38 research outputs found

    Status of feed resources for cattle rearing in Batticaloa district representing urban, village and remote areas

    Get PDF
    A study was conducted to determine the availability of feed resources for cattle rearing, their distribution and utilization in urban, village and remote areas of Batticaloa district. Eravur, Vantharumoolai and Karadiyanaru were selected for urban, village and remote areas respectively. Fifty farmers were interviewed in each DS division. Stratified random sampling method was used to select the farmers and totally 150 farmers were interviewed. Majority of the farmers in urban area were small holders but majority of village and remote area farmers were medium holders. Most of the farmers in whole study area were practicing extensive or semi intensive rearing system. Most of the farmers reported that major constraints were high cost for concentrate feeds and lack of grasses and grazing land. Paddy straw, rice bran, fodders, grasses kitchen wastes and crop residues were the major available feeds in whole study area. Paddy straw was used by more than 70% of the farmers in each study area. Suitable conditions for feed production and high availability of feeds in the region were the acceptable merits to the cattle rearing. Lack of pasture and fodder production, increasing cost for concentrate feeds, lack of knowledge about preparation of conserved feed materials (urea treated straw, urea molasses multi-nutrient block and silage), less adoption of improved management practices and non-utilization of non-leguminous tree leaves were the major limitations prevailing in the study area

    Surrogate approach to determine heavy metal loads in a moss species – Barbula lambaranensis

    Get PDF
    AbstractBiomonitoring using a moss species Barbula lambaranensis is an economical method for continuous assessment of atmospheric metal pollution. However, frequent measurement of common heavy metals such as Zn, Cd, Cr, Pb, Cu and Ni in moss can be costly for monitoring large areas. Thus, the aim of the study was to use the surrogate approach to reduce the number of heavy metals required for monitoring. The study found that the Zn load in moss was higher; Pb, Cu and Ni loads were moderate; while Cd and Cr were relatively lower across the study sites. Further, the following surrogates were identified based on PCA: Cu for Cr; Pb for Cd, Cu and Ni; and Cu and Pb for Zn. Quantitative relationships between surrogate loads and the loads of other heavy metals were developed by performing Multiple Linear Regression on a data set constructed using a four level full factorial design. The equations had a relative prediction error and standard error of cross validation below 25% and 1.5%, respectively, indicating that the equations are accurate. However, the cross validated coefficient of determination is relatively low suggesting that the precision of prediction using the equations is low, possibly due to the influence of factors such as climatic conditions on bioaccumulation of heavy metals by moss. Nevertheless, the developed equations can be useful for preliminary investigations

    Reply to comment on 'Characterising metal build-up on urban road surfaces' by Egodawatta et al. (2013)

    Get PDF
    In the recent manuscript published by Egodawatta et al. (2013), the authors investigated the build-up process of heavy metals (HMs) associated with road-deposited sediment (RDS) on residential road surfaces, and presented empirical models for the prediction of both the surface loads and build-up rates of HMs on these surfaces..

    An integrated framework for assessing community resilience in disaster management

    Get PDF
    Climate change is predicted to increase the frequency and severity of extreme weather events which pose significant challenges to the ability of government and other relief agencies to plan for, cope with and respond to disasters. Consequently, it is important that communities in climate sensitive and potential disaster prone areas strengthen their resilience to natural disasters in order to expeditiously recover from potential disruptions and damage caused by disasters. Building self reliance and, particularly in the immediate aftermath of a disaster, can facilitate short-term and long-term community recovery. To build stronger and more resilient communities, it is essential to have a better understanding of their current resilience capabilities by assessing areas of strength, risks and vulnerabilities so that their strengths can be enhanced and the risks and vulnerability can be appropriately addressed and mitigated through capacity building programs. While a number of conceptual frameworks currently exist to assess the resilience level of communities to disasters, they have tended to differ on their emphasis, scope and definition of what constitutes community resilience and how community resilience can be most effectively and accurately assessed. These limitations are attributed to the common approach of viewing community resilience through a mono-disciplinary lens. To overcome this, this paper proposes an integrated conceptual framework that takes into account the complex interplay of environmental, social, governance, infrastructure and economic attributes associated with community resilience. The framework can be operationalised using a range of resilience indicators to suit the nature of a disaster and the specific characteristics of a study region

    Influence of physical and chemical parameters on the treatment of heavy metals in polluted stormwater using zeolite - A review

