7 research outputs found
On IVF Approximating Spaces
We introduce the concept of IVF approximating spaces and obtain decision conditions that every IVF topological space is an IVF approximating space
Characteristics of gas-oil contact and mobilization limit during gas-assisted gravity drainage process
Gravity can reduce the instability of the gas-oil contact that is caused by gas channeling in locations with low flow resistance, such as high-permeability layers, macropores, and fractures during the gas-assisted gravity drainage process. Herein, the microscopic forces during the gas-assisted gravity drainage process were analyzed and combined with the capillary model to study the occurrence boundary of gas-assisted gravity drainage process, and the characteristics of the gas-oil contact in the gas-assisted gravity drainage process was discussed. The results show that free gravity drainage occurs only in pores where a certain height of the oil column and pore radius are reached. Furthermore, the lower the oil-gas interface migration rate, the easier free gravity drainage occurs. In other scenarios, additional gas injection is required. During the gas-assisted gravity drainage process, the gas-oil contact moves down stably as a transition. The width of the transition zone and the available pore radius are related to the gas-oil contact migration rate and the oil viscosity; the smaller the gas-oil contact migration rate and the lower the oil viscosity, the smaller pore throat can be involved in mobilization. Optimizing the gas injection rate and reducing the oil viscosity can delay the gas channeling maturity time, which is beneficial for the realization of the gas-assisted gravity drainage process. Finally, a method considering micropore heterogeneity is established for determining the critical gas injection rate, while the mainstream pore throat can be involved in mobilization and the gas-oil contact can be stabilized at the same time. The method of determining the critical gas injection rate can help researchers and reservoir engineers to better understand and implement the gas-assisted gravity drainage process.Cited as: Kong, D., Gao, J., Lian, P., Zheng, R, Zhu, W., Xu, Y. Characteristics of gas-oil contact and mobilization limit during gas-assisted gravity drainage process. Advances in Geo-Energy Research, 2022, 6(2): 169-176. https://doi.org/10.46690/ager.2022.02.0
Rate Transient Analysis for Multi-Fractured Wells in Tight Gas Reservoirs Considering Multiple Nonlinear Flow Mechanisms
Making rate transient analysis (RTA) and formation evaluation for multi-fractured tight gas wells has always been a difficult problem. This is because the fluid flow in the formation has multiple nonlinear flow mechanisms, including gas-water two-phase flow, gas slippage, low-velocity non-Darcy flow, and stress-dependent permeability. In this paper, a novel RTA method is proposed for multi-fractured wells in tight gas reservoirs incorporating nonlinear flow mechanisms. The RTA method is based on an analytical model, which is modified from the classical trilinear flow model by considering all the nonlinear flow mechanisms. The concept of material balance time and normalized rate is used to process the production data for both water and gas phases. The techniques of approximate solutions in linear/bilinear flow regimes and type curve fitting are combined in the proposed RTA method. After that, the rate transient behaviors and influencing factors of multi-fractured tight gas wells are analyzed. A field case from Northwestern China is used to test the efficiency and practicability of the proposed RTA method. The results show that six flow regimes for both gas and water production performances are exhibited on the log-log plots of normalized production rate against material balance time. The rate transient responses are sensitive to the nonlinear flow mechanisms, and formation and fracture properties. The medium flow regimes are significantly affected by fracture number, fracture conductivity, fracture half-length, stress-dependent permeability, gas-water two-phase flow, and formation permeability, which should be considered in making RTA of fractured tight gas wells. The field case shows that both gas and water production performances can be well-fitted using the proposed RTA method. The major innovation of this paper is that a novel RTA method is proposed for fractured tight gas wells considering multiple nonlinear flow mechanisms, and it can be used to make reasonable formation and fracturing evaluations in the field
Calculation Model of Relative Permeability in Tight Sandstone Gas Reservoir with Stress Sensitivity
