Study on Micro-Displacement Mechanism and Reservoir Compatibility of Soft Dispersed Microgel

Polymer flooding is a key technology for improving reservoir heterogeneity around the world, and it has made great progress. However, the traditional polymer has many shortcomings in the theory and application, which causes the efficiency of polymer flooding to gradually decrease and secondary reservoir damage after a long period of polymer flooding. In this work, a novel polymer particle (soft dispersed microgel, SMG) is used as the research object to further investigate the displacement mechanism and reservoir compatibility of SMG. The visualization experiments of the micro-model prove that SMG has excellent flexibility and can be highly deformable to realize deep migration through the pore throat smaller than SMG itself. The visualization displacement experiments of the plane model further show that SMG has a plugging effect, which makes the displacing fluid flow into the middle and low permeability layers, improving the recovery of these layers. The compatibility tests show that the optimal permeability of the reservoir for SMG-μm is 250–2000 mD, and the corresponding matching coefficient range is 0.65–1.40. For SMG-mm−, its corresponding optimal permeabilities of reservoir and matching coefficient are 500–2500 mD and 1.17–2.07, respectively. The comprehensive analysis demonstrates that the SMG has excellent ability of the water-flooding swept control and compatibility with reservoirs, having the potential to solve the problem of traditional polymer flooding

Numerical Simulation of Low-Permeability Reservoirs with considering the Dynamic Boundary Layer Effect

Surface active components, salt component, and polar molecules in the fluid may adsorb on the solid surface and form the boundary layer during low-speed flow in a porous medium, which will influence the flowing law in the porous medium. Previous studies on flowing in low-permeability reservoirs mainly focus on the effects of the threshold pressure gradient. But few of them have considered the time-varying effect of the boundary layer thickness in solving the numerical simulation. The correlation among the boundary layer thickness and pressure gradient was established by regressing the experimental data of boundary thickness versus pressure. On this basis, the mathematical model of oil-water two-phase flow which involves influence of the boundary layer was constructed, and the comparative analysis of the development effect is performed. Results demonstrated that the boundary layer thickness is sensitive to the throat radius and pressure gradient, and the boundary layer thickness decreases dynamically with the increase of pressure gradient. The displacement velocity and accumulative oil production with boundary layer effect decrease when comparing with that without the boundary layer effect. Meanwhile, the boundary layer accelerates the breakthrough of water. With the reduction of production pressure difference, the difference between accumulative oil production with and without the boundary layer effect increases, which indicate that the dynamic effect of the boundary layer is intensified

Magnetic Solid-Phase Extraction Based on β-Cyclodextrins/Acrylic Acid Modified Magnetic Gelatin for Determination of Moxidectin in Milk Samples

β-Cyclodextrins/acrylic acid modified magnetic gelatin was prepared and then employed as the magnetic solid-phase extraction (MSPE) sorbent for extraction of moxidectin in milk samples. Due to the rigidity of hydrophobic cavity of β-cyclodextrins and carboxyl groups of acrylic acid, magnetic composites are prepared to form a complex with target molecules through various kinds of chemical reactions and then showed excellent extraction performance. This method exhibits the advantages of simplicity of implementation, short extraction time (5 min), low solvent consumption, and high extraction efficiency. A rapid, simple, and effective method for the analysis of moxidectin in milk samples was established by MSPE coupled with liquid chromatography-fluorescence detection. The limit of detection was 0.1 ng·mL−1 and the recoveries from milk samples were in the range of 93.8%–112.5%. The relative standard deviation was not higher than 6.4%. In conclusion, magnetic solid-phase extraction is a simple and robust preconcentration technique that can be coupled to other analytical methods for the quantitative determination of target molecules in complex samples

Research on Adaptability Evaluation Method of Polymer by Nuclear Magnetic Resonance Technology

In order to study the matching relationship between polymer(HPAM) molecular weight and reservoir permeability, in this paper, the injection performance of polymers with different molecular weights in rock cores with different permeability is studied. Using nuclear magnetic resonance technology combined with conventional core displacement equipment, the change law of the displacement process was analyzed from three aspects of nuclear magnetic resonance T2 spectrum, core layering, and imaging. Finally, the fluidity of the polymer solution in the core was analyzed by injection pressure control features. The experimental results show that the polymer solution with a molecular weight of 25 million has the best retention effect in the core flooding experiment and can stay in the dominant channel of the core for a long time to control the water flooding mobility. In rocks with a permeability of 500, 1000, and 2000 mD, subsequent water flooding can expand the swept volume by about 25% compared with polymer flooding. This method can effectively establish the adaptability matching relationship between the polymer molecular weight and the reservoir permeability

Experimental Investigation on a Novel Particle Polymer for Enhanced Oil Recovery in High Temperature and High Salinity Reservoirs

Conventional polymer flooding include polymer flooding, surfactant-polymer flooding (SP), alkaline-surfactant-polymer flooding (ASP), and crosslinked polymer gel flooding. However, these technologies in oilfield, especially in high temperature and high salinity, are limited due to the poor ability of temperature and salinity resistance of polymer. In this work, a novel polymer particle (soft microgel, SMG) is used as the research object under the reservoir condition of high salinity (20 × 104 mg/L) to evaluate the physical and chemical properties of submillimeter-scale SMG and the effect of profile control and oil displacement. The investigation of the physical and chemical properties of submillimeter-scale SMG shows that it has the characteristics of low viscosity, easy injection, good plugging property, swelling property, rheological property, and excellent thermal stability. After 6 months of high temperature and high salinity aging, there is no hydration and hydrolysis of submillimeter-scale SMG as the traditional polymers under high temperature and high salinity. The parallel two-core flooding experiments indicate that the submillimeter-scale SMG has a better effect of profile control and oil displacement, which increases the fraction flow rate(fw) of low-permeability core from 5.12% before SMG-flooding to 85.29% and the total increase of recovery as high as 14.07%. The comprehensive analysis demonstrates that the submillimeter-scale SMG has the potential to solve the problem that the polymer flooding cannot be applied to the high temperature and high salinity reservoir, and it is also expected to improve the uneven waterflooding in the reservoir