    Get PDF
    Zeolite-based technology can provide a cost effective solution for stormwater treatment for the removal of toxic heavy metals under increasing demand of safe water from alternative sources. This paper reviews the currently available knowledge relating to the effect of properties of zeolites such as pore size, surface area and Si:Al ratio and the physico-chemical conditions of the system such as pH, temperature, initial metal concentration and zeolite concentration on heavy metal removal performance. The primary aims are, to consolidate available knowledge and identify knowledge gaps. It was established that an in-depth understanding of operational issues such as, diffusion of metal ions into the zeolite pore structure, pore clogging, zeolite surface coverage by particulates in stormwater as well as the effect of pH on stormwater quality in the presence of zeolites is essential for developing a zeolite-based technology for the treatment of polluted stormwater. The optimum zeolite concentration to treat typical volumes of stormwater and initial heavy metal concentrations in stormwater should also be considered as operational issues in this regard. Additionally, leaching of aluminium and sodium ions from the zeolite structure to solution were identified as key issues requiring further research in the effort to develop cost effective solutions for the removal of heavy metals from stormwater

    Feasibility of using cold formed steel sections for medium span portal frames in Sri Lanka

    Get PDF
    Cold formed and thin walled steel (CFS) sectional members are used in building industry in many fields around the world. CFS sectional members are combined and used as a primary load bearing members on medium span structures. However use of combined CFS members on medium span portal frames in Sri Lanka is limited due to lack of knowledge. This research is to design and analyze the feasibility of using back to back CFS lipped channels on industrial portal framed building. There were 16 nos. models selected with varying spans of 6m, 9m, 12m and 15m, heights 4m and 6m and bay distance 4m and 6m. The models were first analyzed with computer analysis software called PROKON and optimum sections of back to back combined CFS lipped channels were selected so that it’s serviceability conditions were satisfied. Further the selected section sizes were revised until it’s combined moment and compression overall buckling criteria ( ) ( ) is satisfied. The major feasibility was carried through cost analysis with compared to hot rolled sectional portal frames are being constructed in Sri Lanka’s western region. Therefore the wind speed kept as constant of 140 km/hr (Maximum wind speed in western region). Out of 16 nos. models 14 nos. models shows cost effective ad saving on cost varied from 14% to 21.5% and an average of 12.5%. 4m bay distance is economical than 6m bay distance. 12m span is found to be the most economical span in these models

    Surrogate indicators for assessing community resilience

    Get PDF
    The importance of community resilience to natural disasters is being increasingly recognised. This paper presents an approach for the development of surrogate indicators for comprehensive assessment of community resilience, which is crucial in the context of predicted increase in natural disasters resulting from extreme weather events due to climate change. The use of surrogate indicators is advocated because a comprehensive assessment of community resilience across various thematic areas and associated key areas requires the measurement of a large number of resilience indicators which is not always feasible due to time and resource constraints, To overcome this, researchers tend to use secondary data sources, which are easily available but not always reliable. This highlights the need for surrogate indicators that are easy to measure from reliable primary data sources and are adequate to capture the resilience of a community. Firstly, the paper discusses the two approaches for defining and conceptualising community resilience and the need to account for the complex interrelationships between thematic areas, key areas and resilience indicators and their implications for research. Secondly, a comprehensive framework for the assessment of community resilience is proposed and the difficulties associated with the measurement of overall resilience of the community are discussed. Thirdly, the paper explains a two-step approach to develop surrogate indicators highlighting the necessity and challenges associated with it. Finally, the proposed approach is elaborated with a simple example for better understanding

    Removal of toxic metals in a multi metal system using sorbents for potential application to urban stormwater treatment

