A novel electrode with multifunction and regeneration for highly efficient and stable symmetrical solid oxide cell

Authors acknowledge financial support from National Key Research & Development Project (2016YFE0126900), National Natural Science Foundation of China (51672095, U1910209), and China Scholarship Council (201806160178). The work is also partially supported by State Key Laboratory of Materials Processing and Die & Mould Technology, Huazhong University of Science and Technology (P2019-004).Symmetrical solid oxide cells (SSOCs) have been extensively recognized due to their simple cell configuration, low cost and reliability. High performance electrode is the key determinant of SSOCs. Herein, a multifunctional perovskite oxide La0.6Ca0.4Fe0.8Ni0.2O3-δ (LCaFN) is investigated as electrode for SSOCs. The results confirm that LCaFN shows excellent oxygen reduction reaction (ORR), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2-RR) and hydrogen oxidation reaction (HOR) catalytic activity. In SOFC mode, the SSOCs with LCaFN achieve good electrochemical performance with maximum power density of 300 mW cm−2 at 800 °C. For pure CO2 electrolysis in SOEC mode, polarization resistance of 0.055 Ω cm2 and current density of 1.5 A cm−2 are achieved at 2.0 V at 800 °C. Besides, the cell shows excellent stability both in SOFC mode and SOEC mode. Most importantly, SSOCs with symmetrical LCaFN electrodes show robust and regenerative performance under anodic or cathodic process during the switching gas, showing the great reliability of the SSOCs. The results show that this novel electrode offers a promising strategy for operation of SSOCs.PostprintPeer reviewe

Achieving strong coherency for a composite electrode via one-pot method with enhanced electrochemical performance in reversible solid oxide cells

We greatly appreciate the financial support from the National Key Research & Development Project (2020YFB1506304, 2017YFE0129300), National Natural Science Foundation of China (52072135), and China Scholarship Council (201806160178).The oxygen electrode with a fast oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and sufficient durability plays a pivotal role in reversible solid oxide cells (RSOCs). Here, we demonstrate a NdBa0.5Ca0.5Co1.5Fe0.5O5+δ@Gd0.1Ce0.9O2−δ (NBCCF@GDC) composite oxygen electrode via a one-pot method for exhibiting strong coherency, which result in boosting the electrochemical performance of RSOCs. The NBCCF@GDC electrode yields a very low polarization resistance (0.106 Ω-cm2 at 800 °C), high electrolysis current density (1.45 A cm–2 with 70 vol % absolute humidity at 1.3 V), and high power density (∼1.3 W cm–2 at 800 °C) and shows excellent reversibility and stability. Notably, strong coherency in these NBCCF@GDC composite materials was successfully revealed by HT-XRD, XPS, STEM, and EELS. The phase contiguity and interfacial coherence between NBCCF and GDC increase the Co oxidation state and the number of active sites, which enhanced the electrocatalytic activity for perovskites. Overall, this work demonstrates a highly desirable strategy for the production of functionalized electrodes for next-generation reversible solid oxide cells.PostprintPeer reviewe

Boosting CO2 electrolysis performance : via calcium-oxide-looping combined with in situ exsolved Ni-Fe nanoparticles in a symmetrical solid oxide electrolysis cell

Financial support from National Key Research & Development Project (2016YFE0126900), National Natural Science Foundation of China (51672095), Hubei Province (2018AAA057) and the EPSRC Capital for Great Technologies Grant EP/L017008/1. We are grateful to the China Scholarship Council for funding (201806160178).The electrocatalysis of CO2 to valuable chemical products is an important strategy to combat global warming. Symmetrical solid oxide electrolysis cells have been extensively recognized for their CO2 electrolysis abilities due to their high efficiency, low cost, and reliability. Here, we produced a novel electrode containing calcium oxide-looping and in situ exsolved Ni–Fe nanoparticles by performing a one-step reduction of La0.6Ca0.4Fe0.8Ni0.2O3−δ (LCaFN). The CO2 captured by CaO was electrolyzed in situ by the Ni–Fe nanocatalysts. The cell with this special cathode showed a higher current density (0.632 A cm−2vs. 0.32 A cm−2) and lower polarization resistance (0.399 Ω cm2vs. 0.662 Ω cm2) than the unreduced LCaFN cathode at 800 °C with an applied voltage of 1.3 V. Use of the developed novel electrode offers a promising strategy for CO2 electrolysis.PostprintPeer reviewe

