38 research outputs found
A novel method for calibration and monitoring of time synchronization of TOF-PET scanners by means of cosmic rays
All of the present methods for calibration and monitoring of TOF-PET scanner
detectors utilize radioactive isotopes such as e.g. Na or Ge,
which are placed or rotate inside the scanner. In this article we describe a
novel method based on the cosmic rays application to the PET calibration and
monitoring methods. The concept allows to overcome many of the drawbacks of the
present methods and it is well suited for newly developed TOF-PET scanners with
a large longitudinal field of view. The method enables also monitoring of the
quality of the scintillator materials and in general allows for the continuous
quality assurance of the PET detector performance.Comment: 10 pages, 7 figure
Hit time and hit position reconstruction in the J-PET detector based on a library of averaged model signals
In this article we present a novel method of hit time and hit position
reconstruction in long scintillator detectors. We take advantage of the fact
that for this kind of detectors amplitude and shape of registered signals
depends strongly on the position where particle hit the detector. The
reconstruction is based on determination of the degree of similarity between
measured and averaged signals stored in a library for a set of well-defined
positions along the scintillator. Preliminary results of validation of the
introduced method with experimental data obtained by means of the double strip
prototype of the J-PET detector are presented
J-PET analysis framework for the prototype TOF-PET detector
Novel TOF-PET scanner solutions demand, apart from the state of the art
detectors, software for fast processing of the gathered data, monitoring of the
whole scanner and reconstruction of the PET image. In this article we present
an analysis framework for the novel STRIP-PET scanner developed by the J-PET
collaboration in the Institute of Physics of the Jagiellonian University. This
software is based on the ROOT package used in many particle physics
experiments.Comment: 4 pages, 2 figure
Determination of the map of efficiency of the J-PET detector with the GATE package
A novel PET detector consisting of strips of polymer scintillators is being
developed by the J-PET Collaboration. The map of efficiency and the map of
geometrical acceptance of the 2-strip J-PET scanner are presented. Map of
efficiency was determined using the Monte Carlo simulation software GATE based
on GEANT4. Both maps were compared using method based on the chi2 test.Comment: 14 pages, 9 figures, proceeding from conference Symposium on Positron
Emission Tomography: http://koza.if.uj.edu.pl/pet-symposium-2013
Analysis framework for the J-PET scanner
J-PET analysis framework is a flexible, lightweight, ROOT-based software
package which provides the tools to develop reconstruction and calibration
procedures for PET tomography. In this article we present the implementation of
the full data-processing chain in the J-PET framework which is used for the
data analysis of the J-PET tomography scanner. The Framework incorporates
automated handling of PET setup parameters' database as well as high level
tools for building data reconstruction procedures. Each of these components is
briefly discussed.Comment: 6 pages, 1 figur
Test of a single module of the J-PET scanner based on plastic scintillators
Time of Flight Positron Emission Tomography scanner based on plastic
scintillators is being developed at the Jagiellonian University by the J-PET
collaboration. The main challenge of the conducted research lies in the
elaboration of a method allowing application of plastic scintillators for the
detection of low energy gamma quanta. In this article we report on tests of a
single detection module built out from BC-420 plastic scintillator strip (with
dimensions of 5x19x300mm^3) read out at two ends by Hamamatsu R5320
photomultipliers. The measurements were performed using collimated beam of
annihilation quanta from the 68Ge isotope and applying the Serial Data Analyzer
(Lecroy SDA6000A) which enabled sampling of signals with 50ps intervals. The
time resolution of the prototype module was established to be better than 80ps
(sigma) for a single level discrimination. The spatial resolution of the
determination of the hit position along the strip was determined to be about
0.93cm (sigma) for the annihilation quanta. The fractional energy resolution
for the energy E deposited by the annihilation quanta via the Compton
scattering amounts to sigma(E)/E = 0.044/sqrt(E[MeV]) and corresponds to the
sigma(E)/E of 7.5% at the Compton edge.Comment: 12 pages, 6 figures; Updated with editorial corrections related to
publication in NIM