Three-dimensional micromachining for microsystems by confined etchant layer technique

The micromachining of GaAs with three different truly three-dimensional (3D) molds were performed by the confined etchant layer technique (CELT). The etched patterns were found, approximately, to be the negative copy of the 3D molds. The general comparison of CELT with the existing micromachining techniques, such as two-dimensional (2D) projection lithography and electro-discharge machining, was made. The replication of the complex microstructures down to micrometer scale has been done by CELT in a single step. The photoresist layer, together with the procedures of exposure, developing and removal of resist, could be eliminated. The advantages of CELT over the existing lithography techniques and its potential applications are discussed briefly. It has been shown that CELT could be developed as a complementary technique to the existing micromachining techniques in fabricating microdevices for microsystems. (C) 2001 Elsevier Science Ltd. All rights reserved

Lysine-Rich Extracellular Rings Formed by hβ2 Subunits Confer the Outward Rectification of BK Channels

The auxiliary β subunits of large-conductance Ca2+-activated K+ (BK) channels greatly contribute to the diversity of BK (mSlo1 α) channels, which is fundamental to the adequate function in many tissues. Here we describe a functional element of the extracellular segment of hβ2 auxiliary subunits that acts as the positively charged rings to modify the BK channel conductance. Four consecutive lysines of the hβ2 extracellular loop, which reside sufficiently close to the extracellular entryway of the pore, constitute three positively charged rings. These rings can decrease the extracellular K+ concentration and prevent the Charybdotoxin (ChTX) from approaching the extracellular entrance of channels through electrostatic mechanism, leading to the reduction of K+ inflow or the outward rectification of BK channels. Our results demonstrate that the lysine rings formed by the hβ2 auxiliary subunits influences the inward current of BK channels, providing a mechanism by which current can be rapidly diminished during cellular repolarization. Furthermore, this study will be helpful to understand the functional diversity of BK channels contributed by different auxiliary β subunits

Genome-wide copy number variation study in anorectal malformations

Anorectal malformations (ARMs, congenital obstruction of the anal opening) are among the most common birth defects requiring surgical treatment (2-5/10 000 live-births) and carry significant chronic morbidity. ARMs present either as isolated or as part of the phenotypic spectrum of some chromosomal abnormalities or monogenic syndromes. The etiology is unknown. To assess the genetic contribution to ARMs, we investigated single-nucleotide polymorphisms and copy number variations (CNVs) at genome-wide scale. A total of 363 Han Chinese sporadic ARM patients and 4006 Han Chinese controls were included. Overall, we detected a 1.3-fold significant excess of rare CNVs in patients. Stratification of patients by presence/absence of other congenital anomalies showed that while syndromic ARM patients carried significantly longer rare duplications than controls (P = 0.049), non-syndromic patients were enriched with both rare deletions and duplications when compared with controls (P = 0.00031). Twelve chromosomal aberrations and 114 rare CNVs were observed in patients but not in 868 controls nor 11 943 healthy individuals from the Database of Genomic Variants. Importantly, these aberrations were observed in isolated ARM patients. Gene-based analysis revealed 79 genes interfered by CNVs in patients only. In particular, we identified a de novo DKK4 duplication. DKK4 is a member of the WNT signaling pathway which is involved in the development of the anorectal region. In mice, Wnt disruption results in ARMs. Our data suggest a role for rare CNVs not only in syndromic but also in isolated ARM patients and provide a list of plausible candidate genes for the disorder.postprin

Identification of a Regulatory T Cell Specific Cell Surface Molecule that Mediates Suppressive Signals and Induces Foxp3 Expression

Regulatory T (Treg) cells control immune activation and maintain tolerance. How Tregs mediate their suppressive function is unclear. Here we identified a cell surface molecule, called GARP, (or LRRC32), which within T cells is specifically expressed in Tregs activated through the T cell receptor (TCR). Ectopic expression of GARP in human naïve T (TN) cells inhibited their proliferation and cytokine secretion upon TCR activation. Remarkably, GARP over-expression in TN cells induced expression of Treg master transcription factor Foxp3 and endowed them with a partial suppressive function. The extracellular but not the cytoplasmic region of GARP, was necessary for these functions. Silencing Foxp3 in human Treg cells reduced expression of GARP and attenuated their suppressive function. However, GARP function was not affected when Foxp3 was downregulated in GARP-overexpressing cells, while silencing GARP in Foxp3-overexpressing cells reduced their suppressive activity. These findings reveal a novel cell surface molecule-mediated regulatory mechanism, with implications for modulating aberrant immune responses

Appropriate model use for predicting elevations and inundation extent for extreme flood events

Flood risk assessment is generally studied using flood simulation models; however, flood risk managers often simplify the computational process; this is called a “simplification strategy”. This study investigates the appropriateness of the “simplification strategy” when used as a flood risk assessment tool for areas prone to flash flooding. The 2004 Boscastle, UK, flash flood was selected as a case study. Three different model structures were considered in this study, including: (1) a shock-capturing model, (2) a regular ADI-type flood model and (3) a diffusion wave model, i.e. a zero-inertia approach. The key findings from this paper strongly suggest that applying the “simplification strategy” is only appropriate for flood simulations with a mild slope and over relatively smooth terrains, whereas in areas susceptible to flash flooding (i.e. steep catchments), following this strategy can lead to significantly erroneous predictions of the main parameters—particularly the peak water levels and the inundation extent. For flood risk assessment of urban areas, where the emergence of flash flooding is possible, it is shown to be necessary to incorporate shock-capturing algorithms in the solution procedure, since these algorithms prevent the formation of spurious oscillations and provide a more realistic simulation of the flood levels

