MALDI-TOF MS for the identification of cultivable organic-degrading bacteria in contaminated groundwater near unconventional natural gas extraction sites

Groundwater quality and quantity is of extreme importance as it is a source of drinking water in the United States. One major concern has emerged due to the possible contamination of groundwater from unconventional oil and natural gas extraction activities. Recent studies have been performed to understand if these activities are causing groundwater contamination, particularly with respect to exogenous hydrocarbons and volatile organic compounds. The impact of contaminants on microbial ecology is an area to be explored as alternatives for water treatment are necessary. In this work, we identified cultivable organic-degrading bacteria in groundwater in close proximity to unconventional natural gas extraction. Pseudomonas stutzeri and Acinetobacter haemolyticus were identified using matrix-assisted laser desorption/ionization-time-of-flight-mass spectrometry (MALDI-TOF MS), which proved to be a simple, fast, and reliable method. Additionally, the potential use of the identified bacteria in water and/or wastewater bioremediation was studied by determining the ability of these microorganisms to degrade toluene and chloroform. In fact, these bacteria can be potentially applied for in situ bioremediation of contaminated water and wastewater treatment, as they were able to degrade both compounds.info:eu-repo/semantics/publishedVersio

TOC/Conductivity: Surrogate Measurements Potentially Guiding Greater Utilization of Treated Produced Water

Hydraulic fracturing utilizes pressurized liquid typically consisting of water, proppants, and a multitude of chemical additives, in order to fracture petroliferous strata to extract natural gas and oil. In this process, a vast amount of wastewater is produced. This water is heavily contaminated, which renders it unusable outside of direct reuse, without extensive treatment being performed. Typically, various sophisticated analytical techniques are involved in the characterization of both waste and treated waters, increasing the cost and the complexity of the management efforts. The article discusses the constituents found in oilfield wastewater, the methods used to identify and quantify these constituents, and the present management methods. Additionally, we introduce total organic carbon and conductivity analyses as surrogate measurements of overall water quality. Total organic carbon and conductivity are established bulk measurements, which can be used to facilitate rapid decisions regarding the treatment and greater utilization of flowback and produced oilfield wastes. The application of the proposed surrogates could be used to streamline the current myriad of complex and expensive measurements. This would improve operational efficiency with respect to wastewater management in the energy sector

Produced Water Treatment and Valorization: A Techno-Economical Review

In recent years, environmental concerns have urged companies in the energy sector to modify their industrial activities to facilitate greater environmental stewardship. For example, the practice of unconventional oil and gas extraction has drawn the ire of regulators and various environmental groups due to its reliance on millions of barrels of fresh water—which is generally drawn from natural sources and public water supplies—for hydraulic fracturing well stimulation. Additionally, this process generates two substantial waste streams, which are collectively characterized as flowback and produced water. Whereas flowback water is comprised of various chemical additives that are used during hydraulic fracturing; produced water is a complex mixture of microbiota, inorganic and organic constituents derived from the petroliferous strata. This review will discuss the obstacles of managing and treating flowback and produced waters, concentrating on the hardest constituents to remove by current technologies and their effect on the environment if left untreated. Additionally, this work will address the opportunities associated with repurposing produced water for various applications as an alternative to subsurface injection, which has a number of environmental concerns. This review also uses lithium to evaluate the feasibility of extracting valuable metals from produced water using commercially available technologies

Pretreatment Techniques for Produced Water with Subsequent Forward Osmosis Remediation

Unconventional oil and gas extraction is on the rise across the United States and comprises an integral component in meeting the nation’s energy needs. The primary by-product of this industrious process is produced water, which is a challenging matrix to remediate because of its complex physical and chemical composition. Forward osmosis is a viable option to treat high-salinity produced water; however, fouling has been an issue. This study aimed to treat produced water before using forward osmosis as a remediation option. Trials consisted of a series of five experiments in order to evaluate the performance of the membrane. Samples were treated by centrifugation, activated carbon, filtration, ferric chloride, as well as coagulants and a polymer. It can be concluded that forward osmosis can be used to extract water from high-salinity oil field brines and produced water, and that pretreating the produced water decreased the tendency for fouling. The pretreatment with the overall best performance was activated carbon, which also yielded the lowest total organic carbon concentrations of 1.9 mg/L. During remediation trials using produced water pretreated with activated carbon as the feed solution, there was a 14% decrease in flux over the course of the 7 h trials. The membrane performance was restored after washing

