{Bis[2-(diphenyl­phosphan­yl)eth­yl]phenyl­phosphane-κ3 P,P′,P′′}[(Z)-8-mesityl­cyclo­oct-4-en-1-yl]platinum(II) tetra­fluorido­borate dichloro­methane disolvate

In the title ionic compound, [Pt(C17H23)(C34H33P3)](BF4)·2CH2Cl2, the PtII atom adopts a square-planar coordination geometry with the large (Z)-8-mesityl­cyclo­oct-4-en-1-yl group occupying the fourth coordination site. The (triphos)Pt moiety and the mesityl group are attached to the cyclo­oct-4-ene motif at the 1- and 8-position in a syn configuration. The (BF4)− anion and one of the dichloromethane solvate molecules each are disordered over two sets of sites

Laves-phase evolution during aging in fine grained heat-affected zone of a tungsten-strengthened 9% Cr steel weldment

The precipitation and coarsening of Laves-phase in the fine grained heat-affected zone (FGHAZ) of a 9% Cr steel P92 welded joint during thermal aging at 923 K were investigated and compared to the base metal (BM), in order to clarify their effects on the Type IV fracture. Laves-phase precipitated mostly on the prior austenite grain boundaries of the FGHAZ. In comparison with BM, FGHAZ contained more grain boundary areas and can provide more nucleation sites for Laves-phase, resulting in an accelerated precipitation and rapidly reaching to the around 1.0% of saturated volume fraction. The coarsening of Laves-phase precipitates in FGHAZ was also much faster than that in BM, enhanced by the contribution of grain boundary diffusion resulted from its finer prior austenite grains. The FGHAZ had denser and smaller Laves-phase precipitates during the precipitation period in comparison with BM, obviously improved the creep strength by precipitation hardening. However, this effect in FGHAZ reduced sharply during coarsening owing to its coarsening rate greater than that of BM. In addition to the initial coarse polygonal subgrains with low dislocation density in FGHAZ produced by the weld thermal cycle and subsequent tempering in post-weld heat treatment (PWHT), coarse Laves-phase precipitates on grain boundaries formed in the long-term thermal aging, contributing to the formation of the creep cavities, can also play a key role in Type IV fracture of welded joint in 9% Cr steels

The First Protocol Of Reaching Consensus Under Unreliable Mobile Edge Computing Paradigm

Mobile Edge Computing (MEC) is an emerging technology that enables computing directly at the edge of the cloud computing network. Therefore, it is important that MEC is applied with reliable transmission. The problem of reaching consensus in the distributed system is one of the most important issues in designing a reliable transmission network. However, all previous protocols for the consensus problem are not suitable for an MEC paradigm. It is the first time an optimal protocol of reaching consensus is pro- posed for MEC paradigm. The protocol makes all fault-free nodes communicate with each other and collect the exchanged messages to decide a common value. Based on the common value, the protocol ensures all fault-free nodes reach consensus without the influence of unreliable transmission. Finally, we proved theoretically that the proposed protocol can tolerate the maximum number of faulty components and using only two rounds of message exchanges