66,159 research outputs found
Recommended from our members
Scenarios of energy efficiency and CO2 emissions reduction potential in the buildings sector in China to year 2050
As China’s rapid urbanization continues and urban dwellers become more affluent, energy use in buildings is expected to grow. To understand how this growth can be slowed, we explore four scenarios for Chinese buildings, ranging from a high-energy-demand scenario with no new energy policies to lowest energy demand under a techno-economic-potential scenario that assumes full deployment of cost-effective efficient and renewable technologies by 2050. We show that, in the high energy demand scenario, building energy demand has an average annual growth rate of about 2.8%, with slower growth rates in the other three scenarios. In all scenarios, CO2 emissions grow slower than energy, with building CO2 peaking around 2045 in the high energy demand scenario, and as early as 2030 in the techno-economic-potential scenario. We show that although various technological solutions, systems and practices can be very effective in minimizing building energy use, rigorous policies are needed to overcome multiple implementation barriers
Optimization of Dimples in Microchannel Heat Sink with Impinging Jets—Part B: the Influences of Dimple Height and Arrangement
The combination of a microchannel heat sink with impinging jets and dimples (MHSIJD) can effectively improve the flow and heat transfer performance on the cooling surface of electronic devices with very high heat fluxes. Based on the previous work by analysing the effect of dimple radius on the overall performance of MHSIJD, the effects of dimple height and arrangement were numerically analysed. The velocity distribution, pressure drop, and thermal performance of MHSIJD under various dimple heights and arrangements were presented. The results showed that: MHSIJD with higher dimples had better overall performance with dimple radius being fixed; creating a mismatch between the impinging hole and dimple can solve the issue caused by the drift phenomenon; the mismatch between the impinging hole and dimple did not exhibit better overall performance than a well-matched design
Recommended from our members
Energy and CO2 implications of decarbonization strategies for China beyond efficiency: Modeling 2050 maximum renewable resources and accelerated electrification impacts
Energy efficiency has played an important role in helping China achieve its domestic and international energy and climate change mitigation targets, but more significant near-term actions to decarbonize are needed to help China and the world meet the Paris Agreement goals. Accelerating electrification and maximizing supply-side and demand-side renewable adoption are two recent strategies being considered in China, but few bottom-up modeling studies have evaluated the potential near-term impacts of these strategies across multiple sectors. To fill this research gap, we use a bottom-up national end-use model that integrates energy supply and demand systems and conduct scenario analysis to evaluate even lower CO2 emissions strategies and subsequent pathways for China to go beyond cost-effective efficiency and fuel switching. We find that maximizing non-conventional electric and renewable technologies can help China peak its national CO2 emissions as early as 2025, with significant additional CO2 emission reductions on the order of 7 Gt CO2 annually by 2050. Beyond potential CO2 reductions from power sector decarbonization, significant potential lies in fossil fuel displaced by renewable heat in industry. These results suggest accelerating the utilization of non-conventional electric and renewable technologies present additional CO2 reduction opportunities for China, but new policies and strategies are needed to change technology choices in the demand sectors. Managing the pace of electrification in tandem with the pace of decarbonization of the power sector will also be crucial to achieving CO2 reductions from the power sector in a scenario of increased electrification
Comparative study of commercial building energy-efficiency retrofit policies in four pilot cities in China
The energy efficiency of existing commercial buildings is more challenging to regulate and improve than the energy efficiency of new constructions. In 2011 and 2012, the Chinese Government selected four cities- Shanghai, Tianjin, Shenzhen, and Chongqing- to implement pilot commercial building energy efficiency retrofit program. Based on site surveys and expert interviews in these pilot cities, this research conducted a comparative analysis on incentive policies of local city level. The analysis results show that policy designs of existing commercial buildings should be further improved. The aspects that influence the implementation effect in the future, such as subsidy level, installments, and business model promotion, should be specified in the policy clauses. Referring to the technical solution and cost-benefit in Chongqing, we found that lighting system is the most common retrofit objects while envelope system is the least common one. And the subsidy incentive is greatest for educational buildings, followed by office buildings. In the end, we further discussed the problems and obstacles in commercial building retrofit market, and provided a series of recommendations
Recommended from our members
China's energy consumption in the building sector: A Statistical Yearbook-Energy Balance Sheet based splitting method
