7,008 research outputs found

    Nonlinear soil-structure interaction calculations simulating the SIMQUAKE experiment using STEALTH 2D

    Get PDF
    Transient, nonlinear soil-structure interaction simulations of an Electric Power Research Institute, SIMQUAKE experiment were performed using the large strain, time domain STEALTH 2D code and a cyclic, kinematically hardening cap soil model. Results from the STEALTH simulations were compared to identical simulations performed with the TRANAL code and indicate relatively good agreement between all the STEALTH and TRANAL calculations. The differences that are seen can probably be attributed to: (1) large (STEALTH) vs. small (TRANAL) strain formulation and/or (2) grid discretization differences

    Study of geopotential error models used in orbit determination error analysis

    Get PDF
    The uncertainty in the geopotential model is currently one of the major error sources in the orbit determination of low-altitude Earth-orbiting spacecraft. The results of an investigation of different geopotential error models and modeling approaches currently used for operational orbit error analysis support at the Goddard Space Flight Center (GSFC) are presented, with emphasis placed on sequential orbit error analysis using a Kalman filtering algorithm. Several geopotential models, known as the Goddard Earth Models (GEMs), were developed and used at GSFC for orbit determination. The errors in the geopotential models arise from the truncation errors that result from the omission of higher order terms (omission errors) and the errors in the spherical harmonic coefficients themselves (commission errors). At GSFC, two error modeling approaches were operationally used to analyze the effects of geopotential uncertainties on the accuracy of spacecraft orbit determination - the lumped error modeling and uncorrelated error modeling. The lumped error modeling approach computes the orbit determination errors on the basis of either the calibrated standard deviations of a geopotential model's coefficients or the weighted difference between two independently derived geopotential models. The uncorrelated error modeling approach treats the errors in the individual spherical harmonic components as uncorrelated error sources and computes the aggregate effect using a combination of individual coefficient effects. This study assesses the reasonableness of the two error modeling approaches in terms of global error distribution characteristics and orbit error analysis results. Specifically, this study presents the global distribution of geopotential acceleration errors for several gravity error models and assesses the orbit determination errors resulting from these error models for three types of spacecraft - the Gamma Ray Observatory, the Ocean Topography Experiment, and the Cosmic Background Explorer

    Realistic Magnetohydrodynamical Simulation of Solar Local Supergranulation

    Full text link
    Three-dimensional numerical simulations of solar surface magnetoconvection using realistic model physics are conducted. The thermal structure of convective motions into the upper radiative layers of the photosphere, the main scales of convective cells and the penetration depths of convection are investigated. We take part of the solar photosphere with size of 60x60 Mm in horizontal direction and by depth 20 Mm from level of the visible solar surface. We use a realistic initial model of the Sun and apply equation of state and opacities of stellar matter. The equations of fully compressible radiation magnetohydrodynamics with dynamical viscosity and gravity are solved. We apply: 1) conservative TVD difference scheme for the magnetohydrodynamics, 2) the diffusion approximation for the radiative transfer, 3) dynamical viscosity from subgrid scale modeling. In simulation we take uniform two-dimesional grid in gorizontal plane and nonuniform grid in vertical direction with number of cells 600x600x204. We use 512 processors with distributed memory multiprocessors on supercomputer MVS-100k in the Joint Computational Centre of the Russian Academy of Sciences.Comment: 6 pages, 5 figures, submitted to the proceedings of the GONG 2008 / SOHO XXI conferenc

    Getting published: group support for academic librarians

    Get PDF
    Purpose - The purpose of this paper is to offer an effective model for increasing professionals' competence, enthusiasm and success in writing and publishing. Design/methodology/approach - Recent articles on writing groups in the field of library and information science are reviewed and a case study of a group at RMIT University Library is presented. The authors were the facilitator and group members who were librarians, most with relative inexperience in research, writing, presenting, and getting published. A self-rating confidence survey was created to establish developmental priorities which were then addressed through input from experts, practical application and reflection, and constructive advice and support from group members. Group effectiveness and outcomes were evaluated at mid- and end-point review meetings, through a post-intervention confidence survey and by tracking publication output. Findings - The group became a cohesive, task-focused and productive team. A post-intervention confidence survey evidenced improvements on all survey items at a team level. Each member affirmed that they had gained substantial knowledge of writing, presentation and research techniques and understanding of the publication process. Publication output increased over the benchmark year of 2010, and in 2011 and 2012 exceeded initial targets. Practical implications - The model presented offers a practical and effective approach to increasing competence and output in writing, presenting, research, and getting published and can be easily adopted by others. Originality/value - Most literature reviews on library professional writing groups relate to professionals required to publish. The Get Published Group comprised Australian librarians writing voluntarily