Feasibility study of temporary permanent pacemaker in patients with conduction block after TAVR

BackgroundLimited data exist on the use of temporary permanent pacemaker (TPPM) to reduce unnecessary PPM in patients with high-degree atrioventricular block (HAVB) after transcatheter aortic valve replacement (TAVR).ObjectivesThis study aims to determine the feasibility of TPPM in patients with HAVB after TAVR to provide prolonged pacing as a bridge.Materials and methodsOne hundred and eleven consecutive patients undergoing TAVR were screened from August 2021 to June 2022. Patients with HAVB eligible for PPM were included. TPPM were used in these patients instead of conventional temporary pacing or early PPM. Patients were followed up for 1 month. Holter and pacemaker interrogation were used to determine whether to implant PPM.ResultsTwenty one patients met the inclusion criteria for TPPM, of which 14 patients were third-degree AVB, 1 patient was second-degree AVB, 6 patients were first degree AVB with PR interval > 240 ms and LBBB with QRS duration > 150 ms. TPPM were placed on the 21 patients for 35 ± 7 days. Among 15 patients with HAVB, 26.7% of them (n = 4) recovered to sinus rhythm; 46.7% (n = 7) recovered to sinus rhythm with bundle branch block. The remains of 26.7% patients (n = 4) still had third-degree AVB and received PPM. For patients with first-degree AVB and LBBB, PR interval shortened to < 200 ms in all 6 patients and LBBB recovered in 2 patients. TPPM were successfully removed from all patients and no procedure-related adverse events occurred.ConclusionTPPM is reliable and safe in the small sample of patients with conduction block after TAVR to provide certain buffer time to distinguish whether a PPM is necessary. Future studies with larger sample are needed for further validation of the current results

Some ideas on the tendencies of information services by the regional information agencies of agricultural science and technology

In IDL-1120

Determination of ϒ-aminobutyric acid (GABA) in jujube fruit (Ziziphus jujuba Mill.)

ϒ-aminobutyric acid (GABA) is a ubiquitous non-proteinaceous amino acid with many health-promoting benefits. GABA in some fruits has been reported previously. However, there have been no previous reports of GABA in jujube fruit. Therefore, the purpose of this study was to investigate the content of GABA in different jujube cultivars and the effect of harvest, drying and storage on GABA of jujube fruit. In six jujube cultivars studied, Z. Jujuba cv. Junzao had the highest GABA content of 333.37 µg.g−1 DW, while Z. Jujuba cv. Dongzao had the lowest GABA content of 150.31 µg.g−1 DW. The GABA content of jujube fruit (Z. jujuba Mill.cv.Junzao) was nearly doubled by delaying harvest time probably due to cold stress, while it was significantly decreased by the treatment of drying and storage. Interestingly, these findings suggest that normal consumption amount of jujube fruit might contain sufficient GABA to produce the effects of improving sleep and lowering blood pressure

Effect of yttrium content on microstructure and tensile properties of as-cast and as-solutionized Al-Zn-Mg-Cu alloys

Four kinds of 7xxx series aluminum alloys with different Y elementcontents were obtained by ordinary gravity casting. The effect of Y content on the microstructure and mechanical properties of as-cast and as-solutionized Al-7.9Zn-3Mg-2.4Cu-0.13Zr (wt%) alloys were investigated by means of x-ray diffraction (XRD), electron backscattering diffraction (EBSD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and room-temperature tensile tests. The results shows that, in as-cast condition, Y element can refine the grain and reduce the content of Mg(Zn, Cu, Al) _2 lamellar phases at the interdendritic. (Al, Zn) _8 Cu _4 Y block-shaped phases form in interdendritic regions. After solution treatment, the undissolved Mg(Zn, Cu, Al) _2 phases evolved from lamellar to bulk-like which distribution in interdendritic, but no obvious change in (Al, Zn) _8 Cu _4 Y phase. The tensile testing results shows that the optimal yttrium content is 0.45 wt%. At 0.45 wt% Y, the ultimate tensile strength and elongation are 267 MPa and 2.4% in as-cast condition and 420 MPa and 3.6% in as-solutionized condition