Characterizing Various Produced Waters from Shale Energy Extraction within the Context of Reuse

Environmental concerns with unconventional oil and gas development are frequently centered on elevated water usage and the induction of seismic events during waste disposal. Reuse of produced water for subsequent production well stimulation can effectively address these concerns, but the variability among such samples must be well understood. Twenty-four samples of wastewater from unconventional oil and gas development were collected from south and west Texas to assess their variability and feasibility for direct reuse. Bulk metrics were collected, including total organic carbon, total nitrogen, as well as total dissolved and suspended solids. The profiles of pertinent inorganic constituents were also evaluated. Variations were not only seen between regions but also among samples collected from the same region. For example, the average total organic carbon for Eagle Ford samples collected was 700 ± 500 mg/L, while samples collected from the Permian Basin featured an average total organic carbon concentration of 600 ± 900 mg/L. The Permian Basin total organic carbon ranged from 38 to 2600 mg/L. The total dissolved solids levels had the same variability between regions, with an average value for Eagle Ford of 20,000 ± 10,000 mg/L and a Permian Basin value of 150,000 ± 40,000 mg/L. However, samples were more reproducible within a given region. Collectively, the data indicate that the direct reuse of raw produced water for subsequent production well development without treatment is not feasible based on the reported reuse thresholds. Unconventional development wastewater samples from the Permian Basin were also compared to produced water values from conventional oil and gas wells in the same region, as reported by the United States Geological Survey. Samples collected in the Permian Basin consistently demonstrated lower ionic strength compared to conventional produced water data

Characterizing Various Produced Waters from Shale Energy Extraction within the Context of Reuse

Environmental concerns with unconventional oil and gas development are frequently centered on elevated water usage and the induction of seismic events during waste disposal. Reuse of produced water for subsequent production well stimulation can effectively address these concerns, but the variability among such samples must be well understood. Twenty-four samples of wastewater from unconventional oil and gas development were collected from south and west Texas to assess their variability and feasibility for direct reuse. Bulk metrics were collected, including total organic carbon, total nitrogen, as well as total dissolved and suspended solids. The profiles of pertinent inorganic constituents were also evaluated. Variations were not only seen between regions but also among samples collected from the same region. For example, the average total organic carbon for Eagle Ford samples collected was 700 ± 500 mg/L, while samples collected from the Permian Basin featured an average total organic carbon concentration of 600 ± 900 mg/L. The Permian Basin total organic carbon ranged from 38 to 2600 mg/L. The total dissolved solids levels had the same variability between regions, with an average value for Eagle Ford of 20,000 ± 10,000 mg/L and a Permian Basin value of 150,000 ± 40,000 mg/L. However, samples were more reproducible within a given region. Collectively, the data indicate that the direct reuse of raw produced water for subsequent production well development without treatment is not feasible based on the reported reuse thresholds. Unconventional development wastewater samples from the Permian Basin were also compared to produced water values from conventional oil and gas wells in the same region, as reported by the United States Geological Survey. Samples collected in the Permian Basin consistently demonstrated lower ionic strength compared to conventional produced water data

TOC/Conductivity: Surrogate Measurements Potentially Guiding Greater Utilization of Treated Produced Water

Hydraulic fracturing utilizes pressurized liquid typically consisting of water, proppants, and a multitude of chemical additives, in order to fracture petroliferous strata to extract natural gas and oil. In this process, a vast amount of wastewater is produced. This water is heavily contaminated, which renders it unusable outside of direct reuse, without extensive treatment being performed. Typically, various sophisticated analytical techniques are involved in the characterization of both waste and treated waters, increasing the cost and the complexity of the management efforts. The article discusses the constituents found in oilfield wastewater, the methods used to identify and quantify these constituents, and the present management methods. Additionally, we introduce total organic carbon and conductivity analyses as surrogate measurements of overall water quality. Total organic carbon and conductivity are established bulk measurements, which can be used to facilitate rapid decisions regarding the treatment and greater utilization of flowback and produced oilfield wastes. The application of the proposed surrogates could be used to streamline the current myriad of complex and expensive measurements. This would improve operational efficiency with respect to wastewater management in the energy sector