China's energy consumption in the building sector (BEC) is not counted as a separate type of energy consumption, but divided and mixed in other sectors in China's statistical system. This led to the lack of historical data on China's BEC. Moreover, previous researches' shortages such as unsystematic research on BEC, various estimation methods with complex calculation process, and difficulties in data acquisition resulted in “heterogeneous” of current BEC in China. Aiming to these deficiencies, this study proposes a set of China building energy consumption calculation method (CBECM) by splitting out the building related energy consumption mixed in other sectors in the composition of China Statistical Yearbook-Energy Balance Sheet. Then, China's BEC from 2000 to 2014 are estimated using CBECM and compared with other studies. Results show that, from 2000 to 2014, China's BEC increased 1.7 times, rising from 301 to 814 million tons of standard coal consumed, with the BEC percentage of total energy consumption stayed relatively stable between 17.7% and 20.3%. By comparison, we find that our results are reliable and the CBECM has the following advantages over other methods: data source is authoritative, calculation process is concise, and it is easy to obtain time series data on BEC etc. The CBECM is particularly suitable for the provincial government to calculate the local BEC, even in the circumstance with statistical yearbook available only
The inhabited environment, infrastructure development and advanced urbanization in China's Yangtze River Delta Region
This paper analyzes the relationship among the inhabited environment, infrastructure development and environmental impacts in China's heavily urbanized Yangtze River Delta region. Using primary human environment data for the period 2006-2014, we examine factors affecting the inhabited environment and infrastructure development: urban population, GDP, built-up area, energy consumption, waste emission, transportation, real estate and urban greenery. Then we empirically investigate the impact of advanced urbanization with consideration of cities' differences. Results from this study show that the growth rate of the inhabited environment and infrastructure development is strongly influenced by regional development structure, functional orientations, traffic network and urban size and form. The effect of advanced urbanization is more significant in large and mid-size cities than huge and mega cities. Energy consumption, waste emission and real estate in large and mid-size cities developed at an unprecedented rate with the rapid increase of economy. However, urban development of huge and mega cities gradually tended to be saturated. The transition development in these cities improved the inhabited environment and ecological protection instead of the urban construction simply. To maintain a sustainable advanced urbanization process, policy implications included urban sprawl control polices, ecological development mechanisms and reforming the economic structure for huge and mega cities, and construct major cross-regional infrastructure, enhance the carrying capacity and improvement of energy efficiency and structure for large and mid-size cities
Building stock dynamics and its impacts on materials and energy demand in China
China hosts a large amount of building stocks, which is nearly 50 billion square meters. Moreover, annual new construction is growing fast, representing half of the world's total. The trend is expected to continue through the year 2050. Impressive demand for new residential and commercial construction, relative shorter average building lifetime, and higher material intensities have driven massive domestic production of energy intensive building materials such as cement and steel. This paper developed a bottom-up building stock turnover model to project the growths, retrofits and retirements of China's residential and commercial building floor space from 2010 to 2050. It also applied typical material intensities and energy intensities to estimate building materials demand and energy consumed to produce these building materials. By conducting scenario analyses of building lifetime, it identified significant potentials of building materials and energy demand conservation. This study underscored the importance of addressing building material efficiency, improving building lifetime and quality, and promoting compact urban development to reduce energy and environment consequences in China
The genetic diversity and geographical separation study of Oncomelania hupensis populations in mainland China using microsatellite loci
© 2016 Guan et al. Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0
International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and
reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to
the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver
(http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated. The attached file is the published version of the article.NHM Repositor
Determinants of immediate price impacts at the trade level in an emerging order-driven market
The common wisdom argues that, in general, large trades cause large price
changes, while small trades cause small price changes. However, for extremely
large price changes, the trade size and news play a minor role, while the
liquidity (especially price gaps on the limit order book) is a more influencing
factor. Hence, there might be other influencing factors of immediate price
impacts of trades. In this paper, through mechanical analysis of price
variations before and after a trade of arbitrary size, we identify that the
trade size, the bid-ask spread, the price gaps and the outstanding volumes at
the bid and ask sides of the limit order book have impacts on the changes of
prices. We propose two regression models to investigate the influences of these
microscopic factors on the price impact of buyer-initiated partially filled
trades, seller-initiated partially filled trades, buyer-initiated filled
trades, and seller-initiated filled trades. We find that they have
quantitatively similar explanation powers and these factors can account for up
to 44% of the price impacts. Large trade sizes, wide bid-ask spreads, high
liquidity at the same side and low liquidity at the opposite side will cause a
large price impact. We also find that the liquidity at the opposite side has a
more influencing impact than the liquidity at the same side. Our results shed
new lights on the determinants of immediate price impacts.Comment: 21 IOP tex pages including 5 figures and 5 tables. Accepted for
publication in New Journal of Physic
- …