X-ray diffraction and atomic force microscopy analysis of twinned crystals: rhombohedral canavalin

The structure of canavalin, the vicilin-class storage protein from jack bean, was refined to 1.7 A resolution in a highly twinned rhombohedral crystal of space group R3 and unit-cell parameters a = b = c = 83.0 A, alpha = beta = gamma = 111.1 degrees. The resulting R and R(free) were 0.176 and 0.245, respectively. The orthorhombic crystal structure (space group C222(1), unit-cell parameters a = 136.5, b = 150.3, c = 133.4 A) was also refined with threefold non-crystallographic symmetry restraints. R and R(free) were 0.181 and 0.226, respectively, for 2.6 A resolution data. No significant difference in the protein structure was seen between these two crystal forms, nor between these two and the hexagonal and cubic crystal forms reported elsewhere [Ko et al. (1993), Acta Cryst. D49, 478-489; Ko et al. (1993), Plant Physiol. 101, 729-744]. A phosphate ion was identified in the lumen of the C-terminal beta-barrel. Lattice interactions showed that the trimeric molecule could be well accommodated in both 'top-up' and 'bottom-up' orientations in a rhombohedral unit cell of the R3 crystal and explained the presence of a high twin fraction. The large inter-trimer stacking interface of the C222(1) crystal may account for its relative stability. Atomic force microscopy (AFM) investigations of the growth of three crystal forms of canavalin indicate the rhombohedral form to be unique. Unlike the other two crystal forms, it contains at least an order of magnitude more screw dislocations and stacking faults than any other macromolecular crystal yet studied, and it alone grows principally by generation of steps from the screw dislocations. The unusually high occurrence of the screw dislocations and stacking faults is attributed to mechanical stress produced by the alternate molecular orientations in the rhombohedral crystals and their organization into discrete domains or blocks. At boundaries of alternate domains, lattice strain is relieved by the formation of the screw dislocations

Mechanisms, kinetics, impurities and defects: consequences in macromolecular crystallization.

The nucleation and growth of protein, nucleic acid and virus crystals from solution are functions of underlying kinetic and thermodynamic parameters that govern the process, and these are all supersaturation-dependent. While the mechanisms of macromolecular crystal growth are essentially the same as for conventional crystals, the underlying parameters are vastly different, in some cases orders of magnitude lower, and this produces very different crystallization processes. Numerous physical features of macromolecular crystals are of serious interest to X-ray diffractionists; the resolution limit and mosaicity, for example, reflect the degree of molecular and lattice order. The defect structure of crystals has an impact on their response to flash-cooling, and terminal crystal size is dependent on impurity absorption and incorporation. The variety and extent of these issues are further unique to crystals of biological macromolecules. All of these features are amenable to study using atomic force microscopy, which provides direct images at the nanoscale level. Some of those images are presented here

Atomic force microscopy in imaging of viruses and virus-infected cells.

Atomic force microscopy (AFM) can visualize almost everything pertinent to structural virology and at resolutions that approach those for electron microscopy (EM). Membranes have been identified, RNA and DNA have been visualized, and large protein assemblies have been resolved into component substructures. Capsids of icosahedral viruses and the icosahedral capsids of enveloped viruses have been seen at high resolution, in some cases sufficiently high to deduce the arrangement of proteins in the capsomeres as well as the triangulation number (T). Viruses have been recorded budding from infected cells and suffering the consequences of a variety of stresses. Mutant viruses have been examined and phenotypes described. Unusual structural features have appeared, and the unexpectedly great amount of structural nonconformity within populations of particles has been documented. Samples may be imaged in air or in fluids (including culture medium or buffer), in situ on cell surfaces, or after histological procedures. AFM is nonintrusive and nondestructive, and it can be applied to soft biological samples, particularly when the tapping mode is employed. In principle, only a single cell or virion need be imaged to learn of its structure, though normally images of as many as is practical are collected. While lateral resolution, limited by the width of the cantilever tip, is a few nanometers, height resolution is exceptional, at approximately 0.5 nm. AFM produces three-dimensional, topological images that accurately depict the surface features of the virus or cell under study. The images resemble common light photographic images and require little interpretation. The structures of viruses observed by AFM are consistent with models derived by X-ray crystallography and cryo-EM

Mechanisms, kinetics, impurities and defects: consequences in macromolecular crystallization.

