An Analysis of the Construction and Development of ‘Starry Star’ Training Camp in Zhengzhou City

Since 2017, the Ministry of Education has taken the lead in establishing the \u27Starry Star\u27 pilot training camp. As a leading city of school football campaign/activity, Zhengzhou City takes up heavy responsibility of continuously promoting the rapid development of school football in Henan Province. This paper adopts such methodologies such as literature, fieldwork, mathematical statistics and logical analysis to identify the weaknesses in the current phase of construction and to make reasonable recommendations according to policies and the actual situation for pointing out the direction for the future development. In terms of organizational leadership, all relevant policies and documents are well-developed reflecting the high degree of importance attached to each training camp, but very few of them have omissions in the development of the system of admissions and training management regulations. In terms of condition guarantee, three aspects are prominent, including the treatment of coaches (calculation of hours), the size of the training grounds at each training site not meeting the requirements of the camps\u27 participation groups (due to limited size of the campus), and the lack of implementation of supporting funds (in the surrounding counties). In terms of competition and training, all schools lost points to varying degrees in the various detailed assessment indicators of the survey and assessment such as inappropriate teaching attitude of the teaching staff, unsystematic training syllabus, unfinished work arrangements for two tournaments and one practice and insufficient attention to the campers\u27 performance in cultural subjects. In terms of reserve training and training participation rate, nearly 30% of the camps failed to send outstanding athletes to higher level schools; half of the camps failed to ensure over 90% attendance of campers. It is suggested that relevant authorities should in future give standardized and clear policies regarding admissions and other related systems. Further, the authorities should clarify the way of coaches\u27 salary and title appraisal, focus on the implementation of matching funds for training camps, and gradually adjust the correspondence between matching camper groups and camp site conditions. As the main task of the Starry Star training camps, more attention should be placed in future work, improving policies, seriously correcting and dealing with various situations that affect the quality of race training in each camp. The authorities should optimize the way of supplying outstanding athletes, and at the same time strengthen regular inspections and random checks for the attendance, putting equal emphasis on training quality and participation

Case report: An ectopic adrenocortical adenoma in the renal sinus

BackgroundEctopic adrenal tissue is rare in adults, with an incidence of only about 1%. We report a rare case of ectopic adrenocortical adenoma in the left renal sinus.Case PreentationA 57-year-old woman was admitted to the Department of Urology due to “a left kidney tumor” on physical examination. Multislice helical computed tomography (CT) showed the left kidney with an anterior lip mass near the hilum, approximately 2.3 cm × 2.2 cm in size. Preoperative renal artery CT angiography (CTA) showed no obvious abnormality. Laparoscopic resection of the left renal sinus mass was performed, and postoperative pathological findings showed ectopic adrenocortical adenoma. The tumor was a nonfunctional adenoma.ConclusionRenal ectopic adrenal cortical adenoma is rare. Most of them are nonfunctional adenomas, which cannot be clearly diagnosed by preoperative imaging examination and can often be diagnosed by postoperative pathology

An efficient headland-turning navigation system for a safflower picking robot

This study proposes a navigation system for the headland autonomous turning of a safflower picking robot. The proposed system includes binocular cameras, differential satellites, and inertial sensors. The method of extracting the headland boundary line combining the hue, saturation, and value-fixed threshold segmentation method and random sample consensus algorithm and planning the headland-turning trajectory of a robot based on the multiorder Bezier curve are used as control methods. In addition, a headland-turning tracking model of a safflower picking robot is designed, and a path-tracking control algorithm is developed. A field test verifies the performance of the designed headland-turning navigation system. The test results show that the accuracy of the judgment result regarding the existence of a headland is higher than 96%. In headland boundary detection, the angle deviation is less than 1.5˚, and the depth value error is less than 50 mm. The headland-turning path tracking test result shows that at a turning speed of 0.5 km/h, the average lateral deviation is 37 mm, and the turning time is 24.2 seconds. Compared to the 1 km/h, the turning speed of 0.5 km/h provides a better trajectory tracking effect, but the turning time is longer. The test results verify that this navigation system can accurately extract the headland boundary line and can successfully realise the headland-turning path tracking of a safflower picking robot. The results presented in this study can provide a useful reference for the autonomous navigation of a field robot

Investigation of Pectenotoxin Profiles in the Yellow Sea (China) Using a Passive Sampling Technique

Pectenotoxins (PTXs) are a group of lipophilic algal toxins. These toxins have been found in algae and shellfish from Japan, New Zealand, Ireland, Norway and Portugal. PTX profiles vary with geographic location of collection site. The aim of the present study was to investigate PTX profiles from the Yellow Sea, China. The sampling location was within an aquatic farm (N36°12.428′, E120°17.826′) near the coast of Qingdao, China, in the Yellow Sea from 28 July to 29 August 2006. PTXs in seawater were determined using a solid phase adsorption toxin tracking (SPATT) method. PTXs were analyzed by HPLC-MSMS. PTX-2, PTX-2 sec acid (PTX-2 SA) and 7-epi-PTX-2 SA were found in seawater samples. The highest levels of PTXs (107 ng/g of resin PTX-2, 50 ng/g of resin PTX-2 SA plus 7-epi-PTX-2 SA) in seawater were found on 1 August, 2006. From 1 August to 29 August, the levels of PTX-2 and PTX-2 SA decreased. In the same area, the marine algae, Dinophysis acuminata was found in the seawater in the summer months of 2006. This indicated that Dinophysis acuumuta might be the original source of PTXs. PTX-11 and PTX-12a/b were not found in seawater

Optimization of Substrate Conformal Imprint Lithography (SCIL) and Etching for Nanostructure

The UV-SCIL fabrication process was developed and optimized to improve the quality of the nanostructures on the hard substrate transferred with substrate conformal imprint lithography (SCIL) technology. In particular, the key steps such as coating imprint resist, exposure time and etching time were investigated thoroughly. The experiment’s results illustrate that imprint resist could well serve as an etching mask for the dry etching process without oxygen plasma. The optimized etching condition and SCIL technology could also be used to transfer nanostructures on different substrates for metal nanostructured biosensors or nanophotonics

Fe₂O₃/MgFe₂O₄ Nanosheet on Nickel Foam for High-Performance Asymmetric Supercapacitors

In this paper, the effects of nickel foam with different thicknesses, as a fluid collector, on the morphology and properties of electrode materials were explored. The Fe2O3 material, which is a common active material for supercapacitor electrodes, was used in combination with MgFe2O4. This combination resulted in better electrochemical performance and cycle stability for the Fe2O3 material. The synthesis ratio of Fe2O3/MgFe2O4 materials with the best stability, as reported in a previous article, was selected for this study. The electrode with the best performance was then selected and assembled with activated carbon to form an asymmetric supercapacitor. This supercapacitor exhibited a high specific capacity of 240 C/g, an energy density of 58.75 Wh/kg, and a power density of 200.4 W/kg at a current density of 1 A/g. These findings provide valuable references for the selection of different fluid collectors with electrodes