2,201 research outputs found

    Numerical analysis of high-index nanocomposite encapsulant for light-emitting diodes

    Full text link
    We used two-dimensional Finte-Difference-Time-Domain (FDTD) software to study the transition behavior of nano-particles from scatterers to an optically uniform medium. We measured the transmission efficiency of the dipole source, which is located in the high refractive index medium(index=2.00) and encapsulated by low index resin(index=1.41). In an effort to compose index-matched resin and to reduce internal reflection, high-index nano-particles are added to low-index resin in simulations of various sizes and densities. As the size of the nano-particles and the average spacing between particles are reduced to 0.02 lambda and 0.07 lambda respectively, the transmission efficiency improves two-fold compared to that without nanoparticles. The numerical results can be used to understand the optical behavior of nano-particles and to improve the extraction efficiency of high brightness light-emitting-diodes(LEDs), through the use of nano-composite encapsulant.Comment: 9 pages, 5 jpg figure

    IDENTIFYING CRITICAL KINEMATIC PARAMETERS FOR BETTER GOLF PUTTING

    Get PDF
    In modern golf competition, putting is one of the crucial parts of the game. It has been reported that putting accounts for about 40% of all golf shot played in tournaments (Gwyn & Patch, 1993). Wiren (1992) also indicated that, on average, putting constitutes 38% of all golf strokes in competition and improving putting skills is th e fastest way to lower the score. However, it is also true that most recreational golfers neglect the putting and seldom practice it hard. Despite this revealing statistics and the obvious importance of competent putting, much of the pedagogical literature is based on the observations and anecdotal evidence provided by top players and coaches (Paradisis & Rees, 2004). Therefore, the purpose of this study was to identify critical kinematic parameters of a putt by comparing putts performed by elite and novice golifers, and nongolfers. The findings might provide valuable information for improving putting performance

    Bocavirus Infection in Hospitalized Children, South Korea

    Get PDF
    This study presents the first evidence of human bocavirus infection in South Korean children. The virus was detected in 27 (8.0%) of 336 tested specimens, including 17 (7.5%) of 225 virus-negative specimens, collected from children with acute lower respiratory tract infection

    GAS AND SOLID MIXING IN A THREE PARTITIONED FLUIDIZED BED

    Get PDF
    There are many gas-solid reaction systems which take place simultaneously in a single reactor, such as coal gasification. By splitting the reactions, high concentrated gases can be obtained without separation processes. Dual fluidized bed was proposed for this purpose. Similarly, simultaneous adsorption/desorption systems with dry sorbent for CO2 capture and the gasification reaction system with a char combustor and a gasifier separately were developed. For improving gas and solid mixing efficiencies of the dual fluidized beds, a hitherto unknown partitioned fluidized bed (PFB) is proposed. A basic concept of PFB is that lower parts between two separated fluidized beds are linked (opened), whereas upper parts are blocked by walls. Solid mixing occurs in lower parts with preventing gas mixing. The solid residence time becomes longer than that of dual fluidized bed and the high conversion of solid can be obtained. In this study, the gas and the solid mixing behaviors were investigated in three partitioned fluidized beds (left, center and right). The size of each fluidized bed is 7 cm (w) X 7 cm (d) X 30 cm (h) and partitioned above the 7 cm of distributor. Air and CO2-air mixture were used as fluidizing gas in each partitioned fluidized bed. For the gas mixing experiments, glass bead particles with 150 micron and density of 2.5g/cm3 were introduced. Outlet gas concentrations of each fluidized bed were analyzed by IR and then the gas exchanges between the reactors were calculated. For the solid mixing experiments, the polypropylene particles with 1000 micron and the density of 0.883 g/cm3 were continuously fed into the reactor. The gas mixing percentages were 0.4 ~ 16.0% of input gas amounts with varying gas velocities. The solid discharge rates in center and right side can be controlled by operating conditions

    A Study of Solids and Gas Mixing in a Partitioned Fluidized Bed

    Get PDF
    A partitioned fluidized bed gasifier has been developed for improving coal gasification performance. The basic concept is to divide a fluidized bed into two parts, a gasifier and a combustor, by a partition. Char is burnt in the combustor and generated heat is supplied to the gasifier by solid mixing. Therefore, solid mixing should be maximized whereas gas mixing between syngas and the combusted gas should be minimized. In this study, gas and solid mixing behaviors were verified in cold model acrylic beds. For monitoring solid mixing behavior, transient temperature trends in the beds were analyzed. A heat source and a heat sink were installed in each bed. Dozens of thermocouples were used to monitor temperature distribution
    • …
    corecore