    The Luminosity Function of Field Galaxies in the CNOC1 Redshift Survey

    Get PDF
    We have computed the luminosity function for 389 field galaxies from the Canadian Network for Observational Cosmology cluster redshift survey (CNOC1), over redshifts z = 0.2-0.6. We find Schechter parameters M^* - 5 log h = -19.6 \pm 0.3 and \alpha = -0.9 \pm 0.2 in rest-frame B_{AB}. We have also split our sample at the color of a redshifted but nonevolving Sbc galaxy, and find distinctly different luminosity functions for red and blue galaxies. Red galaxies have a shallow slope \alpha \approx -0.4 and dominate the bright end of the luminosity function, while blue galaxies have a steep \alpha \approx -1.4 and prevail at the faint end. Comparisons of the CNOC1 results to those from the Canada-France (CFRS) and Autofib redshift surveys show broad agreement among these independent samples, but there are also significant differences which will require larger samples to resolve. Also, in CNOC1 the red galaxy luminosity density stays about the same over the range z = 0.2-0.6, while the blue galaxy luminosity density increases steadily with redshift. These results are consistent with the trend of the luminosity density vs. redshift relations seen in the CFRS, though the normalizations of the luminosity densities appear to differ for blue galaxies. Comparison to the local luminosity function from the Las Campanas redshift survey (LCRS) shows that the luminosity density at z \approx 0.1 is only about half that seen at z \approx 0.4. A change in the luminosity function shape, particularly at the faint end, appears to be required to match the CNOC1 and LCRS luminosity functions, if galaxy evolution is the sole cause of the differences seen. However, it should be noted that the specific details of the construction of different surveys may complicate the comparison of results and so may need to be considered carefully.Comment: 22 pages, including 6 postscript figures, uses AASTEX v4.0 style files. Corrected minor typos and updated references. Results and conclusions unchanged. Final version to appear in the Astrophysical Journa

    Constraints on Omega_m and sigma_8 from weak lensing in RCS fields

    Full text link
    We have analysed 53 square degrees of imaging data from the Red-Sequence Cluster Survey (RCS), and measured the excess correlations in the shapes of galaxies on scales out to ~1.5 degrees. We separate the signal into an ``E''- (lensing) and ``B''-mode (systematics), which allows us to study residual systematics. On scales larger than 10 arcminutes, we find no ``B''-mode. On smaller scales we find a small, but significant ``B''-mode. This signal is also present when we select a sample of bright galaxies. These galaxies are rather insensitive to observational distortions, and we therefore conclude that the oberved ``B''-mode is likely to be caused by intrinsic alignments. We therefore limit the cosmic shear analysis to galaxies with 22<R_C<24. We derive joint constraints on Omega_m and sigma_8, by marginalizing over Gamma, Omega_Lambda and the source redshift distribution, using different priors. We obtain a conservative constraint of σ8=0.450.12+0.09Ωm0.55\sigma_8=0.45^{+0.09}_{-0.12} \Omega_m^{-0.55} (95% confidence). A better constraint is derived when we use Gaussian priors redshift distribution. For this choice of priors, we find σ8=(0.460.07+0.05)Ωm0.52\sigma_8=(0.46^{+0.05}_{-0.07})\Omega_m^{-0.52} (95% confidence). Using our setof Gaussian priors, we find that we can place a lower bound on Gamma: Gamma>0.1+0.16\Omega_m$ (95% confidence). Comparison of the RCS results with three other recent cosmic shear measurements shows excellent agreement. The current weak lensing results are also in good agreement with CMB measurements, when we allow the reionization optical depth tau and the spectral index n_s to vary. We present a simple demonstration of how the weak lensing results can be used as a prior in the parameter estimation from CMB measurements to derive constraints on the reionization optical depth tau. (abridged)Comment: 9 pages, 6 figures, Accepted for publication in the Astrophysical Journa