The nucleation and growth of protein, nucleic acid and virus crystals from solution are functions of underlying kinetic and thermodynamic parameters that govern the process, and these are all supersaturation-dependent. While the mechanisms of macromolecular crystal growth are essentially the same as for conventional crystals, the underlying parameters are vastly different, in some cases orders of magnitude lower, and this produces very different crystallization processes. Numerous physical features of macromolecular crystals are of serious interest to X-ray diffractionists; the resolution limit and mosaicity, for example, reflect the degree of molecular and lattice order. The defect structure of crystals has an impact on their response to flash-cooling, and terminal crystal size is dependent on impurity absorption and incorporation. The variety and extent of these issues are further unique to crystals of biological macromolecules. All of these features are amenable to study using atomic force microscopy, which provides direct images at the nanoscale level. Some of those images are presented here

Atomic force microscopy investigation of viruses.

Atomic force microscopy (AFM) has proven to be a valuable approach to delineate the architectures and detailed structural features of a wide variety of viruses. These have ranged from small plant satellite viruses of only 17 nm to the giant mimivirus of 750 nm diameter, and they have included diverse morphologies such as those represented by HIV, icosahedral particles, vaccinia, and bacteriophages. Because it is a surface technique, it provides images and information that are distinct from those obtained by electron microscopy, and in some cases, at even higher resolution. By enzymatic and chemical dissection of virions, internal structures can be revealed, as well as DNA and RNA. The method is relatively rapid and can be carried out on both fixed and unfixed samples in either air or fluids, including culture media. It is nondestructive and even non-perturbing. It can be applied to individual isolated virus, as well as to infected cells. AFM is still in its early development and holds great promise for further investigation of biological systems at the nanometer scale

TY3 GAG3 protein forms ordered particles in Escherichia coli.

The yeast retrovirus-like element Ty3 GAG3 gene encodes a Gag3 polyprotein analogous to retroviral Gag. Gag3 lacks matrix, but contains capsid, spacer, and nucleocapsid domains. Expression of a Ty3 Gag3 or capsid domain optimized for expression in Escherichia coli was sufficient for Ty3 particle assembly. Virus-like ordered particles assembled from Gag3 were similar in size to immature particles from yeast and contained nucleic acid. However, particles assembled from the CA domain were variable in size and displayed much less organization than native particles. These results indicate that assembly can be driven through interactions among capsid subunits in the particle, but that the nucleocapsid domain, likely in association with RNA, confers order upon this process

Investigation by Atomic Force Microscopy of the Structure of Ty3 Retrotransposon Particles

Ty3, a member of the Metaviridiae family of long-terminal-repeat retrotransposons found in Saccharomyces cerevisiae, encodes homologs of retroviral Gag and Gag-Pol proteins, which, together with genomic RNA, assemble into virus-like particles (VLPs) that undergo processing and reverse transcription. The Ty3 structural proteins, capsid and nucleocapsid, contain major homology and nucleocapsid motifs similar to retrovirus capsid and nucleocapsid proteins, but Ty3 lacks a matrix-like structural domain amino terminal to capsid. Mass spectrometry analysis of Ty3 Gag3 processing products defined an acetylated Ser residue as the amino terminus of Gag3/p34, p27, and CA/p24 species and supported a model where p34 and p27 occur in phosphorylated forms. Using atomic force microscopy, VLPs were imaged from cells producing wild-type and protease and reverse transcriptase mutant Ty3. Wild-type VLPs were found to have a broad range of diameters, but the majority, if not all of the particles, exhibited arrangements of capsomeres on their surfaces which were consistent with icosahedral symmetry. Wild-type particles were in the range of 25 to 52 nm in diameter, with particles in the 42- to 52-nm diameter range consistent with T=7 symmetry. Both classes of mutant VLPs fell into a narrower range of 44 to 53 nm in diameter and appeared to be consistent with T=7 icosahedral symmetry. The smaller particles in the wild-type population likely correspond to VLPs that have progressed to reverse transcription or later stages, which do not occur in the protease and reverse transcriptase mutants. Ty3 VLPs did not undergo major external rearrangements during proteolytic maturation