Study on the spatial specificity of phenolics in fruit of different jujube varieties

Abstract Phenol, an important bioactive substance in jujube fruit, is one of the most important indexes of fruit quality. In order to clarify the phenolic substance composition, content and distribution characteristics of different varieties of jujube fruits, this study measured and compared the content of total phenols, total flavonoids and phenolic substance composition in different parts of fruits of six jujube varieties, and combined with the principal component analysis, the results showed that: Fourteen phenolic substances were identified in the fruits of different jujube varieties, and proanthocyanidins, epicatechin, catechin and rutin were the main components, accounting for 58.60%, 16.08%, 13.56% and 5.57% of the total phenolic substances, respectively. The total phenolic and total flavonoid contents of jujube fruits of each variety were between 18.11 and 21.45 mg GAE/g DW and 10.56–20.25 mg RE/g DW, respectively, and the differences in the contents between the varieties were significant, and the contents of ‘Junzao’ and ‘Jinlingyuanzao’ were higher than those of other varieties.The phenolic content of different parts of jujube fruits showed spatial distribution differences, manifested as the total phenols, total flavonoids and their fractions of the peel were significantly higher than that of the pulp, while the content of the pulp near the kernel was significantly higher than that of other parts of the pulp, This study provides a theoretical basis for analysing the differences in phenolic substances in jujube fruits

Machine-learning assisted compositional optimization of 2xxx series aluminum alloys towards tensile strength

High-strength 2xxx series aluminum alloys (Al-Cu system) have been favored by the aerospace and railway transportation industries. Traditionally, developing new materials with targeted properties is guided by extensive experiments and expert experience, causing the development process to be dismayingly slow and expensive. Here, a Kriging model-based efficient global optimization(EGO) lgorithm is applied to search for new 2xxx series aluminum alloys with high tensile strength in a huge search space. After four iterations, the alloy’s ultimate tensile strength increased by 60 MPa, which is higher than that of the best alloy in the initial data set. This study demonstrates the feasibility of using machine-learning to search for 2xxx alloys with good mechanical performance

Promoting electrocatalytic activity and stability via Er_0.4Bi_1.6O_3−δ in situ decorated La_0.8Sr_0.2MnO_3−δ oxygen electrode in reversible solid oxide cell

Weak electrocatalytic activity of the La0.8Sr0.2MnO3−δ (LSM) oxygen electrode at medium and low temperatures leads to decreasing performance both in the solid oxide fuel cell (SOFC) mode and the solid oxide electrolysis cell (SOEC) mode. Herein, we design an Er0.4Bi1.6O3−δ (ESB) functionalized La0.8Sr0.2MnO3−δ (labeled as LSM/ESB) oxygen electrode via a one-step co-synthesis modified Pechini method. The unique LSM/ESB with polarization resistance of only 0.029 Ω·cm2 at 750 °C enables a highly enhanced rate of oxygen reduction and evolution reaction. The single cell with the LSM/ESB electrode achieves a maximum power density of 1.747 W cm–2 at 750 °C, 2.6 times higher than that of the mechanically mixed LSM–ESB electrode (0.667 W cm–2). In the SOEC mode, it also shows the improved performance of the LSM/ESB electrode. Furthermore, the cell exhibits admirable durability of 90 h in the fuel cell mode and excellent reversibility. The better performance can be concluded as a better surface-active state and a tighter connection between the LSM and ESB particles of LSM/ESB via a co-synthesis process. This work proposes a novel strategy to advance the application of the one-step modified Pechini technology for an efficient and stable oxygen electrode