28 research outputs found
Effects of Brain-Derived Neurotrophic Factor on Local Inflammation in Experimental Stroke of Rat
This study was aimed to investigate whether brain-derived neurotrophic factor (BDNF) can modulate local cerebral inflammation in ischemic stroke. Rats were subjected to ischemia by occluding the right middle cerebral artery (MCAO) for 2 hours. Rats were randomized as control, BDNF, and antibody groups. The local inflammation was evaluated on cellular, cytokine, and transcription factor levels with immunofluorescence, enzyme-linked immunosorbent assay, real-time qPCR, and electrophoretic mobility shift assay, respectively. Exogenous BDNF significantly improved motor-sensory, sensorimotor function, and vestibulomotor function, while BDNF did not decrease the infarct volume. Exogenous BDNF increased the number of both activated and phagocytotic microglia in brain. BDNF upregulated interleukin10 and its mRNA expression, while downregulated tumor necrosis factor α and its mRNA expression. BDNF also increased DNA-binding activity of nuclear factor-kappa B. BDNF antibody, which blocked the activity of endogenous BDNF, showed the opposite effect of exogenous BDNF. Our data indicated that BDNF may modulate local inflammation in ischemic brain tissues on the cellular, cytokine, and transcription factor levels
Experimental study on the shear stiffness and damping ratio of the coarse-grained soil against geogrid interface
Geosynthetic-reinforced soil structures are mostly used to retain subgrade slope of highway and railway. For the design and performance analyses of geosynthetic-reinforced soil structures under repeated loading, such as those induced by compaction, traffic and earthquakes, the understanding of cyclic soil–geosynthetic interface behaviour is of great interest. Nevertheless, experimental data concerning this type of behaviour are very scarce. A laboratory study was carried out and is described in this paper. This paper presents the behaviour of an interface between a coarse-grained soil and a geogrid under cyclic loading conditions. A large-scale direct shear test device able to perform displacement-controlled cyclic tests was used. The results obtained are presented and discussed, especially the effects of the displacement amplitude and normal stress on the shear stiffness and damping ratio are investigated. The dynamic response parameters of the soil-geosynthetic interface are greatly affected by the number of cycles, and the variations in the two parameters with the number of cycles are related to the normal stress and the shear displacement amplitude. when at large displacements, the damping ratio decreases first and then stabilizes with the number of cycles. However, at small displacement, the shear stiffness and damping ratio are all decrease somewhat at the initial stage of cyclic shearing. As the experimental materials used in this study are relatively single, and further experimental research should be carried out in the future. The shear parameters of interface in this study can provide reference for the design of reinforced soil structure
Postmenopausal hormone therapy and Alzheimer's disease, dementia, and Parkinson's disease:A systematic review and time-response meta-analysis
A Simple Integrated Geometrical Error Model for Laser Tracer
Geometrical errors of 2D gimbal mount axes are studied for laser tracer for the sake of realizing rapid detection for numerical control equipment. The high precision reference sphere, which serves as the reflection unit and is set on the base, avoids the influence on measurement accuracy caused by the movements of rotatory axes, and ensures that laser tracer owns large tracing angle. The nonlinear coupling relationship between the geometrical errors and the measurement accuracy of laser tracer is analyzed; the integrated geometrical error model of 2D gimbal mount axes and laser interferometry system is established; the error map of the measuring system is brought. The simulation results demonstrate that the measurement error of the laser tracer is certain and unique after the value and direction of all the geometrical errors determined
A Simple Integrated Geometrical Error Model for Laser Tracer
Geometrical errors of 2D gimbal mount axes are studied for laser tracer for the sake of realizing rapid detection for numerical control equipment. The high precision reference sphere, which serves as the reflection unit and is set on the base, avoids the influence on measurement accuracy caused by the movements of rotatory axes, and ensures that laser tracer owns large tracing angle. The nonlinear coupling relationship between the geometrical errors and the measurement accuracy of laser tracer is analyzed; the integrated geometrical error model of 2D gimbal mount axes and laser interferometry system is established; the error map of the measuring system is brought. The simulation results demonstrate that the measurement error of the laser tracer is certain and unique after the value and direction of all the geometrical errors determined
Optimization Method for Solution Model of Laser Tracker Multilateration Measurement
