507 research outputs found

    Effect of fibre treatments on mechanical properties of flax/tannin composites

    Get PDF
    Due to the inherent environmental benefits of using natural resin (tannin) and natural fibre (flax), flax/tannin composites could be potentially used for vehicle applications. One of the main limitations is the hydrophilic property of flax, resulting in the poor fibre/hydrophobic matrix interface quality. Alkali, acetylation, silane treatment and enzymatic treatment were selected to modify non-woven flax mats to prepare the composites. The fibre morphology was studied through scanning electronic microscopes (SEM). The effects of fibre pre-treatments on dynamic and static mechanical properties of composites were investigated through adequate experiments, such as dynamic mechanical analysis (DMA) and static tensile testing. The modified rougher fibre surface broadened the glass transition peaks of composites due to the improved surface adhesion. However, there is no big improvement of tensile strength after modifications. The pure NaOH (sodium hydroxide) treated composites remain the tensile properties and offer good flax/tannin wettability

    Improving mechanical properties of novel flax/tannin composites through different chemical treatments

    Get PDF
    Due to the inherent environmental benefits of using renewable materials, mimosa tannin resin (a natural phenolic resin) reinforced by flax fibres could offer desirable characteristics (lightweight, economic and low environmental impact) aiming at reducing carbon footprint of superlight electric vehicles. The non-woven flax mats were chemically treated (alkali, acetylation, silane and enzymatic treatment) to prepare tannin composites through compression moulding (130 °C/35 min/1.5 MPa). The change in fibre morphology was seen in SEM (scanning electronic microscope) images. The treatments (except enzymatic) showed significant improvement in tensile properties, along with enhancement (acetylation) in flexural properties, but little effect on impact resistance for all treatments. APS (aminopropyl triethoxy siloxane) treated composites showed highest tensile strength of 60 MPa and modulus of 7.5 GPa. BTCA (butanetetracarboxylic acid) treatment led to the highest flexural strength of up to 70 MPa. NaOH treatment retained the impact failure force of about 0.5 kN and sustained the saturation energy (4.86 J) compared to untreated composites (4.80 J)

    Novel hybrid flax reinforced supersap composites in automotive applications

    Get PDF
    Flax fibre bio-epoxy composites have not found many commercial uses in structural applications on account of their lack of cost efficiency and high susceptibility to environmental changes. Non-woven flax mats were subjected to alkali, acetylation, silane and enzymatic treatment, and then combined with untreated unidirectional (UD) flax fabrics to make hybrid flax bio-epoxy composites. Mechanical and environmental resistance (aging) tests were performed on the treated flax fibres. The glass transition temperature was detected at about 75 °C with little effect of treatments. Untreated composites were found to have a tensile strength of 180 MPa while no significant improvement was observed for any of the treatments, which are also not environmentally friendly. The amiopropyltriethoxysilane (APS) composites after Xenon aging, retained the tensile strength of 175 MPa and a modulus of 11.5 GPa, while untreated composites showed 35% reduction in elastic modulus

    Encapsulation of cancer therapeutic agent dacarbazine using nanostructured lipid carrier

    Get PDF
    The only formula of dacarbazine (Dac) in clinical use is intravenous infusion, presenting a poor therapeutic profile due to the low dispersity of the drug in aqueous solution To overcome this, a nanostructured lipid carrier (NLC) consisting of glyceryl palmitostearate and isopropyl myristate was developed to encapsulate Dac. NLCs with controlled size were achieved using high shear dispersion (HSD) following solidification of oil-in-water emulsion. The synthesis parameters, including surfactant concentration, the speed and time of HSD were optimized to achieve the smallest NLC with size, polydispersion index and zeta potential of 155 ± 10 nm, 0.2 ± 0.01, and -43.4 ± 2 mV, respectively. The optimal parameters were also employed for Dac-loaded NLC preparation. The resultant NLC loaded with Dac possessed size, polydispersion index and zeta potential of 190 ± 10 nm, 0.2 ± 0.01, and -43.5 ± 1.2 mV, respectively. The drug encapsulation efficiency and drug loading reached 98% and 14%, respectively. This is the first report on encapsulation of Dac using NLC, implying that NLC could be a new potential candidate as drug carrier to improve the therapeutic profile of Dac

    Safety assessment of novel polymer-silicon composites - from LCA perspective

    Get PDF
    The fast growing trend in the development of novel materials with potential applications in many industrial sectors has caused concerns over the environment and human health effect of the emerging activities and associated products. It is imperative that these concerns are addressed in a holistic manner as early as possible. As part of the NEPHH project, this study applied the LCA concept aiming to identify hazardous nanoparticles (NP) that could be released during the development and application of novel products, focusing on polymeric-silicon composites in recognition of their attractions to a wide range of industries, including construct engineering, automotive and aerospace

    Responses of genes involved in cell cycle control to diverse DNA damaging chemicals in human lung adenocarcinoma A549 cells

    Get PDF
    BACKGROUND: Many anticancer agents and carcinogens are DNA damaging chemicals and exposure to such chemicals results in the deregulation of cell cycle progression. The molecular mechanisms of DNA damage-induced cell cycle alteration are not well understood. We have studied the effects of etoposide (an anticancer agent), cryptolepine (CLP, a cytotoxic alkaloid), benzo [a]pyrene (BaP, a carcinogenic polycyclic aromatic hydrocarbon) and 2-amino-1-methyl-6-phenylimidazo [4,5-b]pyridine (PhIP, a cooked-meat derived carcinogen) on the expression of cell cycle regulatory genes to understand the molecular mechanisms of the cell cycle disturbance. RESULTS: A549 cells were treated with DMSO or chemicals for up to 72 h and periodically sampled for cell cycle analysis, mRNA and protein expression. DMSO treated cells showed a dominant G1 peak in cell cycle at all times examined. Etoposide and CLP both induced G2/M phase arrest yet the former altered the expression of genes functioning at multiple phases, whilst the latter was more effective in inhibiting the expression of genes in G2-M transition. Both etoposide and CLP induced an accumulation of p53 protein and upregulation of p53 transcriptional target genes. Neither BaP nor PhIP had substantial phase-specific cell cycle effect, however, they induced distinctive changes in gene expression. BaP upregulated the expression of CYP1B1 at 6–24 h and downregulated many cell cycle regulatory genes at 48–72 h. By contrast, PhIP increased the expression of many cell cycle regulatory genes. Changes in the expression of key mRNAs were confirmed at protein level. CONCLUSION: Our experiments show that DNA damaging agents with different mechanisms of action induced distinctive changes in the expression pattern of a panel of cell cycle regulatory genes. We suggest that examining the genomic response to chemical exposure provides an exceptional opportunity to understand the molecular mechanism involved in cellular response to toxicants
    • …
    corecore