DEMAND FOR AGRICULTURAL ECONOMIC INFORMATION

Using data gathered in two surveys we analyze the movement of information in agriculture. The relative importance of varying classes of information providers are assessed by classes of users. A network based framework expands models of human capital and bounded rationality to assess the calculus of choice of information.information, bounded rationality, Institutional and Behavioral Economics,

Amplified erosion above waterfalls and oversteepened bedrock reaches

None of the conventional bedrock erosion laws can predict incision immediately upslope of a waterfall lip where the flow is accelerating toward a freefall. Considering the expected increase in flow velocity and shear stress at the lip of a waterfall, we determine erosion amplification at a waterfall lip as [equation], where [equation] is the erosion rate at the upstream end of the flow acceleration zone above a waterfall, Fr is the Froude number at this setting, and n ranges between 0.5–1.7. This amplification expression suggests that erosion at the lip could be as much as 2–5 times higher relative to erosion at a normal setting with identical hydraulic geometry. Utilizing this erosion amplification expression in numerical simulations, we demonstrate its impact on reach-scale morphology above waterfalls. Amplified erosion at the lip of a waterfall can trigger the formation of an oversteepened reach whose length is longer than the flow acceleration zone, provided incision wave velocity (Vi) at the upstream edge of the flow acceleration zone is higher than the retreat velocity of the waterfall face. Such an oversteepened reach is expected to be more pronounced when Vi increases with increasing slope. The simulations also suggest that oversteepening can eventually lead to steady state gradients adjacent to a waterfall lip provided Vi decreases with increasing slope. Flow acceleration above waterfalls can thus account, at least partially, for prevalent oversteepened bedrock reaches above waterfalls. Using the cosmogenic isotope Cl-36, we demonstrate that incision wave velocity upstream of a waterfall at the Dead Sea western escarpment is probably high enough for freefall-induced oversteepening to be feasible

NetFPGA SUME: Toward 100 Gbps as research commodity

The demand-led growth of datacenter networks has meant that many constituent technologies are beyond the budget of the research community. In order to make and validate timely and relevant research contributions, the wider research community requires accessible evaluation, experimentation and demonstration environments with specification comparable to the subsystems of the most massive datacenter networks. We present NetFPGA SUME, an FPGA-based PCIe board with I/O capabilities for 100Gb/s operation as NIC, multiport switch, firewall, or test/measurement environment. As a powerful new NetFPGA platform, SUME provides an accessible development environment that both reuses existing codebases and enables new designs.This work was jointly supported by EPSRC INTERNET Project EP/H040536/1, National Science Foundation under Grant No. CNS-0855268, and Defense Advanced Research Projects Agency (DARPA) and Air Force Research Laboratory (AFRL), under contract FA8750-11-C-0249.This is the author accepted manuscript. The final version is available from IEEE at http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6866035&sortType%3Dasc_p_Sequence%26filter%3DAND%28p_IS_Number%3A5210076%29

NetFPGA - Rapid prototyping of high bandwidth devices in open source

The demand-led growth of datacenter networks has meant that many constituent technologies are beyond the budget of the wider community. In order to make and validate timely and relevant new contributions, the wider community requires accessible evaluation, experimentation and demonstration environments with specification comparable to the subsystems of the most massive datacenter networks. We demonstrate NetFPGA SUME, an open-source FPGA-based PCIe board for rapid prototyping of high bandwidth devices. NetFPGA SUME has I/O capabilities for 100Gbps operation as a networking device, computing unit, or for test and measurement.This work was jointly supported by EPSRC INTERNET Project EP/H040536/1, National Science Foundation under Grant No. CNS-0855268, and Defense Advanced Research Projects Agency (DARPA) and Air Force Research Laboratory (AFRL), under contract FA8750-11-C-0249. The views, opinions, and/or findings contained in this report are those of the authors and should not be interpreted as representing the official views or policies, either expressed or implied, of the National Science Foundation, Defense Advanced Research Projects Agency or the Department of Defense. The Xilinx XUP program has been a long-standing supporter of NetFPGA and the NetFPGA SUME project is only possible with their generous support. We thank the people at Digilent Inc. We thank Micron and Cypress Semiconductor for their generous part donations.This is the author accepted manuscript. The final version is available from IEEE via http://dx.doi.org/10.1109/FPL.2015.729396

NetFPGA: Rapid Prototyping of Networking Devices in Open Source

The demand-led growth of datacenter networks has meant that many constituent technologies are beyond the budget of the wider community. In order to make and validate timely and relevant new contributions, the wider community requires accessible evaluation, experimentation and demonstration environments with specification comparable to the subsystems of the most massive datacenter networks. We demonstrate NetFPGA, an open-source platform for rapid prototyping of networking devices with I/O capabilities up to 100Gbps. NetFPGA offers an integrated environment that enables networking research by users from a wide range of disciplines: from hardware-centric research to formal methods.This work was jointly supported by EPSRC INTERNET Project EP/H040536/1, National Science Foundation under Grant No. CNS-0855268, and Defense Advanced Research Projects Agency (DARPA) and Air Force Research Laboratory (AFRL), under contract FA8750-11-C-0249. The views, opinions, and/or findings contained in this report are those of the authors and should not be interpreted as representing the official views or policies, either expressed or implied, of the National Science Foundation, Defense Advanced Research Projects Agency or the Department of Defense.This is the accepted manuscript. The final version is available at http://dx.doi.org/10.1145/2785956.279002

Sediment source and mixing and the cycle of sediment transport: an example from NE Negev Desert, Israel.

