49 research outputs found
Electrical response and pore structure evolution affected by cyclical plasma breakdown
Artificial improvement of coal seam permeability is the key to solve the low gas drainage efficiency and prevent gas dynamic disaster. Plasma based on physical discharge is one of the effective means of coal seam antireflection. However, previous studies focus on the characterization of pore-fissure structure of single breakdown, ignore the polarization effect of plasma on coal, and lack of in-depth research on the electrical properties and the evolution characteristics of pore-fissure structure under the action of cyclical plasma of loaded coal. In this paper, the cyclical plasma breakdown experiments of coal samples were carried out. The voltage and current waveforms in the process of coal breakdown were monitored thorough combining with high-voltage attenuation rod and the Roche coil, and the variation of electrical parameters such as pre-breakdown period, plasma breakdown period, number of wave peaks, peak voltage, peak current and energy conversion efficiency were analyzed. The evolution of small pores, medium pores, large pores and micro cracks under the conditions of 1, 5, 10, 15 and 20 times of breakdown was tested by NMR. The fractal dimension of seepage pore was also discussed through geometric fractal theory. The results show that the pre-breakdown period is at the level of thousands of microseconds only for the first time, and then it will drop to tens of microseconds, while the plasma breakdown period shows a âladderâ growth with the increase of breakdown times. The energy conversion efficiency is maintained at 28.7%â55.9%, showing a trend of rapid increase at first and then stable, indicating that the polarization effect of plasma on the electrical properties of coal is limited. The growth rate of medium and large pores is the most obvious, and some micro fracture structures will achieve a â0â breakthrough, indicating that plasma will significantly improve the seepage of gas. The fractal dimension shows a decreasing trend after breakdown, which proves that the originally isolated pore structure will be connected by the fracture from the perspective of pore fracture space dimension. The similarity between the change trend of porosity and energy conversion efficiency shows that plasma has an impact on the electrical properties of coal, and the change of coal electrical properties will also have an impact on the distribution of plasma channels
Recommended from our members
Experimental investigation into coal wettability changes caused by reactions with scCO2-H2O
Geological CO2 sequestration (GCS) can help mitigate global warming and enhance methane recovery from coal beds. However, few studies have linked the effects of CO2 to surface chemistry changes controlling wetting behavior in deep coal beds. Contact angles (CAs) of CO2/N2-high volatile bituminous coal-water systems were measured under different temperatures and pressures. The surface chemistry and physical structure of coals were characterized to investigate changes in physicochemical properties and their relations with wettability after reactions. For N2 treatment, the time-dependence of static and dynamic CAs were insignificant, ranging within 4°. For gaseous CO2 treatment, the static CAs and the average advancing angles increased slightly. With supercritical (sc) CO2, both the static and dynamic CAs increased significantly, and θ adv changed to intermediate-wet (92°). Reactions with minerals exposed to scCO2 resulted in greater surface roughness and heterogeneity, greater contact angle hysteresis and more surface sites occupied by scCO2 rather than H2O. Increases in hydrophobic functional groups and decreases in hydrophilicity were shown by FTIR spectra, reflecting the shedding of polar oxygen-containing functional groups, reduction of hydrogen bonds, and increasing percentage of hydrocarbons. XRD patterns obtained following scCO2-treatment showed that crystallite growth and molecular polymerization were higher toward graphite-like. The calculated structural parameters of functional groups and crystallites both showed elevated coal rank. Changes in crystallite structure, notably higher carbon content and decreased negative surface charge, are unfavorable for water-wetting. This study contributes to understanding surface chemistry changes responsible for decreased wettability during CO2-enhanced coal bed methane recovery and GCS in coal reservoirs
Vortex-induced Shear Polaritons
Hyperbolic shear polaritons (HShPs) emerge with widespread attention as a new
class of polariton modes with broken symmetry due to shear lattices. In this
letter, we find a new mechanism of generating HShPs. When utilizing vortex
waves as excitation sources of hyperbolic materials without off-diagonal
elements, HShPs will appear. In addition, this asymmetric HShPs can be
recovered as symmetric modes away from the source, with a critical transition
mode between the left-skewed and right-skewed HShPs, via tuning the magnitude
of the off-diagonal imaginary component and controlling the topological charge
of vortex source. It is worth mentioning that we explore the influence of
