999 research outputs found
A novel traveling-wave-based method improved by unsupervised learning for fault location of power cables via sheath current monitoring
In order to improve the practice in maintenance of power cables, this paper proposes a novel traveling-wave-based fault location method improved by unsupervised learning. The improvement mainly lies in the identification of the arrival time of the traveling wave. The proposed approach consists of four steps: (1) The traveling wave associated with the sheath currents of the cables are grouped in a matrix; (2) the use of dimensionality reduction by t-SNE (t-distributed Stochastic Neighbor Embedding) to reconstruct the matrix features in a low dimension; (3) application of the DBSCAN (density-based spatial clustering of applications with noise) clustering to cluster the sample points by the closeness of the sample distribution; (4) the arrival time of the traveling wave can be identified by searching for the maximum slope point of the non-noise cluster with the fewest samples. Simulations and calculations have been carried out for both HV (high voltage) and MV (medium voltage) cables. Results indicate that the arrival time of the traveling wave can be identified for both HV cables and MV cables with/without noise, and the method is suitable with few random time errors of the recorded data. A lab-based experiment was carried out to validate the proposed method and helped to prove the effectiveness of the clustering and the fault location
Indium tin oxide (ITO) deposition, patterning and Schottky contact fabrication
As a transparent conductive material, indium tin oxide (ITO) has been utilized as electrodes in liquid crystal displays, solar cells, heat reflecting films and gas sensors. In general, the desired properties are high conductance and transmission. However, due to the complexity of ITO, the film properties strongly depend on the deposition processes. In this study, the deposition conditions for ITO film were optimized to get both high conductivity and transmission. The emphasis was on investigating the effects of various deposition parameters, such as oxygen partial pressure, total gas flow, annealing conditions and power. These are the most critical parameters for ITO deposition. A mathematical model to describe the material properties as functions of these parameters for a CVC model 601 Sputterer was developed utilizing JMP IN software. Films with resistivity 3x10-4Ω-cm and transmittance above 90% were achieved on glass and silicon substrates with 20 hours of annealing. The processing window (power: 120-150W, oxygen ratio: 6-10%) is, to the author’s knowledge, the largest reported by literature. However, the ITO film properties (electrical and optical) variation between runs needs to be further reduced. Patterning of ITO was also investigated. High but controllable etch rates are desired. Both wet and dry etch processes were developed. The etch rate of 48nm/min was achieved by using HCL aqueous solution (4:1 HCl to DI water volumetric ratio, where HCl is the standard 37% HCl solution) with almost infinite selectivity between the ITO film and the photoresisit. For dry etch, the etch rate is 1nm/min with just argon as the working gas and the etching selectivity between the photoresist and the ITO film is 13.02. To etch 100nm ITO film, the photoresist needs to be at least 1.5um to serve as etching mask. This dry etch process still needs to be improved. A Schottky contact was successfully fabricated by using ITO as the metal. The electrical barrier height was calculated to be 1.01eV. The current-voltage characteristics were investigated as well
Distributed Kalman Filters over Wireless Sensor Networks: Data Fusion, Consensus, and Time-Varying Topologies
Kalman filtering is a widely used recursive algorithm for optimal state estimation of linear stochastic dynamic systems. The recent advances of wireless sensor networks (WSNs) provide the technology to monitor and control physical processes with a high degree of temporal and spatial granularity. Several important problems concerning Kalman filtering over WSNs are addressed in this dissertation. First we study data fusion Kalman filtering for discrete-time linear time-invariant (LTI) systems over WSNs, assuming the existence of a data fusion center that receives observations from distributed sensor nodes and estimates the state of the target system in the presence of data packet drops. We focus on the single sensor node case and show that the critical data arrival rate of the Bernoulli channel can be computed by solving a simple linear matrix inequality problem. Then a more general scenario is considered where multiple sensor nodes are employed. We derive the stationary Kalman filter that minimizes the average error variance under a TCP-like protocol. The stability margin is adopted to tackle the stability issue. Second we study distributed Kalman filtering for LTI systems over WSNs, where each sensor node is required to locally estimate the state in a collaborative manner with its neighbors in the presence of data packet drops. The stationary distributed Kalman filter (DKF) that minimizes the local average error variance is derived. Building on the stationary DKF, we propose Kalman consensus filter for the consensus of different local estimates. The upper bound for the consensus coefficient is computed to ensure the mean square stability of the error dynamics. Finally we focus on time-varying topology. The solution to state consensus control for discrete-time homogeneous multi-agent systems over deterministic time-varying feedback topology is provided, generalizing the existing results. Then we study distributed state estimation over WSNs with time-varying communication topology. Under the uniform observability, each sensor node can closely track the dynamic state by using only its own observation, plus information exchanged with its neighbors, and carrying out local computation
Distributed Stabilization of Nonlinear Multi-Agent Systems
The study of multi-agent systems (MASs) is focused on systems in which many autonomous agents interact and operate within a limited communication environment. The general goal of the MAS research is to design interconnection control laws such that all the dynamic agents in the group are synchronized to a desired common trajectory by exchanging information with adjacent agents over certain constrained communication networks. Based on the review and modification of existing results concerning the consensus control of linear heterogeneous MASs in Moreau (2004) [21], Scardovi and Sepulchre (2009) [25], Wieland et al (2011) [30], and Alvergue et al. (2013) [1], this thesis investigates the distributed stabilization of the heterogeneous MAS, consisting of N different continuous-time nonlinear dynamic systems, under connected communication graphs. The conditions for a nonlinear dynamic agent to be feedback equivalent to a strictly passive system are derived along with the feedback law. A distributed stabilization control protocol using state feedback is then proposed under the idea of feedback connection of two passive systems. It proves to be sufficient for only one or a few agents to have access to the reference signal for the MAS to achieve stability, which lowers the communication overhead from the reference to different agents. The result can be interpreted as an extension of the stabilizing law for linear MASs introduced in [1], and considered as a fundamental preliminary for the consensus research for nonlinear MASs in the future
A Design of Dual Broadband Antenna in Mobile Communication System
A design of dual broadband antenna is proposed in this paper; it consists of one low frequency unit and two high frequency units. The low frequency unit consists of a pair of printing vibrators; the high frequency unit consists of a pair of printing oscillators, which is bent at its end, and high frequency unit and low frequency unit are set on the same dielectric substrate. Through adding a parasitic unit on antenna, it can enhance frequency bandwidth without affecting the bandwidth. In the high frequency unit, it adopts gap-coupled microstrip line feeding method in order to get enough bandwidth. Through the test of dual broadband antenna, it can be found that, in the low frequency part, the antenna covers 20% bandwidth of the total bandwidth, and it covers the frequency from 800 MHz to 980 MHz. In the high frequency, the antenna covers 60% of total bandwidth and its frequency is from 1540 MHz to 2860 MHz, so the designed antenna can satisfy the frequency requirements of 2G/3G/LTE (4G) communication system
- …