120 research outputs found
Numerical Simulation and Experimental Study of the Tube Receiver's Performance of Solar Thermal Power Tower
AbstractA water-vapor tube receiver is a significant component in the solar thermal power tower plant. However, the tube flow performance is much different from others. Because semi-circumference of the tube is heated with an uneven heat flux, which is into a Gaussian distribution in this paper, and the other semi-circumference is insulated. A 5kW- Xe-arc lamp was used to simulate a solar light source. In this study, the effect of different entrance velocity on the flow performance and thermal efficiency of the tube receiver are investigated with numerical and experimental methods. The results of experiment and simulation agree well. The results show that the temperature distribution of water and tube wall are very uneven both in the axial and radial directions. The thermal efficiency of the tube receiver increases with the increase of entrance velocity
Premixed jet flame characteristics of syngas using OH planar laser induced fluorescence
Lean premixed flame characteristics of several typical low calorific value (LCV) syngases (basis CO/H-2/CH4/CO2/N-2), including bituminous coal, wood residue, corn core, and wheat straw gasification syngas, were investigated using OH planar laser induced fluorescence (PLIF) technology. OH radical distributions within the turbulent flame were measured for different turbulence intensities. Flame structures of syngases were analyzed and characterized with respect to burnt and unburnt regions, flame curvature (sharp cusp), local extinction (holes and penetration), OH reaction layer thickness, wrinkling, and other features, with OH-PLIF instantaneous images and statistical analysis. Results show that H-2 content, LCV, and turbulence intensity are the most effective factors influencing the OH radical intensity and thickness of OH radical layers. The bituminous coal gasification syngas with relatively higher LCV and H-2 content tends to burn out easily. Through changes in thickness of the OH radical layers and signal intensities, the reaction layer can be compressed by intensifying turbulence and thereby the combustion processes of syngas
Boosting biomethane yield and production rate with graphene: the potential of direct interspecies electron transfer in anaerobic digestion
Interspecies electron transfer between bacteria and archaea plays a vital role in enhancing energy efficiency of anaerobic digestion (AD). Conductive carbon materials (i.e. graphene nanomaterial and activated charcoal) were assessed to enhance AD of ethanol (a key intermediate product after acidogenesis of algae). The addition of graphene (1.0 g/L) resulted in the highest biomethane yield (695.0 ± 9.1 mL/g) and production rate (95.7 ± 7.6 mL/g/d), corresponding to an enhancement of 25.0% in biomethane yield and 19.5% in production rate. The ethanol degradation constant was accordingly improved by 29.1% in the presence of graphene. Microbial analyses revealed that electrogenic bacteria of Geobacter and Pseudomonas along with archaea Methanobacterium and Methanospirillum might participate in direct interspecies electron transfer (DIET). Theoretical calculations provided evidence that graphene-based DIET can sustained a much higher electron transfer flux than conventional hydrogen transfer
Improving fermentative hydrogen and methane production from an algal bloom through hydrothermal/steam acid pretreatment
Algal blooms can be harvested as renewable biomass waste for gaseous biofuel production. However, the rigid cell structure of raw algae may hinder efficient microbial conversion for production of biohydrogen and biomethane. To improve the energy conversion efficiency, biomass from an algal bloom in Dianchi Lake was subjected to a hydrothermal/steam acid pretreatment prior to sequential dark hydrogen fermentation and anaerobic digestion. Results from X-ray diffraction and Fourier transform infrared spectroscopy suggest that hydrothermal acid pretreatment leads to stronger damage of the amorphous structure (including hemicellulose and amorphous cellulose) due to the acid pretreatment, as evidenced by the higher crystallinity index. Scanning electron microscopy analysis showed that smaller fragments (∼5 mm) and wider cell gaps (∼1 μm) on algal cell surfaces occurred after pretreatment. In comparison to steam acid pretreatment, hydrothermal acid pretreatment resulted in a maximum energy conversion efficiency of 44.1% as well as production of 24.96 mL H2/g total volatile solids (TVS) and 299.88 mL CH4/g TVS
Numerical simulation of acoustic wake effect in acoustic agglomeration under Oseen flow condition
An Intercomparison between ERA-Interim Reanalysis and Observed Precipitation in Northeast China
Recently, the European Center for Medium-Range Weather Forecasts (ECMWF) released a new set of reanalysis data—ERA-Interim. We make an intercomparison between ERA-Interim precipitation and observed precipitation in Northeast China. The results show that, in general, the ERA-Interim reanalysis precipitation data can describe the spatial and temporal characteristics of seasonal precipitation in Northeast China well. In terms of spatial distribution, ERA-Interim precipitation is generally consistent with the observation data in different seasons in Northeast China. There is a larger difference in the center of Northeast China than in other areas between the two kinds of data. The ERA-Interim precipitation is larger than observed precipitation in most of Northeast China. In spring, autumn, and winter, the ERA-Interim precipitation value is close to the observation one, while in summer there is a large difference in Liaoning Peninsula and Changbai Mountain between the two kinds of precipitation data. In terms of temporal characteristics, the time series of the ERA-Interim precipitation matches well with the observed precipitation in whole. In different seasons, the annual variation of the ERA-Interim precipitation is well correlated with that of the observed precipitation
Containment between unions of XPath queries
In this paper, we address the containment problem for unions of XPath queries with and without schema. We find the problem can be always reduced into containment problem between one single query and a union of queries. When schema is not available, the problem can be further reduced into checking containment between pairwise queries (each from one union), but this only holds for some XPath subsets, such as XP { /,//,[] } , but not for XP { /,//,[],* } . We then show the problem is still solvable in XP { /,//,[],* } , though no efficient algorithm exists. When schema is at hand, we propose a strategy to rewrite a query into a union of simplified queries based on schema information, and then apply methods developed when schema is not taken into account. The problem is then reduced into checking containment between unions of queries in XP { /,[] } without schema.No Full Tex
Filtering techniques for rewriting XPath queries using views
In this paper, we propose several filtering techniques for rewriting XPath queries using views. The work is motivated by scenarios dealing with large quantities of queries and views, such as semantic query caching and data integration. Considerable rewriting computation could be saved if we manage to efficiently discover that, given a query Q and a view V, there does not exist a rewriting for Q using V. In contrast to O(|Q||V|) (O(|Q||V|2)) time complexity to compute an equivalent rewriting (contained rewriting) for XP {/,//,[] } , we devise linear algorithms running in O(|Q|) to filter queries for both equivalent rewriting and contained rewriting. Our filtering algorithms can be extended to support queries and views in XP {/,//,[],*} , where the equivalent (or contained) rewriting existence problem is still coNP-hard
- …