47,083 research outputs found
Recommended from our members
Interactive product catalogue with user preference tracking
In the context of m-commerce, small screen size poses serious difficulty for users to browse effectively through a product catalogue, given the limited number of products that may be presented on-screen. Despite the availability of search engines, filters and recommender systems to aid users, these techniques focus on a narrow segment of product offering. The users are thus denied the opportunity to do a more expansive exploration of the products available. This paper describes a novel approach to overcome the constraints of small screen size. Through integration of a product catalogue with a recommender system, an adaptive system has been created that guides users through the process of product browsing. An original technique has been developed to cluster similar positive examples together to identify areas of interest of a user. The performance of this technique has been evaluated and the results proved to be promising
Recommended from our members
The effect of tube diameter on vertical two-phase flow regimes in small tubes
Flow boiling flow patterns in four circular tubes with internal diameters of 1.10, 2.01, 2.88 and 4.26 mm were investigated in the present project. The experiments were conducted in vertical upward two-phase flow using R134a as the working fluid. The observed flow patterns include dispersed bubble, bubbly, confined bubble, slug, churn, annular and mist flow. The flow characteristics in the 2.88 and 4.26 mm tubes are similar to those typically described in normal size tubes. The smaller diameter tubes, 1.10 and 2.01 mm, exhibit strong "small tube characteristics" as described in earlier studies. The sketched flow maps show that the transition boundaries of slug-churn and churn-annular depend strongly on diameter. On the contrary, the dispersed bubble to churn and bubbly to slug boundaries are less affected. The transition boundaries are compared with existing models for normal size tubes showing poor agreement
Recommended from our members
R134a flow patterns in small diameter tubes
R134a vapour-liquid two-phase flow patterns were studied in vertical small diameter tubes. The observed flow patterns include bubbly, dispersed bubble, slug, churn, annular and mist flow. Six integrated flow pattern maps, derived for two internal diameters (2.01 and 4.26 mm) and three different pressures (6.0, 10.0, 14.0 bar), are presented. Some transition boundaries, such as slug-churn and churn-annular, were found to be very sensitive to diameter and pressure. On the contrary, the boundaries of dispersed bubble-churn and bubbly-slug are less affected. The transition boundaries are compared with the existing models for normal size tubes showing significant differences
Recommended from our members
Vertical upward flow patterns in small diameter tubes
Two-phase flow patterns were studied in vertical small diameter tubes using R134a as the working fluid. The observed flow patterns include bubbly, dispersed bubble, confined bubble, slug, churn, annular and mist flow. Twelve flow pattern maps, derived from four internal diameters (1.10, 2.01, 2.88 and 4.26 mm) and three different pressures (6, 10, 14 bar), are presented. The flow patterns exhibit strong âsmall tube characteristicsâ described in earlier studies when the tube diameter is 2 mm or less. Slug-churn and churn-annular boundaries depend on diameter and pressure. Dispersed bubble-churn and bubbly-slug are less affected. The transition boundaries are compared with existing models for normal size tubes showing poor agreement. Various coordinate systems were considered for the flow maps. The results show that the Lockhard-Martinelli Parameter and mass flow flux can account for the effect of fluid pressure on flow patterns
Hepatic stellate cells and parasite-induced liver fibrosis
ABSTRACT: Fibrogenesis is a common feature of many diseases where there is severe insult to the liver. The hepatic stellate cell trans-differentiation into a myofibroblast has been identified as an important event in liver fibrogenesis and has been well investigated over the last few years in a number of liver diseases. The trans-differentiation process can be monitored in vitro by evaluation of biomarkers that are characteristic of normal quiescent hepatic stellate cells or activated myofibroblasts. Two major parasitic diseases associated with liver injury and fibrosis are schistosomiasis and echinococcosis. Recent studies have highlighted a role for activated hepatic stellate cells in both murine and human schistosomiasis as well as demonstrating that schistosome antigens are able to regulate this trans-differentiation process. Study of the hepatic stellate cell and its interaction with parasite-derived antigens may be pivotal in our understanding of the pathology associated with schistosomiasis and other parasitic diseases, including echinococcosis, as well as revealing new information on the trans-differentiation process in this cell type
Recommended from our members
