Evolution of microstructure and crystallographic texture of Ni-Mn-Ga melt-spun ribbons exhibiting 1.15% magnetic field-induced strain

The microstructure and texture evolution of 10M Ni-Mn-Ga melt-spun ribbons were thoroughly evalu- ated by high-energy synchrotron radiation and electron backscatter diffraction. The as-spun ribbons were subjected to annealing treatment in order to tailor microstructure, atomic order degree, and crystallo- graphic texture. The optimum annealing treatment at 1173 K for 72 h produced a homogenous fiber texture and induced grain growth to the size that spans the entire ribbon thickness. This in turn reduced microstructural constraints for twin variant reorientation in the direction perpendicular to the ribbon surface. On the other hand, a homogenous radial microstructure ensured in-plane stress/strain compatibility giving rise to strain accommodation during variant reorientation. Particular attention was also given to the evaluation of atomic order, which to the largest extent controls the characteristic trans- formation temperatures. It also lowered the twinning stress to a level sufficiently low for martensitic variant reorientation under magnetic field. As a result, 1.15% magnetic field-induced strain without the aid of mechanical training in the self-accommodated state was achieved

Effect of Co Substitution and Thermo-Magnetic Treatment on the Structure and Induced Magnetic Anisotropy of Fe84.5−xCoxNb5B8.5P2 Nanocrystalline Alloys

In the present work, we investigated in detail the thermal/crystallization behavior and magnetic properties of materials with Fe84.5-xCoxNb5B8.5P2 (x = 0, 5, 10, 15 and 20 at.%) composition. The amorphous ribbons were manufactured on a semi-industrial scale by the melt-spinning technique. The subsequent nanocrystallization processes were carried out under different conditions (with/without magnetic field). The comprehensive studies have been carried out using differential scanning calorimetry, X-ray diffractometry, transmission electron microscopy, hysteresis loop analyses, vibrating sample magnetometry and Mössbauer spectroscopy. Moreover, the frequency (up to 300 kHz) dependence of power losses and permeability at a magnetic induction up to 0.9 T was investigated. On the basis of some of the results obtained, we calculated the values of the activation energies and the induced magnetic anisotropies. The X-ray diffraction results confirm the surface crystallization effect previously observed for phosphorous-containing alloys. The in situ microscopic observations of crystallization describe this process in detail in accordance with the calorimetry results. Furthermore, the effect of Co content on the phase composition and the influence of annealing in an external magnetic field on magnetic properties, including the orientation of the magnetic spins, have been studied using various magnetic techniques. Finally, nanocrystalline Fe64.5Co20Nb5B8.5P2 cores were prepared after transverse thermo-magnetic heat treatment and installed in industrially available portable heating equipment

Suppression and Recovery of Martensitic Transformation and Magnetism in Mechanically and Thermally Treated Magnetic Shape‐Memory Ni−Mn−Ga Melt‐Spun Ribbons

As-melt-spun Ni$_{50.2}$Mn$_{28.3}$Ga$_{21.5}$ ribbons are subjected to milling and subsequentannealing for various times. With progressing milling time, the martensitictransformation is gradually suppressed, magnetic moment deteriorates, whereasthe crystal structure undergoes a body centered tetragonal (bct) into face centeredcubic (fcc) change. High-resolution transmission electron microscopy demonstratesa twin-deformed zone in fcc powder particles, which works to improvecircularity of as-produced powders. Subsequent annealing of as-milled powdersrestores martensitic transformation and magnetism, as well as it reverts the fccinto the original 5M structure. It is hence showcased that due to an allotropictransformation, brittle Heusler alloys are mechanically optimized for 3D printingwithout loss of their functional properties

Fe-Co-B Soft Magnetic Ribbons: Crystallization Process, Microstructure and Coercivity

In this work, a detailed microstructural investigation of as-melt-spun and heat-treated Fe67Co20B13 ribbons was performed. The as-melt-spun ribbon was predominantly amorphous at room temperature. Subsequent heating demonstrated an amorphous to crystalline α-(Fe,Co) phase transition at 403 °C. In situ transmission electron microscopy observations, carried out at the temperature range of 25–500 °C and with the heating rate of 200 °C/min, showed that the first crystallized nuclei appeared at a temperature close to 370 °C. With a further increase of temperature, the volume of α-(Fe,Co) crystallites considerably increased. Moreover, the results showed that a heating rate of 200 °C/min provides for a fine and homogenous microstructure with the α-(Fe,Co) crystallites size three times smaller than when the ribbon is heated at 20 °C/min. The next step of this research concerned the influence of both the annealing time and temperature on the microstructure and coercivity of the ribbons. It was shown that annealing at 485 °C for a shorter time (2 s) led to materials with homogenous distribution of α-(Fe,Co) crystallites with a mean size of 30 nm dispersed in the residual amorphous matrix. This was reflected in the coercivity (20.5 A/m), which significantly depended on the volume fraction of crystallites, their size, and distribution

Influence of Cu Content on Structure and Magnetic Properties in Fe86-xCuxB14 Alloys

Influence of Cu content on thermodynamic parameters (configurational entropy, Gibbs free energy of mixing, Gibbs free energy of amorphous phase formation), crystallization kinetics, structure and magnetic properties of Fe86-xCuxB14 (x = 0, 0.4, 0.55, 0.7, 1) alloys is investigated. The chemical composition has been optimized using a thermodynamic approach to obtain a minimum of Gibbs free energy of amorphous phase formation (minimum at 0.55 at.% of Cu). By using differential scanning calorimetry method the crystallization kinetics of amorphous melt-spun ribbons was analyzed. It was found that the average activation energy of α-Fe phase crystallization is in the range from 201.8 to 228.74 kJ/mol for studied samples. In order to obtain the lowest power core loss values, the isothermal annealing process was optimized in the temperature range from 260 °C to 400 °C. Materials annealed at optimal temperature had power core losses at 1 T/50 Hz—0.13–0.25 W/kg, magnetic saturation—1.47–1.6 T and coercivity—9.71–13.1 A/m. These samples were characterized by the amorphous structure with small amount of α-Fe nanocrystallites. The studies of complex permeability allowed to determine a minimum of both permeability values at 0.55 at.% of Cu. At the end of this work a correlation between thermodynamic parameters and kinetics, structure and magnetic properties were described