Treating of Rayon-flocked Fabric by Atmospheric Pressure Plasma

This study investigates hydrophobisation of the surface of rayon-flocked fabric by means of atmospheric pressure plasma (APP) treatment with tetramethylsilane (TMS). Plasma deposition of TMS is regarded as an effective, single-step low pollution method. A detailed study of the process parameters was conducted. A highly hydrophobic surface was successfully fabricated on rayon-flocked fabric and the hydrophobic surface was found to have good stain resistance to coffee and milk tea

Effective Photodegradation of Methyl Orange Using Fluidized Bed Reactor Loaded with Cross-Linked Chitosan Embedded Nano-CdS Photocatalyst

Chitosan-based photocatalyst composites containing CdS nanocrystals with and without glutaraldehyde or epichlorohydrin cross-linking treatments were investigated and the catalyzed photodegradation of methyl orange in aqueous solution was examined. In addition, the effects of catalyst dosage, initial dye concentration, and initial pH of the dye solution on the photodegradation kinetics were investigated. In this study, the effect of initial solution pH was more important than other factors. The photocatalyst composite could remove 99% dye in 80 minutes at pH 4. The catalyst composite was characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR), and visible reflectance spectroscopy. The dye removal mechanism of methyl orange involved an initial sorption process followed by photodegradation. The sorption process underwent the pseudo-second order kinetics, while photodegradation followed the Langmuir-Hinshelwood kinetics. Although the glutaraldehyde cross-linked chitosan enhanced the initial dye sorption, the epichlorohydrin cross-linked catalyst composite demonstrated a better overall dye removal performance, especially in the photodegradation step. Both chitosan encapsulated catalyst with and without epichlorohydrin cross-linking demonstrated the same pseudo-first order photodegradation kinetic constant of 0.026 min−1 and the same dye removal capacity. The catalyst composite could be reused but the photocatalytic activity dropped successively in each cycle

Spatial analysis of the impact of urban geometry and socio-demographic characteristics on COVID-19, a study in Hong Kong

The World Health Organization considered the widespread of COVID-19 over the world as a pandemic. There is still a lack of understanding of its origin, transmission, and treatment methods. Understanding the influencing factors of the COVID-19 can help mitigate its spread, but little research on the spatial factors has been conducted. Therefore, this study explores the effects of urban geometry and socio-demographic factors on the COVID-19 cases in Hong Kong. For each patient, the places they visited during the incubation period before going to hospital were identified, and matched with corresponding attributes of urban geometry (i.e., building geometry, road network, greenspace) and socio-demographic factors (i.e., demographic, educational, economic, household and housing characteristics) based on the coordinates. The local cases were then compared with the imported cases using the stepwise logistic regression, the logistic regression with case-control of time, and the least absolute shrinkage and selection operator regression to identify factors influencing local disease transmission. Results show that the building geometry, road network and certain socio-economic characteristics are significantly associated with COVID-19 cases. In addition, the results indicate that urban geometry is playing a more important role than the socio-demographic characteristics in affecting the COVID-19 incidences. These findings provide a useful reference to the government and the general public as to the spatial vulnerability of the COVID-19 transmission and to take appropriate preventive measures in high-risk areas

Global, regional, and national burden of disorders affecting the nervous system, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BackgroundDisorders affecting the nervous system are diverse and include neurodevelopmental disorders, late-life neurodegeneration, and newly emergent conditions, such as cognitive impairment following COVID-19. Previous publications from the Global Burden of Disease, Injuries, and Risk Factor Study estimated the burden of 15 neurological conditions in 2015 and 2016, but these analyses did not include neurodevelopmental disorders, as defined by the International Classification of Diseases (ICD)-11, or a subset of cases of congenital, neonatal, and infectious conditions that cause neurological damage. Here, we estimate nervous system health loss caused by 37 unique conditions and their associated risk factors globally, regionally, and nationally from 1990 to 2021.MethodsWe estimated mortality, prevalence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs), with corresponding 95% uncertainty intervals (UIs), by age and sex in 204 countries and territories, from 1990 to 2021. We included morbidity and deaths due to neurological conditions, for which health loss is directly due to damage to the CNS or peripheral nervous system. We also isolated neurological health loss from conditions for which nervous system morbidity is a consequence, but not the primary feature, including a subset of congenital conditions (ie, chromosomal anomalies and congenital birth defects), neonatal conditions (ie, jaundice, preterm birth, and sepsis), infectious diseases (ie, COVID-19, cystic echinococcosis, malaria, syphilis, and Zika virus disease), and diabetic neuropathy. By conducting a sequela-level analysis of the health outcomes for these conditions, only cases where nervous system damage occurred were included, and YLDs were recalculated to isolate the non-fatal burden directly attributable to nervous system health loss. A comorbidity correction was used to calculate total prevalence of all conditions that affect the nervous system combined.FindingsGlobally, the 37 conditions affecting the nervous system were collectively ranked as the leading group cause of DALYs in 2021 (443 million, 95% UI 378–521), affecting 3·40 billion (3·20–3·62) individuals (43·1%, 40·5–45·9 of the global population); global DALY counts attributed to these conditions increased by 18·2% (8·7–26·7) between 1990 and 2021. Age-standardised rates of deaths per 100 000 people attributed to these conditions decreased from 1990 to 2021 by 33·6% (27·6–38·8), and age-standardised rates of DALYs attributed to these conditions decreased by 27·0% (21·5–32·4). Age-standardised prevalence was almost stable, with a change of 1·5% (0·7–2·4). The ten conditions with the highest age-standardised DALYs in 2021 were stroke, neonatal encephalopathy, migraine, Alzheimer's disease and other dementias, diabetic neuropathy, meningitis, epilepsy, neurological complications due to preterm birth, autism spectrum disorder, and nervous system cancer.InterpretationAs the leading cause of overall disease burden in the world, with increasing global DALY counts, effective prevention, treatment, and rehabilitation strategies for disorders affecting the nervous system are needed