WSN based intelligent cold chain management
This paper presents a cold chain monitoring system which is implemented by using ubiquitous computing technologies, Radio Frequency Identification (RFID) & Wireless Sensor Network (WSN). In this paper, we discuss how cold supply chain works and how we can monitor and control cold supply chain by using wireless tracking and sensing technologies. We propose a prototype design which will provide a well controlled and transparent cold chain system, which could help the users to manage their productsâ environmental data in real time during the life cycle. Moreover, we highlight how the availability of product trace data in combination with historical condition-monitoring data can facilitate decision-making processes enhancing supply chainâs performance. Finally we discuss the integration works of these two technologies together in the cold supply chain management system. Hardware and software platform of WSN used in this system are also described in this paper
Emission characteristics of CO, NOx, SO2 and indications of biomass burning observed at a rural site in eastern China
Atmospheric O3, CO, SO2, and NO* y (NO* y â NO + NO2 + PAN + organic nitrates + HNO3 + N2O5 + âŻ) were measured in 1999-2000 at a rural/agricultural site in the Yangtze Delta of China. In this paper we analyze the measurement results to show the emission characteristics of the measured gases and to infer relevant emission ratios. Positive correlations were found between CO and NO* y with a slope (Î[CO]/Î[NO* y]) of 36 (ppbv/ppbv) for the winter and nighttime measurements. The ratio is considerably larger than that (â10 ppbv/ppbv) observed in the industrialized countries. The highest CO/NO* y ratio (30-40 ppbv/ppbv) occurred in September-December 1999 and June 2000. The good correlation between CO and the biomass burning tracer CH3Cl and the lack of correlation with the industrial tracer C2Cl4 suggests that the burning of biofuels and crop residues is a major source for the elevated CO and possibly for other trace gases as well. The average SO2 to NO* y ratio was 1.37 ppbv/ppbv, resulting from the use of relatively high-sulfur coals in China. The measured SO2/NO* y and ÎCO/ÎNO* y were compared with the respective ratios from the current emission inventories for the study region, which indicated a comparable SO2/NOx emission ratio but a large discrepancy for CO/NOx. The observed CO to NO* y ratio was more than 3 times the emission ratio derived from the inventories, indicating the need for further improvement of emission estimates for the rural/agricultural regions in China. Additional research will be needed to study the implications of rural emissions to atmospheric chemistry and climate on both regional and global scales.Department of Civil and Environmental Engineerin
Recommended from our members
Boiling two-phase pressure drop in small diameter tubes
An experimental study of two-phase pressure drop in small diameter tubes is described in this paper. Stainless steel tubes of internal diameter and length of 4.26 mm, 500 mm and 2.01 mm, 211 mm were used. The working fluid was R134a and the range covered was: mass flux 100 â 500 kg/m2s; system pressure 8-14 bar and exit quality up to 0.9. The heat flux applied to the tubes ranged from 13 â 150 kW/m2. The effect of diameter on pressure drop is discussed in this paper and a detailed presentation of the results of the comparison with existing pressure drop correlations, some particularly developed for small tubes, is given
Epidemiological, clinical and laboratory characteristics of 19 serologically confirmed rickettsial disease in Singapore.
AIM: To identify epidemiological, clinical and laboratory features of serologically-proven typhus in the local setting. METHOD & RESULTS: Retrospective study looking at rickettsial serologies done over a six-month period and collection of the epidemological, clinical, laboratory and treatment response data from the case notes of the patients with an ordered rickettsial serology. Twenty of the 35 cases had a positive serology. Of these 20 patients, 18 were already clinically diagnosed as having murine typhus. All except one were males and all were migrant workers. Majority of the patients were construction workers staying in containers where rats abound. The most consistent clinical features were high fever (100%) for a median period of seven days, headache (94%) and cough (47%). The white cell count was usually normal (74%) but thrombocytopenia was common (68%). Transaminitis was also common (90%) with the AST component higher than the ALT in half of the cases. Response to doxycycline therapy was rapid and most (88%) were afebrile by 72 hours. CONCLUSION: Typhus (notably murine type) can be confidently diagnosed from consistent clinical features supported by epidemiological and laboratory clues. Early recognition with the prompt treatment response will result in shorter hospital stay with decreased cost. Serological testing may only prove useful in difficult situations when the clinical diagnosis is less clear
- âŚ