Bipolar resistance switching characteristics with opposite polarity of Au/SrTiO3/Ti memory cells

Two types of bipolar resistance switching with eightwise and counter eightwise polarities are observed to coexist in Au/SrTiO3/Ti memory cells. These two types of switching can be induced by different defect distributions which are activated by controlling the electric process. The analyses of I-V and C-V data reveal that the resistance switching with eightwise polarity originates from the change of Schottky barrier at the Au/SrTiO3 interface caused by trapping/detrapping effects at interface defect states, while the switching with counter eightwise polarity is caused by oxygen-vacancy migration

Alternative Telescopic Displacement: An Efficient Multimodal Alignment Method

Feature alignment is the primary means of fusing multimodal data. We propose a feature alignment method that fully fuses multimodal information, which alternately shifts and expands feature information from different modalities to have a consistent representation in a feature space. The proposed method can robustly capture high-level interactions between features of different modalities, thus significantly improving the performance of multimodal learning. We also show that the proposed method outperforms other popular multimodal schemes on multiple tasks. Experimental evaluation of ETT and MIT-BIH-Arrhythmia, datasets shows that the proposed method achieves state of the art performance.Comment: 8 pages,7 figure

Target-driven sustainable product development

Figuring in sustainability in product development requires a profound understanding of the cause and effect of engineering decisions along the full spectrum of the product lifecycle and the triple bottomline of sustainability. Sustainability design targets can contribute to mitigating the complexity involved, by means of a formalised problem description. This article discusses how sustainability design targets can be defined and presents methods for systematically implementing these targets into the design process. To that end, different means of decision support mechanisms are presented. They comprise (a) use cases of target breakdowns in subsystems, (b) systematic reduction of solution space and (c) assistance in design activities to ensure achievement of sustainability design targets. This paper explains how interfaces to engineering tools such as Computer Aided Design/Engineering (CAD/CAE) or Product Data/Lifecycle Management (PDM/PLM) can be put in place to make the process of retrieving information and providing decision support more seamless

Are Farmers Willing to Pay for Centralized Mode Provision of Rural Domestic Sewage Treatment? A Large-Scale Assessment in North China

peer reviewedEvaluation of farmers’ willingness to participate (WTPP) and willingness to pay (WTP) for the centralized mode provision (CMP) of rural domestic sewage treatment (RDST) is imperative to improve the rural environment as well as to alleviate government financial pressures. This study adopted the contingent valuation method as well as face-to-face interview questionnaires to assess rural residents’ provision mode preferences, WTPP, and WTP for the CMP of RDST in China. Based on 761 samples collected from Shandong, Jilin, and Gansu provinces of China, we applied econometric models to estimate farmers’ WTPP and WTP for the CMP of RDST and explore the potential influencing factors, respectively. Results show that 1) 81.87% of the farmers would be willing to contribute to CMP of RDST; 2) farmers’ perceptions of the necessity of RDST, pollution of rural domestic sewage, and government propaganda significantly and positively affect their WTP; and 3) the expected WTP for CMP of RDST with the total respondents and the respondents with positive WTPP were estimated to be 7.59 USD/year and 10.10 USD/year (for a total of 20 years), accounting for 16.28 and 21.65% of construction costs, respectively. Based on these outcomes, it could be further estimated that the aggregate value was between 179.05 million USD/year and 238.26 million USD/year which implied that the farmers’ WTP may be a potentially non-negligible funding source for the CMP of RDST. The enhancement of environmental awareness of farmers and strengthening of propaganda should be the next priority of the Chinese government. Priority should also be assigned to villages closer to towns when the government formulates relevant strategies and policies. The results of this study provide references for policy formulation related to broadening the funding sources in RDST and exploring farmer payment mechanisms and implications for other developing countries

Degradation of Glyphosate in Soil Photocatalyzed by Fe3O4/SiO2/TiO2 under Solar Light