A double-track greedy algorithm for VLSI channel routing

published_or_final_versionElectrical and Electronic EngineeringMasterMaster of Philosoph

EFFECT OF OXYGEN PLASMA PRETREATMENT AND TITANIUM DIOXIDE OVERLAY COATING ON FLAME RETARDANT FINISHED COTTON FABRICS

Flammability properties of plasma pretreated cotton fabrics subjected to flame-retardant treatment were studied. Plasma pretreatment, using an atmospheric pressure plasma jet (APPJ), was applied to cotton fabrics to enhance material properties, while retaining inherent advantages of the substrates. An organic phosphorus compound (flame-retardant agent, FR) together with a melamine resin (crosslinking agent, CL) and phosphoric acid (catalyst, PA) were used. Titanium dioxide (TiO2) or nano-TiO2 was used as a co-catalyst for cotton fabrics to improve treatment effectiveness and minimize side effects. Surface morphology of plasma pretreated cotton specimens subjected to flame-retardant treatment showed a roughened and wrinkled fabric surface with high deposition of the finishing agent, caused by an etching effect of plasma and attack of acidic FR. Combustibility of FR-CL-PA-TiO2 and FR-CL-PA-Nano-TiO2 treated fabrics was evaluated by a 45° flammability test. FR-CL-PA-treated specimens showed superior flame-retardancy, which was further improved by plasma pretreatment and addition of metal oxide as a co-catalyst. However, in comparison with the control sample, flame-retardant-treated cotton specimens had lower breaking load and tearing strength, resulting from side effects of the crosslinking agent used, while plasma pretreatment might compensate for the reduction in tensile strength caused by flame-retardant agents. In addition, both plasma pretreatment and metal oxide co-catalyst added in the flame-retardant finishing improved the crosslinking process between FR and cotton fabric, minimizing formation of free formaldehyde and allowing the use of FR in industry

EFFECT OF METAL OXIDE ON ANTI-MICROBIAL FINISHING OF COTTON FABRIC

Cellulosic fibres provide a very agreeable environment for growth of bacteria due to large surfaces with high moisture absorbability. Therefore, the demand for an anti-microbial finish as an effective means of preventing disease transmission is high; it inhibits growth of or kills microorganisms on textile fabrics. This paper reports results of experiments where silver oxide (Ag2O) or zinc oxide (ZnO) was used as a catalyst with the halogenated phenoxy compound (Microfresh, MF) and a binder (Microban, MB) on cotton fabrics to improve treatment effectiveness and minimize its side effects. Anti-microbial-treated fabrics showed some new characteristic peaks in chemical structure as evaluated by Fourier Transform Infrared Spectroscopy. In an anti-microbial test, it was found that anti-bacterial activity increased as MF-MB chemical agents were applied to the fabrics. A noticeable result was that the metal oxide catalyst had a significant effect on enhancing the performance. Surface morphology of anti-microbial-treated cotton specimens showed roughened and wrinkled fabric surface with high deposition of the finishing agent, which had a lower breaking load and tearing strength resulting from side effects of the acidic treatment. However, the addition of the Ag2O catalyst was able to compensate for the reduction in tensile and tearing strength, and it is considered harmless for human skin

USING AGEING EFFECT FOR HYDROPHOBIC MODIFICATION OF COTTON FABRIC WITH ATMOSPHERIC PRESSURE PLASMA

A hydrophobic modification of cotton fabric was demonstrated with atmospheric pressure plasma treatment with oxygen as the reactive gas. Oxygen plasma was determined to be capable of inducing hydrophobic modification of cotton fabric surface by utilizing the ageing effect. Upon ageing, the surface polarity was reversed and hydrophobic aliphatic hydrocarbons were formed, which was confirmed by Fourier Transform Infrared Spectroscopy. Surface hydrophobicity was quantified by the wetting area measurement. Wetted area of plasma-modified cotton was found to be strongly dependent on plasma-induced surface structures and the chemical composition on the fiber surface. Scanning electron microscopy revealed that physical morphological alteration was also a crucial factor that contributed to surface hydrophobicity. This work seeks to determine a controlled hydrophobic modification of textile materials through optimization of plasma process based on the Orthogonal Array Testing Strategy (OATS). Optimum process conditions were determined based on reduction of wetted area of plasma-modified cotton fabrics. Finally, hydrophobicity of plasma-modified cotton fabric was compared with conventional water repellency treatment