Multilateration measurement using laser trackers suffers from a cumbersome solution method for high-precision measurements. Errors are induced by the self-calibration routines of the laser tracker software. This paper describes an optimization solution model for laser tracker multilateration measurement, which effectively inhibits the negative effect of this self-calibration, and further, analyzes the accuracy of the singular value decomposition for the described solution model. Experimental verification for the solution model based on laser tracker and coordinate measuring machine (CMM) was performed. The experiment results show that the described optimization model for laser tracker multilateration measurement has good accuracy control, and has potentially broad application in the field of laser tracker spatial localization
Research on Measurement Accuracy of Laser Tracking System Based on Spherical Mirror with Rotation Errors of Gimbal Mount Axes
This paper presents a novel experimental approach for confirming that spherical mirror of a laser tracking system can reduce the influences of rotation errors of gimbal mount axes on the measurement accuracy. By simplifying the optical system model of laser tracking system based on spherical mirror, we can easily extract the laser ranging measurement error caused by rotation errors of gimbal mount axes with the positions of spherical mirror, biconvex lens, cat’s eye reflector, and measuring beam. The motions of polarization beam splitter and biconvex lens along the optical axis and vertical direction of optical axis are driven by error motions of gimbal mount axes. In order to simplify the experimental process, the motion of biconvex lens is substituted by the motion of spherical mirror according to the principle of relative motion. The laser ranging measurement error caused by the rotation errors of gimbal mount axes could be recorded in the readings of laser interferometer. The experimental results showed that the laser ranging measurement error caused by rotation errors was less than 0.1 μm if radial error motion and axial error motion were within ±10 μm. The experimental method simplified the experimental procedure and the spherical mirror could reduce the influences of rotation errors of gimbal mount axes on the measurement accuracy of the laser tracking system
Frequency-Shifted Optical Feedback Measurement Technologies Using a Solid-State Microchip Laser
Since its first application toward displacement measurements in the early-1960s, laser feedback interferometry has become a fast-developing precision measurement modality with many kinds of lasers. By employing the frequency-shifted optical feedback, microchip laser feedback interferometry has been widely researched due to its advantages of high sensitivity, simple structure, and easy alignment. More recently, the laser confocal feedback tomography has been proposed, which combines the high sensitivity of laser frequency-shifted feedback effect and the axial positioning ability of confocal microscopy. In this paper, the principles of a laser frequency-shifted optical feedback interferometer and laser confocal feedback tomography are briefly introduced. Then we describe their applications in various kinds of metrology regarding displacement measurement, vibration measurement, physical quantities measurement, imaging, profilometry, microstructure measurement, and so on. Finally, the existing challenges and promising future directions are discussed
The correlation between novel peripheral blood cell ratios and 90-day mortality in patients with acute ischemic stroke.
BackgroundWe aimed to investigate the correlation between the neutrophil-to-lymphocyte ratio (NLR), platelet-to-lymphocyte ratio (PLR), platelet-to-neutrophil ratio (PNR), platelet-to-white blood cell ratio (PWR) and 90-day mortality in patients with acute ischemic stroke (AIS).MethodsWe retrospectively included 633 patients with AIS from January 2017 to May 2018. The correlation between each indicator and the degree of neurologic deficit was assessed. Kaplan-Meier survival curves based on blood cell ratios were used to analyze the 90-day survival rate of patients with AIS.ResultsA total of 663 patients with AIS were enrolled, of which 24 (3.6%) experienced recurrence and 13 (2.0%) died. NLR>3.23 (odds ratio; OR = 2.236; 95% confidence interval [CI], 1.472-3.397; P3.23, PWRConclusionPNR, PWR, and NLR were associated with the 90-day mortality of patients with AIS. Patients with high NLRs or low PWRs and PNRs may have a greater risk of mortality than other patients. These clinical indicators may help clinicians judge unfavorable prognosis early and implement the appropriate interventions
Ultra-sensitive and wide-dynamic-range sensors based on dense arrays of carbon nanotube tips
Electrochemical electrodes based on dense and vertically aligned arrays of multi-walled carbon
nanotubes (MWCNTs) were produced. The open tips of individual hollow nanotubes are exposed as
active sites while the entangled nanotube stems encapsulated in epoxy collectively provide multiplexed
and highly conductive pathways for charge transport. This unique structure together with the
extraordinary electrical and electrochemical properties of MWCNTs offers a high signal-to-noise ratio
(thus high sensitivity) and a large detection range, compared with other carbon-based electrodes. Our
electrodes can detect K3FeCN6 and dopamine at concentrations as low as 5 nM and 10 nM,
respectively, and are responsive in a large dynamic range that spans almost 5 orders of magnitude.Accepted versio