Relation between Obesity and Bone Mineral Density and Vertebral Fractures in Korean Postmenopausal Women

PURPOSE: The traditional belief that obesity is protective against osteoporosis has been questioned. Recent epidemiologic studies show that body fat itself may be a risk factor for osteoporosis and bone fractures. Accumulating evidence suggests that metabolic syndrome and the individual components of metabolic syndrome such as hypertension, increased triglycerides, and reduced high-density lipoprotein cholesterol are also risk factors for low bone mineral density. Using a cross sectional study design, we evaluated the associations between obesity or metabolic syndrome and bone mineral density (BMD) or vertebral fracture. MATERIALS AND METHODS: A total of 907 postmenopausal healthy female subjects, aged 60-79 years, were recruited from woman hospitals in Seoul, South Korea. BMD, vetebral fracture, bone markers, and body composition including body weight, body mass index (BMI), percentage body fat, and waist circumference were measured. RESULTS: After adjusting for age, smoking status, alcohol consumption, total calcium intake, and total energy intake, waist circumference was negatively related to BMD of all sites (lumbar BMD p = 0.037, all sites of femur BMD p < 0.001) whereas body weight was still positively related to BMD of all sites (p < 0.001). Percentage body fat and waist circumference were much higher in the fracture group than the non-fracture group (p = 0.0383, 0.082 respectively). Serum glucose levels were positively correlated to lumbar BMD (p = 0.016), femoral neck BMD (p = 0.0335), and femoral trochanter BMD (p = 0.0082). Serum high density lipoprotein cholesterol (HDLC) was positively related to femoral trochanter BMD (p = 0.0366) and was lower in the control group than the fracture group (p = 0.011). CONCLUSION: In contrast to the effect favorable body weight on bone mineral density, high percentage body fat and waist circumference are related to low BMD and a vertebral fracture. Some components of metabolic syndrome were related to BMD and a vertebral fractureope

Quaternary semiconductor Cu2FeSnS4 nanoparticles as an alternative to Pt catalysts

We demonstrate an N719 dye sensitized solar cell based on Cu 2FeSnS4 (CFTS) as a counter electrode. The elements for the material are all earth abundant and environmentally benign. The power conversion efficiency of a DSSC using CFTS was comparable to that of a DSSC using Pt under A.M. 1.5G (100 mW cm-2).close3

Impact of prior abdominal surgery on postoperative prolonged ileus after ileostomy repair

SummaryBackground and aimsPostoperative ileus (POI) is one of the most common reasons for sustained hospital stays after ileostomy repair. Although many factors have been investigated as POI risk factors, the investigation of the impact of prior abdominal surgery (PAS) before rectal cancer surgery has been limited. This study aimed to identify the impact of PAS as a risk factor for POI after ileostomy repair.Material and methodsA total of 220 consecutive patients with rectal cancer who underwent ileostomy repair were enrolled. The patients were divided into PAS-positive and PAS-negative groups according to the history of PAS before rectal cancer surgery. Univariate and multivariate analyses were performed to identify the clinicopathological factors associated with POI.ResultsThe PAS-positive group had a longer operation time (111 min vs. 93.4 min, p=0.029) and a greater length of hospital stay (10 days vs. 7.8 days, p=0.003) compared with the PAS-negative group. POI was more frequent in the PAS-positive group (23.1% vs. 6.2%, p=0.011). The POI rate in the entire cohort was 8.1%. The repair method (stapled side-to-side vs. hand-sewn end-to-end, odds ratio OR=3.6, 95% confidence interval CI=1.2–11.1, p=0.022) and PAS (odds ratio=4.0, 95% confidence interval=1.2–12.8, p=0.017) were significant predictors of POI in the multivariate analysis.ConclusionsThis study suggests that PAS before rectal cancer surgery is associated with POI after ileostomy repair

Improved Correction of Atmospheric Pressure Data Obtained by Smartphones through Machine Learning

A correction method using machine learning aims to improve the conventional linear regression (LR) based method for correction of atmospheric pressure data obtained by smartphones. The method proposed in this study conducts clustering and regression analysis with time domain classification. Data obtained in Gyeonggi-do, one of the most populous provinces in South Korea surrounding Seoul with the size of 10,000 km2, from July 2014 through December 2014, using smartphones were classified with respect to time of day (daytime or nighttime) as well as day of the week (weekday or weekend) and the user’s mobility, prior to the expectation-maximization (EM) clustering. Subsequently, the results were analyzed for comparison by applying machine learning methods such as multilayer perceptron (MLP) and support vector regression (SVR). The results showed a mean absolute error (MAE) 26% lower on average when regression analysis was performed through EM clustering compared to that obtained without EM clustering. For machine learning methods, the MAE for SVR was around 31% lower for LR and about 19% lower for MLP. It is concluded that pressure data from smartphones are as good as the ones from national automatic weather station (AWS) network

Dissociating stable nitrogen molecules under mild conditions by cyclic strain engineering

