Guided wave based methods for damage detection : experimental study on concrete joint

Since Guided wave (GW) is sensitive to small damage and can propagate a relatively longer distance with relatively less attenuation, GW-based method has been found as an effective and efficient way to detect incipient damages. In this study, a full-scale concrete joint was constructed to further verify the effectiveness of GW-based method on real civil structures. GW tests were conducted in three stages, including baseline, serviceability and damage conditions. The waves are excited by one actuator and received by several sensors, which are made up of independent piezoelectric elements. Experimental results show that the mehod is promising for damage identification in practices

Damage identification scheme based on compressive sensing

Civil infrastructures are critical to every nation, due to their substantial investment, long service period, and enormous negative impacts after failure. However, they inevitably deteriorate during their service lives. Therefore, methods capable of assessing conditions and identifying damage in a structure timely and accurately have drawn increasing attention. Recently, compressive sensing (CS), a significant breakthrough in signal processing, has been proposed to capture and represent compressible signals at a rate significantly below the traditional Nyquist rate. Due to its sound theoretical background and notable influence, this methodology has been successfully applied in many research areas. In order to explore its application in structural damage identification, a new CS-based damage identification scheme is proposed in this paper, by regarding damage identification problems as pattern classification problems. The time domain structural responses are transferred to the frequency domain as sparse representation, and then the numerical simulated data under various damage scenarios will be used to train a feature matrix as input information.This matrix can be used for damage identification through an optimization process. This will be one of the first few applications of this advanced technique to structural engineering areas. In order to demonstrate its effectiveness, numerical simulation results on a complex pipe soil interaction model are used to train the parameters and then to identify the simulated pipe degradation damage and free-spanning damage. To further demonstrate the method, vibration tests of a steel pipe laid on the ground are carried out. The measured acceleration time histories are used for damage identification. Both numerical and experimental verification results confirm that the proposed damage identification scheme will be a promising tool for structural health monitoring

Multi-microjoule GaSe-based mid-infrared optical parametric amplifier with an ultra-broad idler spectrum covering 4.2-16 {\mu}m

We report a multi-microjoule, ultra-broadband mid-infrared optical parametric amplifier based on a GaSe nonlinear crystal pumped at ~2 {\mu}m. The generated idler pulse has a flat spectrum spanning from 4.5 to 13.3 {\mu}m at -3 dB and 4.2 to 16 {\mu}m in the full spectral range, with a central wavelength of 8.8 {\mu}m. The proposed scheme supports a sub-cycle Fourier-transform-limited pulse width. A (2+1)-dimensional numerical simulation is employed to reproduce the obtained idler spectrum. To our best knowledge, this is the broadest -3 dB spectrum ever obtained by optical parametric amplifiers in this spectral region. The idler pulse energy is ~3.4 {\mu}J with a conversion efficiency of ~2% from the ~2 {\mu}m pump to the idler pulse.Comment: 5 pages, 5 figure

Mean Shift-Based Mobile Localization Method in Mixed LOS/NLOS Environments for Wireless Sensor Network

Mobile localization estimation is a significant research topic in the fields of wireless sensor network (WSN), which is of concern greatly in the past decades. Non-line-of-sight (NLOS) propagation seriously decreases the positioning accuracy if it is not considered when the mobile localization algorithm is designed. NLOS propagation has been a serious challenge. This paper presents a novel mobile localization method in order to overcome the effects of NLOS errors by utilizing the mean shift-based Kalman filter. The binary hypothesis is firstly carried out to detect the measurements which contain the NLOS errors. For NLOS propagation condition, mean shift algorithm is utilized to evaluate the means of the NLOS measurements and the data association method is proposed to mitigate the NLOS errors. Simulation results show that the proposed method can provide higher location accuracy in comparison with some traditional methods

Relationship between Successive Flares in the Same Active Region and Space-Weather HMI Active Region Patch (SHARP) Parameters

A solar active region (AR) may produce multiple notable flares during its passage across the solar disk. We investigate successive flares from flare-eruptive active regions, and explore their relationship with solar magnetic parameters. We examine six ARs in this study, each with at least one major flare above X1.0. The Space-Weather HMI Active Region Patch (SHARP) is employed in this study to parameterize the ARs. We aim to identify the most flare-related SHARP parameters and lay foundation for future practical flare forecasts. We first evaluate the correlation coefficients between the SHARP parameters and the successive flare production. Then we adopt a Natural Gradient Boost (NGBoost) method to analyze the relationship between the SHARP parameters and the successive flare bursts. Based on the correlation analysis and the importance distribution returned from NGBoost, we select 8 most flare-related SHARP parameters. Finally, we discuss the physical meanings of the 8 selected parameters and their relationship with flare production.Comment: 18 pages; 9 figures; Accepted for publication in Ap