2,823 research outputs found
Recommended from our members
Toward improved streamflow forecasts: Value of semidistributed modeling
The focus of this study is to assess the performance improvements of semidistributed applications of the U.S. National Weather Service Sacramento Soil Moisture Accounting model on a watershed using radar-based remotely sensed precipitation data. Specifically, performance comparisons are made within an automated multicriteria calibration framework to evaluate the benefit of "spatial distribution" of the model input (precipitation), structural components (soil moisture and streamflow routing computations), and surface characteristics (parameters). A comparison of these results is made with those obtained through manual calibration. Results indicate that for the study watershed, there are performance improvements associated with semidistributed model applications when the watershed is partitioned into three subwatersheds; however, no additional benefit is gained from increasing the number of subwatersheds from three to eight. Improvements in model performance are demonstrably related to the spatial distribution of the model input and streamflow routing. Surprisingly, there is no improvement associated with the distribution of the surface characteristics (model parameters)
Recommended from our members
Modification of the National Weather Service Distributed Hydrologic Model for subsurface water exchanges between grids
To account for spatial variability of precipitation, as well as basin physiographic properties, the National Weather Service (NWS) has developed a distributed version of its hydrologic component, termed the Hydrology Laboratory-Research Distributed Hydrologic Model (HL-RDHM). Because channels are the only source of water exchange between neighboring computational elements, the absence of such exchange has been identified as a weakness in the model. The primary objective of this paper is to modify the model structure to account for subsurface water exchanges without dramatically altering the conceptual framework of the water balance module. The subsurface exchanges are established by partitioning the slow response components released from the lower layer storages into two parts: the first part involves the grid's conceptual channel, while the second is added to the lower layer storages of the downstream pixel. Realizing the deficiency of the water balance module to locate the lower zone layers in sufficient depths, a complementary study is conducted to test the feasibility of further improvement in the modified model by equally shifting downward the lower zone layers of all pixels over the basin. The Baron Fork at Eldon, Oklahoma, is chosen as the test basin. Ten years of grid-based multisensor precipitation data are used to investigate the effects of the modification, plus shifting the lower zone layers on model performance. The results show that the modified-shifted HL-RDHM can markedly improve the streamflow simulations at the interior point, as well as very high peak-flow simulations at the basin's outlet. Copyright 2011 by the American Geophysical Union
Zdravstveno stanje osoba profesionalno izloženih radiovalovima
The findings of medical examinations performed in two groups of persons occupationally exposed to microwaves and radiofrequency radiation are presented in comparison with control findings. A group of 49 radar operators from the Zagreb Air Traffic Control was examined twice within a period of 18 months. The other group comprised 46 workers employed in radio relay stations. The control group were 46 workers from the Zagreb Airport. A follow-up study showed significant changes in haematological and biochemical parameters, in electrical brain activity and in capillaroscopic and ophthalmological findings in the group of radar operators within the followed period. For that group a cross-sectional study of the differences in general health status also showed the highest rate of changes. The results indicate that long-term occupational exposure to microwaves and radiofrequencies may damage sensitive organic systems.U radu su analizirani i komentirani nalazi medicinskih pretraga dviju skupina osoba izloženih mikrovalnom i radiofrekventnom zračenju i usporedive kontrolne skupine. Prvu izloženu skupinu čini 49 radarskih tehničara kontrole leta. Oni su pregledani dva puta u razmaku od 18 mjeseci. Drugu izloženu skupinu čini 46 radnika zaposlenih u poštanskim radiorelejnim stanicama. U kontrolnoj je skupini 46 radnika aerodromskih službi. Longitudinalna studija pokazuje značajne promjene u hematološkim i biokemijskim parametrima, električnoj aktivnosti mozga te u kapilaroskopskom i oftalmološkom statusu tijekom praćenog razdoblja. Transverzalna studija razlika u općem zdravstvenom stanju pregledanih skupina pokazuje da nalazi medicinskih pretraga najčešće odstupaju od normalnih u skupini radarskih tehničara. Rezultati rada upućuju na mogućnost da dugotrajna profesionalna izloženost mikrovalovima i radiofrekvencijama može oštetiti osjetljive organske sustave
Recommended from our members
A high resolution coupled hydrologic–hydraulic model (HiResFlood-UCI) for flash flood modeling
