High-Resolution Magnetic Force Microscopy Using Carbon Nanotube Probes Fabricated Directly by Microwave Plasma-Enhanced Chemical Vapor Deposition

Carbon nanotubes (CNTs) have been successfully grown on the tip apex of an atomic force microscopy (AFM) cantilever by microwave plasma-enhanced chemical vapor deposition (MPECVD). Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) observations reveal that the diameter of the CNTs is ∼30 nm and the magnetic particles with diameter of ∼20 nm, which was used as catalyst for the CNT growth, exist on the top. This CNT probe has been applied to magnetic force microscopy (MFM) on the ultrahigh-density magnetic recording media with 1200 kilo flux change per inch (kfci)

Tailoring Carbon Nanostructure for High Frequency Supercapacitor Operation

The possibility of enhancing the frequency performance of electrochemical capacitors by tailoring the nanostructure of the carbon electrode to increase electrolyte permeability is demonstrated. Highly porous, vertically oriented carbon electrodes which are in direct electrical contact with the metallic current collector are produced via MPECVD growth on metal foils. The resulting structure has a capacitance and frequency performance between that of an electrolytic capacitor and an electrochemical capacitor. Fully packaged devices are produced on Ni and Cu current collectors and performance compared to state-of-the-art electrochemical capacitors and electrolytic capacitors. The extension of capacitive behavior to the AC regime (~100 Hz) opens up an avenue for a number of new applications where physical volume of the capacitor may be significantly reduced

Growth of Pd-Filled Carbon Nanotubes on the Tip of Scanning Probe Microscopy

We have synthesized Pd-filled carbon nanotubes (CNTs) oriented perpendicular to Si substrates using a microwave plasma-enhanced chemical vapor deposition (MPECVD) for the application of scanning probe microscopy (SPM) tip. Prior to the CVD growth, Al thin film (10 nm) was coated on the substrate as a buffer layer followed by depositing a 5∼40 nm-thick Pd film as a catalyst. The diameter and areal density of CNTs grown depend largely on the initial Pd thickness. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images clearly show that Pd is successfully encapsulated into the CNTs, probably leading to higher conductivity. Using optimum growth conditions, Pd-filled CNTs are successfully grown on the apex of the conventional SPM cantilever

Angstrom‐confined Electrochemical Synthesis of Sub‐unit Cell non van der Waals 2D Metal Oxides

Bottom-up electrochemical synthesis of atomically thin materials is desirable yet challenging, especially for non-van der Waals (vdW) materials. Thicknesses below few nm have not been reported yet, posing the question how thin can non-vdW materials be electrochemically synthesized? This is important as materials with (sub-) unit cell thickness often show remarkably different properties compared to their bulk form or thin films of several nm thickness. Here, we introduce a straightforward electrochemical method utilizing the angstrom-confinement of laminar reduced graphene oxide (rGO) nanochannels to obtain a centimeter-scale network of atomically thin (< 4.3 Å) 2D-transition metal oxides (2D-TMO). The angstrom-confinement provides a thickness limitation, forcing sub-unit cell growth of 2D-TMO with oxygen and metal vacancies. We showcase that Cr2O3, a material without significant catalytic activity for OER in bulk form, can be activated as a high-performing catalyst if synthesized in the 2D sub-unit cell form. Our method displays the high activity of sub-unit cell form while retaining the stability of bulk form, promising to yield unexplored fundamental science and applications. We show that while retaining the advantages of bottom-up electrochemical synthesis like simplicity, high yield, and mild conditions, the thickness of TMO can be limited to sub-unit cell dimensions

Enhanced graphitic domains of unreduced graphene oxide and the interplay of hydration behaviour and catalytic activity

Previous studies indicate that the properties of graphene oxide (GO) can be significantly improved by enhancing its graphitic domain size through thermal diffusion and clustering of functional groups. Remarkably, this transition takes place below the decomposition temperature of the functional groups and thus allows fine-tuning of graphitic domains without compromising with the functionality of GO. By studying the transformation of GO under mild thermal treatment, we directly observe this size enhancement of graphitic domains from originally 40 nm2 to 200 nm2 through an extensive transmission electron microscopy (TEM) study. Additionally, we confirm the integrity of the functional groups during this process by comprehensive chemical analysis. A closer look into the process confirms the theoretically predicted relevance for the room temperature stability of GO. We further investigate the influence of enlarged graphitic domains on the hydration behaviour of GO and catalytic performance of single-atom catalysts supported by GO. Surprisingly, both, the water transport and catalytic activity are damped by the heat treatment. This allows us to reveal the critical role of water transport in laminated 2D materials as catalysts

DOCK2 is involved in the host genetics and biology of severe COVID-19

「コロナ制圧タスクフォース」COVID-19疾患感受性遺伝子DOCK2の重症化機序を解明 --アジア最大のバイオレポジトリーでCOVID-19の治療標的を発見--. 京都大学プレスリリース. 2022-08-10.Identifying the host genetic factors underlying severe COVID-19 is an emerging challenge. Here we conducted a genome-wide association study (GWAS) involving 2, 393 cases of COVID-19 in a cohort of Japanese individuals collected during the initial waves of the pandemic, with 3, 289 unaffected controls. We identified a variant on chromosome 5 at 5q35 (rs60200309-A), close to the dedicator of cytokinesis 2 gene (DOCK2), which was associated with severe COVID-19 in patients less than 65 years of age. This risk allele was prevalent in East Asian individuals but rare in Europeans, highlighting the value of genome-wide association studies in non-European populations. RNA-sequencing analysis of 473 bulk peripheral blood samples identified decreased expression of DOCK2 associated with the risk allele in these younger patients. DOCK2 expression was suppressed in patients with severe cases of COVID-19. Single-cell RNA-sequencing analysis (n = 61 individuals) identified cell-type-specific downregulation of DOCK2 and a COVID-19-specific decreasing effect of the risk allele on DOCK2 expression in non-classical monocytes. Immunohistochemistry of lung specimens from patients with severe COVID-19 pneumonia showed suppressed DOCK2 expression. Moreover, inhibition of DOCK2 function with CPYPP increased the severity of pneumonia in a Syrian hamster model of SARS-CoV-2 infection, characterized by weight loss, lung oedema, enhanced viral loads, impaired macrophage recruitment and dysregulated type I interferon responses. We conclude that DOCK2 has an important role in the host immune response to SARS-CoV-2 infection and the development of severe COVID-19, and could be further explored as a potential biomarker and/or therapeutic target