Image_1_Allicin shows antifungal efficacy against Cryptococcus neoformans by blocking the fungal cell membrane.TIF

Allicin, which is generated by the catalytic reaction between alliin and alliinase extracted from garlic, has been shown to have a wide range of antimicrobial activities, but its anti-Cryptococcus efficacy and mechanism are not quite clear. Here, we have determined that the Conversion rate of allicin in the reaction product reached 97.5%. The minimal inhibitory concentration (MIC) of allicin against Cryptococcus neoformans (C. neoformans) H99 was 2 μg/ml, which is comparable to fluconazole (FLU, 1 μg/ml). Furthermore, allicin exhibited effective antifungal activity against 46 clinical isolates of C. neoformans, and the MICs ranged from 1 to 8 μg/ml, even for AmB-insensitive strains. Interestingly, allicin also exerted additive or synergistic effects when combined with amphotericin B (AmB) and FLU. Time-killing curves and long-term live cell imaging of H99 showed that 4 MIC of allicin had fungicide activity. Additionally, allicin (4 and 8 mg/kg) exerted a dose-dependent therapeutic effect on H99-infected mice by significantly reducing the wet pulmonary coefficient and Cryptococcus load and reducing lung damage. Even the efficacy of 8 mg/kg was comparable to FLU (20 mg/kg). Transcriptomics revealed that allicin may act on the cell membrane of H99. Subsequently, transmission electron microscopy (TEM) observations showed that allicin clearly breached the cell membrane and organelles of H99. Confocal laser scanning microscopy (CLSM) results further confirmed that allicin disrupted the permeability of the cell membranes of H99 in a dose-dependent manner. Allicin exhibits strong anti-C. neoformans activity in vitro and in vivo, mainly by destroying the permeability and related functions of Cryptococcus cell membranes.</p

Video_2_Allicin shows antifungal efficacy against Cryptococcus neoformans by blocking the fungal cell membrane.AVI

Allicin, which is generated by the catalytic reaction between alliin and alliinase extracted from garlic, has been shown to have a wide range of antimicrobial activities, but its anti-Cryptococcus efficacy and mechanism are not quite clear. Here, we have determined that the Conversion rate of allicin in the reaction product reached 97.5%. The minimal inhibitory concentration (MIC) of allicin against Cryptococcus neoformans (C. neoformans) H99 was 2 μg/ml, which is comparable to fluconazole (FLU, 1 μg/ml). Furthermore, allicin exhibited effective antifungal activity against 46 clinical isolates of C. neoformans, and the MICs ranged from 1 to 8 μg/ml, even for AmB-insensitive strains. Interestingly, allicin also exerted additive or synergistic effects when combined with amphotericin B (AmB) and FLU. Time-killing curves and long-term live cell imaging of H99 showed that 4 MIC of allicin had fungicide activity. Additionally, allicin (4 and 8 mg/kg) exerted a dose-dependent therapeutic effect on H99-infected mice by significantly reducing the wet pulmonary coefficient and Cryptococcus load and reducing lung damage. Even the efficacy of 8 mg/kg was comparable to FLU (20 mg/kg). Transcriptomics revealed that allicin may act on the cell membrane of H99. Subsequently, transmission electron microscopy (TEM) observations showed that allicin clearly breached the cell membrane and organelles of H99. Confocal laser scanning microscopy (CLSM) results further confirmed that allicin disrupted the permeability of the cell membranes of H99 in a dose-dependent manner. Allicin exhibits strong anti-C. neoformans activity in vitro and in vivo, mainly by destroying the permeability and related functions of Cryptococcus cell membranes.</p

Table_3_Allicin shows antifungal efficacy against Cryptococcus neoformans by blocking the fungal cell membrane.DOCX

Allicin, which is generated by the catalytic reaction between alliin and alliinase extracted from garlic, has been shown to have a wide range of antimicrobial activities, but its anti-Cryptococcus efficacy and mechanism are not quite clear. Here, we have determined that the Conversion rate of allicin in the reaction product reached 97.5%. The minimal inhibitory concentration (MIC) of allicin against Cryptococcus neoformans (C. neoformans) H99 was 2 μg/ml, which is comparable to fluconazole (FLU, 1 μg/ml). Furthermore, allicin exhibited effective antifungal activity against 46 clinical isolates of C. neoformans, and the MICs ranged from 1 to 8 μg/ml, even for AmB-insensitive strains. Interestingly, allicin also exerted additive or synergistic effects when combined with amphotericin B (AmB) and FLU. Time-killing curves and long-term live cell imaging of H99 showed that 4 MIC of allicin had fungicide activity. Additionally, allicin (4 and 8 mg/kg) exerted a dose-dependent therapeutic effect on H99-infected mice by significantly reducing the wet pulmonary coefficient and Cryptococcus load and reducing lung damage. Even the efficacy of 8 mg/kg was comparable to FLU (20 mg/kg). Transcriptomics revealed that allicin may act on the cell membrane of H99. Subsequently, transmission electron microscopy (TEM) observations showed that allicin clearly breached the cell membrane and organelles of H99. Confocal laser scanning microscopy (CLSM) results further confirmed that allicin disrupted the permeability of the cell membranes of H99 in a dose-dependent manner. Allicin exhibits strong anti-C. neoformans activity in vitro and in vivo, mainly by destroying the permeability and related functions of Cryptococcus cell membranes.</p