Follow-Up of Patients with Multidrug Resistant Tuberculosis Four Years after Standardized First-Line Drug Treatment

Background: In 2004, an anti-tuberculosis (TB) drug resistance survey in Heilongjiang province, China, enrolled 1574 (79%) new and 421 (21%) retreatment patients. Multi-drug resistant (MDR) TB was detected in 7.2% of new and 30.4% of retreatment patients. All received treatment with standardized first-line drug (FLD) regimens. Methodology/Principal Findings: We report treatment outcomes of the 2004 cohort, and long-term outcomes as assessed in the second half of 2008. The reported cure rate for MDR-TB patients was 83% (94/113) among new and 66% (85/128) among retreatment patients (P<0.001). Ten of the 241 MDR-TB patients died during treatment. Of the remaining 231, 129 (56%) could be traced in 2008. The overall recurrence rates among new and retreatment cases were 46% and 66%, respectively (P=0.03). The overall death rates among new and retreatment cases were 25% and 46%, respectively (P=0.02). Forty percent of the traced new cases and 24% of the retreatment cases were alive and without recurrent TB (P=0.01). Of the 16 patients who failed or defaulted from treatment in 2004, only two patients were not re-diagnosed with TB by 2008. Of the 111 (86%) patients with an initial successful treatment outcome 63 (57%) had developed recurrent TB, 40 (36%) had died, 27 (24%) of them died of TB. The follow-up period of four years precluded follow-up of all patients. In a highly conservative sensitivity analysis in which we assumed that all non-included patients were alive and did not have recurrent TB, the recurrence and death rate were 33% and 21%. Conclusions/Significance: Documentation of cure based on conventional smear microscopy was a poor predictor of long term outcomes. MDR-TB patients in Heilongjiang province in China had high recurrence and death rates four years after treatment with standardized FLD regimens, reinforcing the need for early diagnosis and treatment of MDR-TB, including assessment of treatment outcomes with more sensitive laboratory method

Crystalline Gaq3Nanostructures: Preparation, Thermal Property and Spectroscopy Characterization

Crystalline Gaq31-D nanostructures and nanospheres could be fabricated by thermal evaporation under cold trap. The influences of the key process parameters on formation of the nanostructures were also investigated. It has been demonstrated that the morphology and dimension of the nanostructures were mainly controlled by working temperature and working pressure. One-dimensional nanostructures were fabricated at a lower working temperature, whereas nanospheres were formed at a higher working temperature. Larger nanospheres could be obtained when a higher working pressure was applied. The XRD, FTIR, and NMR analyses evidenced that the nanostructures mainly consisted of δ-phase Gaq3. Their DSC trace revealed two small exothermic peaks in addition to the melting endotherm. The one in lower temperature region was ascribed to a transition from δ to β phase, while another in higher temperature region could be identified as a transition from β to δ phase. All the crystalline nanostructures show similar PL spectra due to absence of quantum confinement effect. They also exhibited a spectral blue shift because of a looser interligand spacing and reduced orbital overlap in their δ-phase molecular structures

Heme oxygenase-1 prevents smoke induced B-cell infiltrates: a role for regulatory T cells?

<p>Abstract</p> <p>Background</p> <p>Smoking is the most important cause for the development of COPD. Since not all smokers develop COPD, it is obvious that other factors must be involved in disease development. We hypothesize that heme oxygenase-1 (HO-1), a protective enzyme against oxidative stress and inflammation, is insufficiently upregulated in COPD.</p> <p>The effects of HO-1 modulation on cigarette smoke induced inflammation and emphysema were tested in a smoking mouse model.</p> <p>Methods</p> <p>Mice were either exposed or sham exposed to cigarette smoke exposure for 20 weeks. Cobalt protoporphyrin or tin protoporphyrin was injected during this period to induce or inhibit HO-1 activity, respectively. Afterwards, emphysema development, levels of inflammatory cells and cytokines, and the presence of B-cell infiltrates in lung tissue were analyzed.</p> <p>Results</p> <p>Smoke exposure induced emphysema and increased the numbers of inflammatory cells and numbers of B-cell infiltrates, as well as the levels of inflammatory cytokines in lung tissue. HO-1 modulation had no effects on smoke induced emphysema development, or the increases in neutrophils and macrophages and inflammatory cytokines. Interestingly, HO-1 induction prevented the development of smoke induced B-cell infiltrates and increased the levels of CD4⁺CD25⁺T cells and Foxp3 positive cells in the lungs. Additionally, the CD4⁺CD25⁺T cells correlated positively with the number of Foxp3 positive cells in lung tissue, indicating that these cells were regulatory T cells.</p> <p>Conclusion</p> <p>These results support the concept that HO-1 expression influences regulatory T cells and indicates that this mechanism is involved in the suppression of smoke induced B-cell infiltrates. The translation of this interaction to human COPD should now be pursued.</p

Hydrothermally Grown ZnO Micro/Nanotube Arrays and Their Properties

We reported the optical and wettability properties of aligned zinc oxide micro/nanotube arrays, which were synthesized on zinc foil via a simple hydrothermal method. As-synthesized ZnO micro/nanotubes have uniform growth directions along the [0001] orientations with diameters in the range of 100–700 nm. These micro/nanotubes showed a strong emission peak at 387 nm and two weak emission peaks at 422 and 485 nm, respectively, and have the hydrophobic properties with a contact angle of 121°. Single ZnO micro/nanotube-based field-effect transistor was also fabricated, which shows typical n-type semiconducting behavior