HiResFlood-UCI was developed by coupling the NWS's hydrologic model (HL-RDHM) with the hydraulic model (BreZo) for flash flood modeling at decameter resolutions. The coupled model uses HL-RDHM as a rainfall-runoff generator and replaces the routing scheme of HL-RDHM with the 2D hydraulic model (BreZo) in order to predict localized flood depths and velocities. A semi-automated technique of unstructured mesh generation was developed to cluster an adequate density of computational cells along river channels such that numerical errors are negligible compared with other sources of error, while ensuring that computational costs of the hydraulic model are kept to a bare minimum. HiResFlood-UCI was implemented for a watershed (ELDO2) in the DMIP2 experiment domain in Oklahoma. Using synthetic precipitation input, the model was tested for various components including HL-RDHM parameters (a priori versus calibrated), channel and floodplain Manning n values, DEM resolution (10 m versus 30 m) and computation mesh resolution (10 m+ versus 30 m+). Simulations with calibrated versus a priori parameters of HL-RDHM show that HiResFlood-UCI produces reasonable results with the a priori parameters from NWS. Sensitivities to hydraulic model resistance parameters, mesh resolution and DEM resolution are also identified, pointing to the importance of model calibration and validation for accurate prediction of localized flood intensities. HiResFlood-UCI performance was examined using 6 measured precipitation events as model input for model calibration and validation of the streamflow at the outlet. The Nash–Sutcliffe Efficiency (NSE) obtained ranges from 0.588 to 0.905. The model was also validated for the flooded map using USGS observed water level at an interior point. The predicted flood stage error is 0.82 m or less, based on a comparison to measured stage. Validation of stage and discharge predictions builds confidence in model predictions of flood extent and localized velocities, which are fundamental to reliable flash flood warning
A Monte Carlo study of the three-dimensional Coulomb frustrated Ising ferromagnet
We have investigated by Monte-Carlo simulation the phase diagram of a
three-dimensional Ising model with nearest-neighbor ferromagnetic interactions
and small, but long-range (Coulombic) antiferromagnetic interactions. We have
developed an efficient cluster algorithm and used different lattice sizes and
geometries, which allows us to obtain the main characteristics of the
temperature-frustration phase diagram. Our finite-size scaling analysis
confirms that the melting of the lamellar phases into the paramgnetic phase is
driven first-order by the fluctuations. Transitions between ordered phases with
different modulation patterns is observed in some regions of the diagram, in
agreement with a recent mean-field analysis.Comment: 14 pages, 10 figures, submitted to Phys. Rev.
When and where do you want to hide? Recommendation of location privacy preferences with local differential privacy
In recent years, it has become easy to obtain location information quite
precisely. However, the acquisition of such information has risks such as
individual identification and leakage of sensitive information, so it is
necessary to protect the privacy of location information. For this purpose,
people should know their location privacy preferences, that is, whether or not
he/she can release location information at each place and time. However, it is
not easy for each user to make such decisions and it is troublesome to set the
privacy preference at each time. Therefore, we propose a method to recommend
location privacy preferences for decision making. Comparing to existing method,
our method can improve the accuracy of recommendation by using matrix
factorization and preserve privacy strictly by local differential privacy,
whereas the existing method does not achieve formal privacy guarantee. In
addition, we found the best granularity of a location privacy preference, that
is, how to express the information in location privacy protection. To evaluate
and verify the utility of our method, we have integrated two existing datasets
to create a rich information in term of user number. From the results of the
evaluation using this dataset, we confirmed that our method can predict
location privacy preferences accurately and that it provides a suitable method
to define the location privacy preference
Short cavity InGaAsP/InP lasers with dielectric mirrors
Short cavity length (38 µm) lasers have been fabricated using a recently developed microcleavage technique. SiO2-amorphous Si multilayer coatings have been evaported on the lasers to obtain high reflectivity mirrors. The lasers have current thresholds as low as 3.8 mA with 85% reflecting front mirror and high reflectivity rear mirror and 2.9 mA with two high reflectivity mirrors. Single longitudinal mode operation is observed over a wide range of driving currents and temperatures
Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting
The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo-diecasting, their processibility, and the resulting mechanical properties. It was found that solidification of AM series alloys under intensive melt shearing in the unique twin-screw slurry maker during rheo-diecasting gave rise to numerous spheroidal primary magnesium (Mg) particles that were uniformly present in the microstructure. As a result, the network of the beta-Mg17Al12 phase was consistently interrupted by these spheroidal and ductile particles. Such a microstructure reduced the obstacle of deformation and the harmfulness of the beta-Mg17Al12 network on ductility, and therefore improved the ductility of rheo-diecast AM alloys. It was shown that, even with 9 wt pct Al, the elongation of rheo-diecast AM90 still achieved (9 +/- 1.2) pct. Rheodiecasting thus provides an attractive processing route for upgrading the alloy specification of AM series alloys by increasing the aluminum (Al) content while ensuring ductility. Assessment of the processibility of AM series alloys for semisolid processing showed that high Al content AM series alloys are more suitable for rheo-diecasting than low Al content alloys, because of the lower sensitivity of solid fraction to temperature, the lower liquidus temperature, and the smaller interval between the semisolid processing temperature and the complete solidification temperature.This work is supported by the EPSR
- …