    Chemical aging of m-xylene secondary organic aerosol: laboratory chamber study

    Get PDF
    Secondary organic aerosol (SOA) can reside in the atmosphere for a week or more. While its initial formation from the gas-phase oxidation of volatile organic compounds tends to take place in the first few hours after emission, SOA can continue to evolve chemically over its atmospheric lifetime. Simulating this chemical aging over an extended time in the laboratory has proven to be challenging. We present here a procedure for studying SOA aging in laboratory chambers that is applied to achieve 36 h of oxidation. The formation and evolution of SOA from the photooxidation of m-xylene under low-NO_x conditions and in the presence of either neutral or acidic seed particles is studied. In SOA aging, increasing molecular functionalization leads to less volatile products and an increase in SOA mass, whereas gas- or particle-phase fragmentation chemistry results in more volatile products and a loss of SOA. The challenge is to discern from measured chamber variables the extent to which these processes are important for a given SOA system. In the experiments conducted, m-xylene SOA mass, calculated under the assumption of size-invariant particle composition, increased over the initial 12–13 h of photooxidation and decreased beyond that time, suggesting the existence of fragmentation chemistry. The oxidation of the SOA, as manifested in the O:C elemental ratio and fraction of organic ion detected at m/z 44 measured by the Aerodyne aerosol mass spectrometer, increased continuously starting after 5 h of irradiation until the 36 h termination. This behavior is consistent with an initial period in which, as the mass of SOA increases, products of higher volatility partition to the aerosol phase, followed by an aging period in which gas- and particle-phase reaction products become increasingly more oxidized. When irradiation is stopped 12.4 h into one experiment, and OH generation ceases, minimal loss of SOA is observed, indicating that the loss of SOA is either light- or OH-induced. Chemical ionization mass spectrometry measurements of low-volatility m-xylene oxidation products exhibit behavior indicative of continuous photooxidation chemistry. A condensed chemical mechanism of m-xylene oxidation under low-NO_x conditions is capable of reproducing the general behavior of gas-phase evolution observed here. Moreover, order of magnitude analysis of the mechanism suggests that gas-phase OH reaction of low volatility SOA precursors is the dominant pathway of aging in the m-xylene system although OH reaction with particle surfaces cannot be ruled out. Finally, the effect of size-dependent particle composition and size-dependent particle wall loss rates on different particle wall loss correction methods is discussed

    Properties of galaxy dark matter halos from weak lensing

    Full text link
    We present the results of a study of weak lensing by galaxies based on 45.5 deg2^2 of RCR_C band imaging data from the Red-Sequence Cluster Survey (RCS). We present the first weak lensing detection of the flattening of galaxy dark matter halos. We use a simple model in which the ellipticity of the halo is ff times the observed ellipticity of the lens. We find a best fit value of f=0.770.21+0.18f=0.77^{+0.18}_{-0.21}, suggesting that the dark matter halos are somewhat rounder than the light distribution. The fact that we detect a significant flattening implies that the halos are well aligned with the light distribution. Given the average ellipticity of the lenses, this implies a halo ellipticity of =0.330.09+0.07=0.33^{+0.07}_{-0.09}, in fair agreement with results from numerical simulations of CDM. This result provides strong support for the existence of dark matter, as an isotropic lensing signal is excluded with 99.5% confidence. We also study the average mass profile around the lenses, using a maximum likelihood analysis. We consider two models for the halo mass profile: a truncated isothermal sphere (TIS) and an NFW profile. We adopt observationally motivated scaling relations between the lens luminosity and the velocity dispersion and the extent of the halo. The best fit NFW model yields a mass M200=(8.4±0.7±0.4)×1011h1MM_{200}=(8.4\pm0.7\pm0.4)\times 10^{11} h^{-1} M_\odot and a scale radius rs=16.22.9+3.6h1r_s=16.2^{+3.6}_{-2.9} h^{-1} kpc. This value for the scale radius is in excellent agreement with predictions from numerical simulations for a halo of this mass.Comment: Significantly revised version, accepted for publication in ApJ 11 pages, 6 figure
    corecore