All quiet on the nitrogen front. The dissociation of stable diatomic nitrogen molecules (N-2) is one of the most challenging tasks in the scientific community and currently requires both high pressure and high temperature. Here, we demonstrate that N-2 can be dissociated under mild conditions by cyclic strain engineering. The method can be performed at a critical reaction pressure of less than 1 bar, and the temperature of the reaction container is only 40 degrees C. When graphite was used as a dissociated N* receptor, the normalized loading of N to C reached as high as 16.3 at/at %. Such efficient nitrogen dissociation is induced by the cyclic loading and unloading mechanical strain, which has the effect of altering the binding energy of N, facilitating adsorption in the strain-free stage and desorption in the compressive strain stage. Our finding may lead to opportunities for the direct synthesis of N-containing compounds from N-2

Quantification of sulcal emergence timing and its variability in early fetal life: Hemispheric asymmetry and sex difference

Human fetal brains show regionally different temporal patterns of sulcal emergence following a regular timeline, which may be associated with spatiotemporal patterns of gene expression among cortical regions. This study aims to quantify the timing of sulcal emergence and its temporal variability across typically developing fetuses by fitting a logistic curve to presence or absence of sulcus. We found that the sulcal emergence started from the central to the temporo-parieto-occipital lobes and frontal lobe, and the temporal variability of emergence in most of the sulci was similar between 1 and 2 weeks. Small variability (\u3c 1 week) was found in the left central and postcentral sulci and larger variability (\u3e2 weeks) was shown in the bilateral occipitotemporal and left superior temporal sulci. The temporal variability showed a positive correlation with the emergence timing that may be associated with differential contributions between genetic and environmental factors. Our statistical analysis revealed that the right superior temporal sulcus emerged earlier than the left. Female fetuses showed a trend of earlier sulcal emergence in the right superior temporal sulcus, lower temporal variability in the right intraparietal sulcus, and higher variability in the right precentral sulcus compared to male fetuses. Our quantitative and statistical approach quantified the temporal patterns of sulcal emergence in detail that can be a reference for assessing the normality of developing fetal gyrification

Vertical two-dimensional layered fused aromatic ladder structure

Planar two-dimensional (2D) layered materials such as graphene, metal-organic frameworks, and covalent-organic frameworks are attracting enormous interest in the scientific community because of their unique properties and potential applications. One common feature of these materials is that their building blocks (monomers) are flat and lie in planar 2D structures, with interlayer -pi stacking, parallel to the stacking direction. Due to layer-to-layer confinement, their segmental motion is very restricted, which affects their sorption/desorption kinetics when used as sorbent materials. Here, to minimize this confinement, a vertical 2D layered material was designed and synthesized, with a robust fused aromatic ladder (FAL) structure. Because of its unique structural nature, the vertical 2D layered FAL structure has excellent gas uptake performance under both low and high pressures, and also a high iodine (I-2) uptake capacity with unusually fast kinetics, the fastest among reported porous organic materials to date. Stacking of planar layers composed of flat building blocks in two dimensional materials results in restriction of segmental motion which affects their typical properties, such as sorption or desorption. Here, the authors minimize this confinement using a vertically-stacked fused aromatic ladder structure and demonstrate excellent gas uptake under low and high pressure

Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes.

Organic-inorganic hybrid perovskites are emerging low-cost emitters with very high color purity, but their low luminescent efficiency is a critical drawback. We boosted the current efficiency (CE) of perovskite light-emitting diodes with a simple bilayer structure to 42.9 candela per ampere, similar to the CE of phosphorescent organic light-emitting diodes, with two modifications: We prevented the formation of metallic lead (Pb) atoms that cause strong exciton quenching through a small increase in methylammonium bromide (MABr) molar proportion, and we spatially confined the exciton in uniform MAPbBr3 nanograins (average diameter = 99.7 nanometers) formed by a nanocrystal pinning process and concomitant reduction of exciton diffusion length to 67 nanometers. These changes caused substantial increases in steady-state photoluminescence intensity and efficiency of MAPbBr3 nanograin layers.This work was partially supported by Samsung Research Funding Center of Samsung Electronics under Project Number SRFC-MA-1402-07. A.S. was partially supported by the Engineering and Physical Sciences Research Council (UK).This is the author accepted manuscript. It is currently under an indefinite embargo pending publication by the American Association for the Advancement of Science

Characterization of canine oral papillomavirus by histopathological and genetic analysis in Korea

In August 2008, forty dogs out of 400 developed oral warts in a breeding farm in Korea. Canine oral papilloma infection is a common disease in dogs. However, there has been no report of an outbreak of canine oral papillomavirus (COPV) in a group of dogs or in dog breeding farms in Korea, and the genetic analysis of COPV in Korea has yet to be performed. This study diagnosed canine oral papilloma from the oral samples of these dogs based on histopathological examination and immunohistochemistry. Polymerase chain reaction was applied to amplify the corresponding products using pre-existing primer sets for COPV and a universal human papillomavirus targeting L1 gene. Further genetic analysis of the major viral capsid gene L1 confirms the sequences of Korean COPV, which shows a close relationship to previously reported COPV. This study describes the histopathological and immunohistochemical characteristics of canine oral papilloma in a group of breeding dogs in Korea and discloses the complete L1 gene sequences of Korean COPV