant. The time to generate the treatment plans is reduced for all automated plans with a median difference of 9\u27 50Ⳡ± 4\u27 33âł.
CONCLUSIONS: Template-based automated planning allows for reduced treatment planning time with consistent optimization structure creation, treatment field creation, plan optimization, and dose calculation with similar dosimetric quality. This process has potential expansion to numerous disease sites
An Expanded Multi-scale Monte Carlo Simulation Method for Personalized Radiobiological Effect Estimation in Radiotherapy: a feasibility study
A novel and versatile ĂąâŹĆbottom-upĂąâŹïżœ approach is developed to estimate the radiobiological effect of clinic
radiotherapy. The model consists of multi-scale Monte Carlo simulations from organ to cell levels. At cellular level, accumulated damages are computed using a spectrum-based accumulation algorithm and predefined cellular damage database. The damage repair mechanism is modeled by an expanded reaction-rate two-lesion kinetic model, which were calibrated through replicating a radiobiological experiment. Multi-scale modeling is then performed on a lung cancer patient under conventional fractionated irradiation. The cell killing effects of two representative voxels (isocenter and peripheral voxel of the tumor) are computed and compared. At microscopic level, the nucleus dose and damage yields vary among all nucleuses within the voxels. Slightly larger percentage of cDSB yield is observed for the peripheral voxel (55.0%) compared to the isocenter one (52.5%). For isocenter voxel, survival fraction increase monotonically at reduced oxygen environment. Under an extreme anoxic condition (0.001%), survival fraction is calculated to be 80% and the hypoxia reduction factor reaches a maximum value of 2.24. In conclusion, with biological-related variations, the proposed multi-scale approach
is more versatile than the existing approaches for evaluating personalized radiobiological effects in
radiotherapy
LINAC based stereotactic radiosurgery for multiple brain metastases: guidance for clinical implementation
Introduction: Stereotactic radiosurgery (SRS) is a promising treatment option for patients with multiple brain metastases (BM). Recent technical advances have made LINAC based SRS a patient friendly
technique, allowing for accurate patient positioning and a short treatment time. Since SRS is increasingly being used for patients with multiple BM, it remains essential that SRS be performed with the
highest achievable quality in order to prevent unnecessary complications such as radionecrosis. The
purpo
Requiring employers in view of the profession of the accountant and preparing for the profession on the post-secondary and higher level
Recommended from our members
Proton-cone-beam-computed-tomography
A prototype proton-cone-beam-computed-tomography (PCB-CT) system utilizing a proton radiatiotherapy beam has been developed. The system acquires CT data in the cone-beam geometry. The cone-beam is produced by scattering a 158.6 MeV narrow parallel proton beam on a range modifier in the form of a linear modulating wheel. The wheel is a PMMA propeller of variable thickness that rotates about its axis parallel to the beam line. The energy spectrum generated by the wheel is designed to result in a monotonically decreasing linear signal versus energy deposited in the detector system. Protons are detected by a system using an intensifying screen and CCD digital camera. The PCB-CT scanner measures relative stopping power of protons in 3D with equal resolution in each dimension. It operates at clinically relevant energies and geometries and in this way facilitates proton therapy planning techniques. The Feldkamp-Davis-Kress cone-beam reconstruction algorithm is applied to obtain the proton stopping powers. Calibration of the proton CT projections is performed with the aid of a stack of PMMA plates positioned in front of the intensifying screen. Contrast and spatial resolution of the PCB-CT scan is evaluated from CT reconstructions of a contrast-resolution phantom. Artifacts in the reconstruction due to neutron noise in the detector system are corrected by a subtraction technique. In addition, computer-simulations of proton CT projection data have been performed. For this purpose, a macroscopic proton transport algorithm has been developed. The algorithm derives from the Boltzmann equation. Energy loss is modeled by using experimental energy-range tables for specific materials, while energy deposition is modeled by using a measured dependence of dose on depth in water (the Bragg curve) and the concept of water equivalent thickness (WET). Nuclear collisions are accounted for by the inclusion of the experimental Bragg curve data in water. The small-angle-approximation is assumed in treating the multiple Coulomb scattering (MCS). Limitations of the PCB-CT in characterizing the relative proton stopping power due to the MCS phenomena are examined. A method of removing the MCS artifacts from the projection data is employed to obtain more accurate reconstructed proton stopping powers
- âŠ