Possible roles, positions, factors and components of dairying in organic farming – a rewiev, mapping, survey and comparison in the Czech Republic

The full-value experiment is questionable in evaluation organic dairying. It is problem to do a trial under comparable conditions for comparison of organic and conventional farming because of legislative reasons and necessity of long period of such event. Most of comparisons are carried out as practice descriptive observations and any of them has been carried out about milk production. That is main reason, why the aim of this work is to carry out a opening of monitoring of some production conditions and results of bio-dairying in the Czech Republic (CR). The quality aspects of sources, procedures and products are main topics of solution of projects about organic farming philosophy, in particular in solution of organic dairy foodstuff chain. There were choosen twelve organic dairy farms (survey II, 2006) for more detail research of production conditions according to results of exploratory questionnaire (2006, survey I, n = 85 pieces of questionnaire and 58 organic farms, which practicise dairying) in the CR. The climatology characteristics of selected organic dairy farms were as follows: (I) 562±149 m above sea level on the average (from 270 to 970 m a. s. l.); (II) 571.0±69.9 m above sea level, mean year temperature 6.0±1.1 ºC and average year rainfall sum 843.0±184.3 mm. It is clear according to previously mentioned figures that the organic (ecology) dairy farming is realized mostly in the mountain or sub-mountain areas (less favourable areas, LFAs) as compared to climatic conditions of CR mean profile. The results of investigation of organic farm (E) and breeder conditions and dairy cow health state, reproduction performance and milk quality in organic farms (I data file) as compared to conventional dairy cow herds (K) were: milk yield (E) was 14.2±3.4 kg of milk/cow/day on average and 5165±1112 kg/cow/year; E farms have 50 % free stables, some of them as different untraditional modifications (mostly in herds with low number of dairy cows); it is necessary to increase this amount for welfare improvement in the future; there are 52 % of binding stables in K herds; there (E) is high occurrence frequency of can milking equipments (46.4 %); there are 5.4 % cases of hand milking, 21.4 % of pipeline milking equipments and 26.8 % of milking parlours; there (K) are 3 % of can milking equipments, 50 % of pipeline milking equipments and 47 % of milking parlours; the average organic herd has 60±91 heads it means about 1/3 of K herd in the CR; geometrical average (xg) of organic herd size is 17 heads; daily milk deliveries were 1318±1475 kg in summer and 976±1368 kg in winter season (there is too high variability in the mentioned indicators); breed structure of E herds is 59.8 % of Bohemian Spotted cattle, 18.8 % of Holstein (H), 12.5 % of Jersey breed; H breed is dominating 47.5 % in K herds; average ratio of excluded milk (for secretion disorders or treatment) is 2.99 % in E herds and 4.6 % in K herds (P<0.01); also there (E) is lower occurrence of clinical mastitis 0.53±1.97 %; service period is 124.3 days in K and 98.7±46,1 days in E herds on average (P<0.01); there (E) is better insemination index 1.66±0.45 in comparison to K herds 2.07 (P<0.01); there is longer longevity as duration of production life of dairy cows in E herds (6.02 lactations, „about 141 % better”) in comparison to K herds (2.50 lactations, P<0.01); milk quality showed the average total mesophilic bacteria count (CPM) 36.0±26.8 ths. CFU/ml in organic farms (E), which is comparable to the conventional farms (K); somatic cell count (PSB) was 192±87 ths./ml in E herds and 256 ths./ml in K herds, which is in connection with the lower ratio of milk exclusion from delivery in E herds; an occurrence of residues of inhibitory substances (RIL) was not reported in E herds, which is more advantageous in comparison to the K herds (0.16 %) and it could be an impact of lowered antibiotica drug use; the average fat and lactose contents (T; 4.05±0.19 %) and (L; 4.83±0.15 %) are well comparable with K farms and the results show on higher energy deficiency in E herd nutrition. The water quality (II) is necessary in dairying as well. Drinking water is necessary for health of animals (their watering) and for milk quality (milking equipment sanitation) as well. Drinking water is asked in dairy farms by legislation. The E farm water quality: the nitrate level varied in the range from 1.63 to 28 mg/l with average 10.5 mg/l in ecological farms and standard limit 50 mg/l was not exceeded; the levels of nitrite and ammonia ions were mostly under detection limit of method; legislative limit <0.5 mg/l was not exceeded by nitrite and once by ammonia ions 0.81 mg/l. The microbiological indicators are more sensitive of course. In total the limits were exceeded 7× u in coliform bacteria, 3× in streptococci and Escherichia coli was confirmed 3× (in comparison to demand 0). Therefore it is necessary to take care of incidental water source sanitation. The effect of origin of water source (communal water pipes or own well in the organic farm area) which was used in the organic farming (II) was: the more marked result differences were not observed between own wells (S) and communal water supply (V) in E farms; an exception was stated in insignificantly better results of hygienic indicators of communal supply; therefore it is necessary to put the higher importance on sanitation of own water sources. There were identified eight own wells and four communal supply. E. g. nitrate levels were a little higher for wells 11.7 > 8.2 mg/l. The nitrites were not different. Chemical oxygen consumption was 0.45 and 0.52 mg/l. The more expressive differences were identified in chlorides, sulphates and Mg: 8.33 and 3.02 mg/l; 27.9 and 16.8 mg/l; 18.9 and 3.5 mg/l

Quasiparticle scattering in superconductors

We compare results of high-resolution magnetic flux (susceptibility) measurements in very weak magnetic field, performed of three classes of superconductors. They reveal astonishing details of the transition to the superconducting state. Although Pb behaves also on this scale according to BCS predictions, La is more reminiscent of HTS materials, which exhibit anomalous features. We suggest that known structure peculiarities are due to a strong electron-lattice instability and lead to a resonance electron back scattering

A Novel Approach to the Production of Printed Patch Antennas

This paper presents the manufacturing of a patch antenna using an advanced 3D printing technology called lights-out digital additive manufacturing (LDM). This 3D LDM printing technology is mainly used for printing circuit boards (PCBs); however, it has also been used to print a patch antenna from conductive (CI) and dielectric ink (DI). This 3D LDM-printed antenna was compared with antennas on different dielectric substrates (Arlon 25N and FR4). The obtained results are compared and analyzed in this paper

Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric

Excellent adhesion of electrospun nanofiber (NF) to textile support is crucial for a broad range of their bioapplications, e.g., wound dressing development. We compared the effect of several low- and atmospheric pressure plasma modifications on the adhesion between two parts of composite—polycaprolactone (PCL) nanofibrous mat (functional part) and polypropylene (PP) spunbond fabric (support). The support fabrics were modified before electrospinning by low-pressure plasma oxygen treatment or amine plasma polymer thin film or treated by atmospheric pressure plasma slit jet (PSJ) in argon or argon/nitrogen. The adhesion was evaluated by tensile test and loop test adapted for thin NF mat measurement and the trends obtained by both tests largely agreed. Although all modifications improved the adhesion significantly (at least twice for PSJ treatments), low-pressure oxygen treatment showed to be the most effective as it strengthened adhesion by a factor of six. The adhesion improvement was ascribed to the synergic effect of high treatment homogeneity with the right ratio of surface functional groups and sufficient wettability. The low-pressure modified fabric also stayed long-term hydrophilic (ten months), even though surfaces usually return to a non-wettable state (hydrophobic recovery). In contrast to XPS, highly surface-sensitive water contact angle measurement proved suitable for monitoring subtle surface changes