During the development of tight gas reservoir, the irreducible water saturation, rock permeability, and relative permeability change with formation pressure, which has a significant impact on well production. Based on capillary bundle model and fractal theory, the irreducible water saturation model, permeability model, and relative permeability model are constructed considering the influence of water film and stress sensitivity at the same time. The accuracy of this model is verified by results of nuclear magnetic experiment and comparison with previous models. The effects of some factors on irreducible water saturation, permeability, and relative permeability curves are discussed. The results show that the stress sensitivity will obviously reduce the formation permeability and increase the irreducible water saturation, and the existence of water film will reduce the permeability of gas phase. The increase of elastic modulus weakens the stress sensitivity of reservoir. The irreducible water saturation increases, and the relative permeability curve changes little with the increase of effective stress. When the minimum pore radius is constant, the ratio of maximum pore radius to minimum pore radius increases, the permeability increases, the irreducible water saturation decreases obviously, and the two-phase flow interval of relative permeability curve increases. When the displacement pressure increases, the irreducible water saturation decreases, and the interval of two-phase flow increases. These models can calculate the irreducible water saturation, permeability and relative permeability curves under any pressure in the development of tight gas reservoir. The findings of this study can help for better understanding of the productivity evaluation and performance prediction of tight sandstone gas reservoirs
Potential evaluation on CO2-EGR in tight and low-permeability reservoirs
CO2-EGR, i.e. enhanced gas recovery by injecting CO2, is to displace natural gas by injecting CO2 in the supercritical phase. It can both enhance the recovery of gas reservoirs and realize CO2 storage. Currently, this technique is still at its exploring stage. The effect of CO2-EGR is not clarified, the geologic conditions for CO2-EGR are not definite, and the rational working system for CO2-EGR is not available. In this paper, the long-core experiment was conducted to determine whether and how much the recovery of low-permeability reservoirs can be enhanced by injecting CO2. According to the experimental results, the recovery can be enhanced by 12% when CO2 content in produced gas is more than 10%. Moreover, the multi-component seepage mathematical model was built for displacing natural gas by injecting supercritical CO2, and the model accuracy was verified using laboratory data. With this mathematical model, the influence factors for displacing natural gas by injecting supercritical CO2 were analyzed in order to define the conditions for selecting favorable zones. The Well DK13 area in the Daniudi gas field, Ordos Basin, was selected for potential evaluation of CO2-EGR. As indicated by the numerical simulation results, when CO2 content of producing wells in the Well DK13 area is 10% (with a lower cost for corrosion prevention), the ratio of CO2-EGR is 8.0–9.5%, and 31.1% HCPV(hydrocarbon pores volume) of CO2 storage can be realized. It is thus concluded that the CO2-EGR technique can enhance the recovery of gas reservoirs and also store CO2 underground, contributing to the increase of both social and economic benefits
Multi-parameter quantitative assessment of 3D geological models for complex fault-block oil reservoirs
In the field of 3D geologic modeling, researchers often pay more attention to modeling methods and workflows, but neglect the quantitative evaluation of models. If the evaluation is narrowed to the same reservoir type, the comparability and practicality of quantitative assessment will be emerging. The evaluation system should include three parts: data verification, geological understanding and process check. Data verification mainly involves testing the accuracy of local prediction with actual data, and geological understanding is to examine whether the global estimation honors geological principles and prior insights. Process check is also indispensable to avoid occasionality. To this end, we produced a set of assessment criteria, taking complex fault-block sandstone oil reservoir as an example. To be specific, thirteen characteristic parameters were totally selected, setting weights according to their rated importance, formulating three-level evaluation standards in a centesimal system for each characteristic parameter, and obtaining the final assessment based on the cumulative score. The results indicate that such evaluation can not only access the quality of the model objectively and comprehensively, but also identify the aspects in need of improvement through the deduction items. Key words: reservoir characterization, geological modeling, quality evaluation, characteristic parameter, reserves estimation, fault-block oil reservoi