Alluvial terraces represent the end product of sedimentary cycles; each includes sediment generation, transport, accumulation, and the ultimate incision that forms abandoned alluvial surfaces. We examine the middle Pleistocene to recent drainage system evolution in Makhtesh Hazera, Negev Desert, southern Israel and compare the characteristics of erosion and sediment transport in the present system with those expressed by the alluvial terraces. The Hazera drainage basin lies at the margins of the arid to hyper-arid Dead Sea rift (DSR). Makhtesh (crater) Hazera is a deeply incised erosional structure (5X7 km) that has been excavated since the early Pliocene into the crest of the Hazera asymmetric anticline. The Makhtesh floor is surrounded by cliffs rising more than 400 meters high. The cliffs are built of Upper Cretaceous hard carbonates caprocks overlying Lower Cretaceous friable quartz sandstones. Bedrock knickpoints isolate the drainage basin in the Makhtesh and above it from a direct influence of the terminal base level of the DSR. Thus, the accumulation of sediment and abandonment of terraces are controlled by climate and bedrock barriers located at the Makhtesh outlet. We use cosmogenic isotope concentrations to determine bedrock denudation rates, ages of alluvial terraces, and basin wide erosion rates in different channels throughout the basin. The use of cosmogenic isotopes enables us to determine sediment sources and reconstruct sedimentary cycles. OSL dating was used to determine the accumulation ages of alluvial sediment in alluvial terraces. These two methods enable quantitative evaluation of fluvial processes. Bedrock erosion rates suggest a strong dependence of erosion on lithology. While the Lower Cretaceous sandstone erodes at >100 mm ky-1, the overlying hard carbonate caprock yielded cosmogenic isotope concentrations that correspond to erosion rates of 1-3 mm ky-1. This significant difference in erosion rates maintains the dramatic relief of the Hazera drainage basin. We find that the quartz sediment in the present fluvial system of Makhtesh Hazera originates from two predominant sources. One is the Lower Cretaceous sandstone that crops out along the base of the Makhtesh cliffs. The second source are un consolidated Miocene sands that fill the syncline which is located north west of the Makhtesh and is drained into it. 10Be concentrations in successive samples indicate that the Miocene sand is gradually diluted by Lower Cretaceous sand as it flows down stream and the mixing of sediment from both sources is good. Alluvial terraces and bedrock units exposed inside the Makhtesh do not contribute a significant amount of sediment to the present drainage system. Three major alluvial terrace levels were identified. The highest terrace level (MKT0) was abandoned at 279±19 ky. This level probably covered most of the Makhtesh surface. The deposition of the two lower levels, MKT1 and MKT2 (which were abandoned at 160±6 and 47±9 ky, respectively), was confined to the present drainage system. Analysis of cosmogenic depth profiles from the terraces suggests significant recycling of sediment within the Mekhtesh. This is in contrast to the present system that lacks recycled sediment. We explain this difference by the fact that the terraces are the final product of a sedimentary cycle while the present drainage system presents a “snapshot” in time which does not represent the entire cycle only the present state of the system which is expressed by rapid incision and very little lateral migration.European Geosciences Unio

The case for in-network computing on demand

Programmable network hardware can run services traditionally deployed on servers, resulting in orders-of-magnitude improvements in performance. Yet, despite these performance improvements, network operators remain skeptical of in-network computing. The conventional wisdom is that the operational costs from increased power consumption outweigh any performance benefits. Unless in-network computing can justify its costs, it will be disregarded as yet another academic exercise. In this paper, we challenge that assumption, by providing a detailed power analysis of several in-network computing use cases. Our experiments show that in-network computing can be extremely power-efficient. In fact, for a single watt, a software system on commodity CPU can be improved by a factor of x100 using FPGA, and a factor of x1000 utilizing ASIC implementations. However, this efficiency depends on the system load. To address changing workloads, we propose In-Network Computing On Demand, where services can be dynamically moved between servers and the network. By shifting the placement of services on-demand, data centers can optimize for both performance and power efficiency

Getting evidence into policy: The need for deliberative strategies?

Getting evidence into policy is notoriously difficult. In this empirical case study we used document analysis and key informant interviews to explore the Australian federal government’s policy to implement a national bowel cancer screening programme, and the role of evidence in this policy. Our analysis revealed a range of institutional limitations at three levels of national government: within the health department, between government departments, and across the whole of government. These limitations were amplified by the pressures of the 2004 Australian federal election campaign. Traditional knowledge utilisation approaches, which rely principally on voluntarist strategies and focus on the individual, rather than the institutional level, are often insufficient to ensure evidence-based implementation. We propose three alternative models, based on deliberative strategies which have been shown to work in other settings: review of the evidence by a select group of experts whose independence is enshrined in legislation and whose imprimatur is required before policy can proceed; use of an advisory group of experts who consult widely with stakeholders and publish their review findings; or public discussion of the evidence by the media and community groups who act as more direct conduits to the decision-makers than researchers. Such deliberative models could help overcome the limitations on the use of evidence by embedding public review of evidence as the first step in the institutional decision-making processes. Highlights  Achieving evidence-based policy implementation is much harder than the rhetoric suggests.  Our case study showed traditional voluntarist approaches are not enough to overcome institutional filtering of the evidence.  Deliberative strategies open up the decision-making processes to greater expert and public scrutiny.  Our framework illustrates the potential for deliberative strategies to increase the relative weight of evidence in policy.  This article challenges researchers and policy-makers to acknowledge and address the institutional context of decision-making. Keywords: Australia; Health policy; Decision-making; Evidence; Knowledge utilisation; Bowel cancer; Screening; DeliberativeNHMR