Anomalous heat induced by deuterium flux in a bunch of long-thin palladium tubes using PID method for calorimetry

PosterThis is a poster that was submitted to the 18th Annual International Conference on Cold Fusion (ICCF)

Fabrication of anti-adhesion surfaces on aluminium substrates of rubber plastic moulds using electrolysis plasma treatment

An anti-adhesion surface with a water contact angle of 167° was fabricated on aluminium samples of rubber plastic moulds by electrolysis plasma treatment using mixed electrolytes of C6H5O7(NH4)3 and Na2SO4, followed by fluorination. To optimise the fabrication conditions, several important processing parameters such as the discharge voltage, discharge time, concentrations of supporting electrolyte and stearic acid ethanol solution were examined systematically. Using scanning electron microscopy (SEM) to analyse surfaces morphology, micrometer scale pits, and protrusions were found on the surface, with numerous nanometer mastoids contained in the protrusions. These binary micro/nano-scale structures, which are similar to the micro-structures of soil-burrowing animals, play a critical role in achieving low adhesion properties. Otherwise, the anti-adhesion behaviours of the resulting samples were analysed by the atomic force microscope (AFM), Fourier-transform infrared spectrophotometer (FTIR), electrons probe micro-analyzer (EPMA), optical contact angle meter, digital Vickers microhardness (Hv) tester, and electronic universal testing. The results show that the electrolysis plasma treatment does not require complex processing parameters, using a simple device, and is an environment-friendly and effective method. Under the optimised conditions, the contact angle (CA) for the modified anti-adhesion surface is up to 167°, the sliding angle (SA) is less than 2°, roughness of the sample surface is only 0.409μm. Moreover, the adhesion force and Hv are 0. 9KN and 385, respectively

Investigation of Adhesive Resistance of Aluminum Alloy by Sandblasting and Electrochemical Machining

A novel method for fabricating an adhesive resistance surface is presented. Sandblasting and electrochemical machining were introduced to prepare micro-nano structures on the sample surface. Then, the prepared sample was immersed in a tridecafluoroctyltriethoxysilane ethanol solvent. The surface of the aluminum alloy sample roughened and covered with low-surface-energy chemical groups was examined by scanning electron microscope (SEM) and atomic force microscope (AFM). Surface wettability and adhesive resistance of the treated sample were characterized by water contact angles, area fraction, sliding angle and solid surface energy. Furthermore, the effects of some process parameters, such as sand size, current density, electrochemical machining time, and electrolyte concentration, on the contact angle, area fraction, sliding angle and the solid surface-energy of the modified sample surfaces were provided. The results show that the combination of binary micro-structures and surface modification of tridecafluoroctyltriethoxysilane plays a role to improve adhesive resistance of the aluminum alloy surface