parity of topological charges on the field distribution and demonstrate these
exotic phenomena from numerical and analytical perspectives. Our results will
promote new opportunities for both HShPs and vortex waves, widening the horizon
for various hyperbolic materials based on vortex sources and offering a new
degree of freedom to control various kinds of polaritons
Influence of coupled effect among flaw parameters on strength characteristic of precracked specimen: Application of response surface methodology and fractal method
Hydraulic slotting is an effective method for enhanced coalbed methane (ECBM) recovery, and it has been widely employed in China. Although there have been many studies of this technique, the influence of slot parameters on the strength characteristic of the coal, which is an important factor that affects the permeability enhancement effect, has rarely been studied. Thus, only limited information is available regarding the pressure relief and permeability enhancement mechanisms of this technique. In the current study, the influence of flaw parameters on the compressive strength of a precracked sample under biaxial compression is discussed. The results indicate that an increase in the flaw length and width has a negative effect on the compressive strength, whereas an increase in the flaw inclination angle has a positive effect on the compressive strength. The results of the response surface methodology (RSM) indicate that the interactions among the flaw parameters have a significant influence on the compressive strength. The propagation patterns of cracks are quantified by the fractal dimension, which is used to explore the mechanism of compressive strength variation with changes in the flaw parameters. The study results indicate that the variation in the flaw parameters changes the propagation pattern of cracks, resulting in different compressive strengths. In addition, an opposite variation trend of the compressive strength and fractal dimension with flaw parameters is also observed. The research results are expected to guide the field application of hydraulic slotting
Novel integrated techniques of drilling-slotting-separation-sealing for enhanced coal bed methane recovery in underground coal mines
Coal bed Methane (CBM), a primary component of natural gas, is a relatively clean source of energy. Nevertheless, the impact of considerable coal mine methane emission on climate change in China has gained an increasing attention as coal production has powered the country's economic development. It is well-known that coal bed methane is a typical greenhouse gas, the greenhouse effect index of which is 30 times larger than that of carbon dioxide. Besides, gas disasters such as gas explosive and outburst, etc. pose a great threat to the safety of miners. Therefore, measures must be taken to capture coal mine methane before mining. This helps to enhance safety during mining and extract an environmentally friendly gas as well. However, as a majority of coal seams in China have low-permeability, it is difficult to achieve efficient methane drainage. Enhancing coal permeability is a good choice for high-efficiency drainage of coal mine methane. In this paper, a modified coal-methane co-exploitation model was established and a combination of drillingâslotting-separationâsealing was proposed to enhance coal permeability and CBM recovery. Firstly, rapid drilling assisted by water-jet and significant permeability enhancement via pressure relief were investigated, guiding the fracture network formation around borehole for high efficient gas flow. Secondly, based on the principle of swirl separation, the coalâwaterâgas separation instrument was developed to eliminate the risk of gas accumulation during slotting and reduce the gas emission from the ventilation air. Thirdly, to improve the performance of sealing material, we developed a novel cement-based composite sealing material based on the microcapsule technique. Additionally, a novel sealingâisolation combination technique was also proposed. Results of field test indicate that gas concentration in slotted boreholes is 1.05â1.91 times higher than that in conventional boreholes. Thus, the proposed novel integrated techniques achieve the goal of high-efficiency coal bed methane recovery
MSPoisDM: A Novel Peptide Identification Algorithm Optimized for Tandem Mass Spectra
Tandem mass spectrometry (MS/MS) plays an extremely important role in proteomics research. Thousands of spectra can be generated in modern experiments, how to interpret the LC-MS/MS is a challenging problem in tandem mass spectra analysis. Our peptide identification algorithm, MSPoisDM, is integrated the intensity information which produced by target-decoy statistics, although intensity information often undervalued. Furthermore, in order to combine the intensity information for better, we propose a novel concept scoring model which based on Poisson distribution. Compared with commonly used commercial software Mascot and Sequest at 1% FDR, the results show MSPoisDM is robust and versatile for various datasets which obtained from different instruments. We expect our algorithm MSPoisDM will be broadly applied in the proteomics studies