A Meta-Analysis on the Effects of STEM Education on Students’ Abilities

Does STEM education improve students' higher-level thinking and cognitive abilities? So far, empirical research has not yielded consistent conclusions. As such, this study applied the method of meta-analysis to synthesize quantitatively existing research to better understand STEM and its effects on students’ abilities associated with learning. The study found that STEM education is conducive to improving students' higher-order thinking and cognitive ability levels with an effect size of (d = 0.798). The results indicate that teaching methods and student experiences in STEM education have a positive effect on student learning

Comparative Study on the Generation and Characteristics of Debris Induced by Fretting and Sliding

Objectives: The aim of the present work was to comparatively investigate the generation and characteristics of fretting and sliding wear debris produced by CuNiAl against 42CrMo4. Methods: Tribological tests were conducted employing a self-developed tribometer. Most experimental conditions were set the same except for the amplitudes and number of cycles. Morphological, chemical, microstructural and dimensional features of the worn area and debris were investigated using optical microscope (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and a laser particle sizer. Outcomes: Not only wear scar profiles but also the wear debris color, distribution and generated amount under fretting and sliding wear modes were quite different, which can be attributed to the significant difference in wear mechanisms. Particle size analysis indicates that the fretting debris has a smaller size distribution range; the biggest detected fretting and sliding wear debris sizes were 141 μm and 355 μm, respectively. Both fretting and sliding debris are mainly composed of copper and its oxides, but the former shows a higher oxidation degree

A feasible method for the fabrication of VAlTiCrSi amorphous high entropy alloy film with outstanding anti-corrosion property

A feasible method for the fabrication of VAlTiCrSi amorphous high entropy alloy film with outstanding anti-corrosion propert

Effects of nitriding on the microstructure and properties of VAlTiCrMo high-entropy alloy coatings by sputtering technique

The VAlTiCrMo and (VAlTiCrMo)N-x coatings were prepared by sputtering V-Al-Ti-Cr-Mo splicing targets. The microstructure and chemical composition were analyzed by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and transmission electron microscope (TEM). The high-entropy alloy coating and the corresponding nitride coating have body-centered cubic (BCC) and face-centered cubic (FCC) structures respectively. Nitriding changes the phase structure and growth mode of the high-entropy coating, and the synthesized high-entropy nitride coatings are more compact. Meanwhile, the introduction of nitrogen leads to severe lattice distortion, which improves the mechanical properties of the high-entropy coating. As the nitriding degree increases, the corrosion resistance of the high-entropy nitride coatings in 3.5 wt% NaCl solution is improved. The synthesized (VAlTiCrMo)Nx coating exhibits optimized mechanical properties and nobler corrosion resistance when the N-2 flow is 800 sccm. (C) 2020 Elsevier B.V. All rights reserved

High-Conductivity, Flexible and Transparent PEDOT:PSS Electrodes for High Performance Semi-Transparent Supercapacitors

Herein, we report a flexible high-conductivity transparent electrode (denoted as S-PH1000), based on conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), and itsapplication to flexible semi-transparentsupercapacitors. A high conductivity of 2673 S/cm was achieved for the S-PH1000 electrode on flexible plastic substrates via a H2SO4 treatment with an optimized concentration of 80 wt.%. This is among the top electrical conductivities of PEDOT:PSS films processed on flexible substrates. As for the electrochemical properties,a high specific capacitance of 161F/g was obtained from the S-PH1000 electrode at a current density of 1 A/g. Excitingly, a specific capacitance of 121 F/g was retained even when the current density increased to 100 A/g, which demonstrates the high-rate property of this electrode. Flexible semi-transparent supercapacitors based on these electrodes demonstrate high transparency, over 60%, at 550 nm. A high power density value, over 19,200 W/kg,and energy density, over 3.40 Wh/kg, was achieved. The semi-transparent flexible supercapacitor was successfully applied topower a light-emitting diode