    Get PDF
    In the context of increasing demand for potable water and the depletion of water resources, stormwater is a logical alternative. However, stormwater contains pollutants, among which metals are of particular interest due to their toxicity and persistence in the environment. Hence, it is imperative to remove toxic metals in stormwater to the levels prescribed by drinking water guidelines for potable use. Consequently, various techniques have been proposed, among which sorption using low cost sorbents is economically viable and environmentally benign in comparison to other techniques. However, sorbents show affinity towards certain toxic metals, which results in poor removal of other toxic metals. It was hypothesised in this study that a mixture of sorbents that have different metal affinity patterns can be used for the efficient removal of a range of toxic metals commonly found in stormwater. The performance of six sorbents in the sorption of Al, Cr, Cu, Pb, Ni, Zn and Cd, which are the toxic metals commonly found in urban stormwater, was investigated to select suitable sorbents for creating the mixtures. For this purpose, a multi criteria analytical protocol was developed using the decision making methods: PROMETHEE (Preference Ranking Organisation METHod for Enrichment Evaluations) and GAIA (Graphical Analysis for Interactive Assistance). Zeolite and seaweed were selected for the creation of trial mixtures based on their metal affinity pattern and the performance on predetermined selection criteria. The metal sorption mechanisms employed by seaweed and zeolite were defined using kinetics, isotherm and thermodynamics parameters, which were determined using the batch sorption experiments. Additionally, the kinetics rate-limiting steps were identified using an innovative approach using GAIA and Spearman correlation techniques developed as part of the study, to overcome the limitation in conventional graphical methods in predicting the degree of contribution of each kinetics step in limiting the overall metal removal rate. The sorption kinetics of zeolite was found to be primarily limited by intraparticle diffusion followed by the sorption reaction steps, which were governed mainly by the hydrated ionic diameter of metals. The isotherm study indicated that the metal sorption mechanism of zeolite was primarily of a physical nature. The thermodynamics study confirmed that the energetically favourable nature of sorption increased in the order of Zn < Cu < Cd < Ni < Pb < Cr < Al, which is in agreement with metal sorption affinity of zeolite. Hence, sorption thermodynamics has an influence on the metal sorption affinity of zeolite. On the other hand, the primary kinetics rate-limiting step of seaweed was the sorption reaction process followed by intraparticle diffusion. The boundary layer diffusion was also found to limit the metal sorption kinetics at low concentration. According to the sorption isotherm study, Cd, Pb, Cr and Al were sorbed by seaweed via ion exchange, whilst sorption of Ni occurred via physisorption. Furthermore, ionic bonding is responsible for the sorption of Zn. The thermodynamics study confirmed that sorption by seaweed was energetically favourable in the order of Zn < Cu < Cd < Cr . Al < Pb < Ni. However, this did not agree with the affinity series derived for seaweed suggesting a limited influence of sorption thermodynamics on metal affinity for seaweed. The investigation of zeolite-seaweed mixtures indicated that mixing sorbents have an effect on the kinetics rates and the sorption affinity. Additionally, the theoretical relationships were derived to predict the boundary layer diffusion rate, intraparticle diffusion rate, the sorption reaction rate and the enthalpy of mixtures based on that of individual sorbents. In general, low coefficient of determination (R2) for the relationships between theoretical and experimental data indicated that the relationships were not statistically significant. This was attributed to the heterogeneity of the properties of sorbents. Nevertheless, in relative terms, the intraparticle diffusion rate, sorption reaction rate and enthalpy of sorption had higher R2 values than the boundary layer diffusion rate suggesting that there was some relationship between the former set of parameters of mixtures and that of sorbents. The mixture, which contained 80% of zeolite and 20% of seaweed, showed similar affinity for the sorption of Cu, Ni, Cd, Cr and Al, which was attributed to approximately similar sorption enthalpy of the metal ions. Therefore, it was concluded that the seaweed-zeolite mixture can be used to obtain the same affinity for various metals present in a multi metal system provided the metal ions have similar enthalpy during sorption by the mixture

    Mathematical relationships for metal build-up on urban road surfaces based on traffic and land use characteristics

    Get PDF
    The study investigated the influence of traffic and land use parameters on metal build-up on urban road surfaces. Mathematical relationships were developed to predict metals originating from fuel combustion and vehicle wear. The analysis undertaken found that nickel and chromium originate from exhaust emissions, lead, copper and zinc from vehicle wear, cadmium from both exhaust and wear and manganese from geogenic sources. Land use does not demonstrate a clear pattern in relation to the metal build-up process, though its inherent characteristics such as traffic activities exert influence. The equation derived for fuel related metal load has high cross-validated coefficient of determination (Q2) and low Standard Error of Cross-Validation (SECV) values indicates that the model is reliable, while the equation derived for wear-related metal load has low Q2 and high SECV values suggesting its use only in preliminary investigations. Relative Prediction Error values for both equations are considered to be well within the error limits for a complex system such as an urban road surface. These equations will be beneficial for developing reliable stormwater treatment strategies in urban areas which specifically focus on mitigation of metal pollution

    Build-up of toxic metals on the impervious surfaces of a commercial seaport

    Get PDF
    In the context of increasing threats to the sensitive marine ecosystem by toxic metals, this study investigated the metal build-up on impervious surfaces specific to commercial seaports. The knowledge generated in this study will contribute to managing toxic metal pollution of the marine ecosystem. The study found that inter-modal operations and main access roadway had the highest loads followed by container storage and vehicle marshalling sites, while the quay line and short term storage areas had the lowest. Additionally, it was found that Cr, Al, Pb, Cu and Zn were predominantly attached to solids, while significant amount of Cu, Pb and Zn were found as nutrient complexes. As such, treatment options based on solids retention can be effective for some metal species, while ineffective for other species. Furthermore, Cu and Zn are more likely to become bioavailable in seawater due to their strong association with nutrients. Mathematical models to replicate the metal build-up process were also developed using experimental design approach and partial least square regression. The models for Cr and Pb were found to be reliable, while those for Al, Zn and Cu were relatively less reliable, but could be employed for preliminary investigations
    corecore