In this study, Fe3O4/SiO2/TiO2 photocatalyst was prepared via a sol-gel method, and Fe3O4 particles were used as the core of the colloid. Diffraction peaks of Fe3O4 crystals are not found by XRD characterization, indicating that Fe3O4 particles are well encapsulated by SiO2. FTIR characterization shows that diffraction peaks of Ti-O-Si chemical bonds become obvious when the Fe3O4 loading is more than 0.5%. SEM characterization indicates that agglomeration occurs in the Fe3O4/SiO2/TiO2 photocatalyst, whereas photocatalysts modified by Fe3O4/SiO2 present excellent visible light absorption performance and photocatalytic activity, especially when the Fe3O4 loading is 0.5%. Photocatalytic degradation of glyphosate in soil by these photocatalysts under solar irradiation was investigated. Results show that 0.5% Fe3O4/SiO2/TiO2 has the best photocatalytic activity. The best moisture content of soil is 30%∼50%. Degradation efficiency of glyphosate reaches 89% in 2 h when the dosage of photocatalyst is 0.4 g/100 g (soil), and it increased slowly when more photocatalyst was used. Soil thickness is a very important factor for the photocatalytic rate. The thinner the soil is, the better the glyphosate degradation is. Degradation of glyphosate is not obviously affected by sunlight intensity when the intensity is below 6 mW/cm2 or above 10 mW/cm2, but it is accelerated significantly when the sunlight intensity increases from 6 mW/cm2 to 10 mW/cm2

Diploid mycelia of Ustilago esculenta fails to maintain sustainable proliferation in host plant

Smut fungi display a uniform life cycle including two phases: a saprophytic phase in vitro and a parasitic phase in host plants. Several apathogenic smut fungi are found, lacking suitable hosts in their habitat. Interestingly, MT-type Ustilago esculenta was found to maintain a parasitic life, lacking the saprophytic phase. Its long period of asexual proliferation in plant tissue results in severe defects in certain functions. In this study, the growth dynamics of U. esculenta in plant tissues were carefully observed. The mycelia of T- and MT-type U. esculenta exhibit rapid growth after karyogamy and aggregate between cells. While T-type U. esculenta successfully forms teliospores after aggregation, the aggregated mycelia of MT-type U. esculenta gradually disappeared after a short period of massive proliferation. It may be resulted by the lack of nutrition such as glucose and sucrose. After overwintering, infected Zizania latifolia plants no longer contained diploid mycelia resulting from karyogamy. This indicated that diploid mycelia failed to survive in plant tissues. It seems that diploid mycelium only serves to generate teliospores. Notably, MT-type U. esculenta keeps the normal function of karyogamy, though it is not necessary for its asexual life in plant tissue. Further investigations are required to uncover the underlying mechanism, which would improve our understanding of the life cycle of smut fungi and help the breeding of Z. latifolia

Discussion on Prefabricated Concrete Structure Design Method under BIM Technology

BIM is a data tool used in various stages of design, construction and management. It can integrate different models of buildings and realize sharing and transmission during the life cycle of the project, ensuring that engineering technicians can access different building information with a correct understanding and real-time response, it lays a good foundation for different participants including design, construction and management to achieve collaborative work. It is very important whether it is to ensure production efficiency, save costs and shorten construction periods. For the newly emerging prefabricated buildings, their structural design will become more efficient, accurate and reasonable due to the introduction of BIM technology

Wireless Network SecurityTheories and Applications /

X, 274 p. 60 illus.online resource

An Endoglucanase Secreted by Ustilago esculenta Promotes Fungal Proliferation

Ustilago esculenta is a fungus of two morphological forms, among the filamentous dikaryon that can induce the plant stem to expand to form fleshy stem. In order to establish biotrophy with Zizania latifolia which belongs to the tribe Oryzeae (Poaceae), U. esculenta firstly needs to secrete a bunch of effectors, among them being cell wall degrading enzymes (CWDEs). We have isolated a gene, UeEgl1, which was differentially expressed in MT-type and T-type U. esculenta at an early stage of infection, and specifically induced in the filamentous growth of the T-type. Bioinformatics analysis and enzyme activity assay indicated that UeEgl1 functions outside the cell as a β-1,4-endoglucanase with a conserved domain of the glycosyl hydrolase family 45 (GH45) which targets the main component of the plant cell wall β-1,4 linked glycosidic bonds. The phenotype analysis of UeEgl1 deletion mutants and UeEgl1 over-expression transformants showed that UeEgl1 had no significant effect on the budding, cell fusion, and filamentous growth of U. esculenta in vitro. Further study found that over-expression of UeEgl1 promoted the proliferation of mycelia inside Z. latifolia, and raised plant defense responses. The above results show that the UeEgl1 gene may play an important role in the early stage of infection through the decomposition of the plant cell wall