Information-Theoretic Limits of Bistatic Integrated Sensing and Communication

The bistatic integrated sensing and communication (ISAC) system model avoids the strong self-interference in a monostatic ISAC system by employing a pair of physically separated sensing transceiver and maintaining the merit of co-designing radar sensing and communications on shared spectrum and hardware. Inspired by the appealing benefits of bistatic radar, we study bistatic ISAC, where a transmitter sends a message to a communication receiver and a sensing receiver at another location carries out a decoding-and-estimation(DnE) operation to obtain the state of the communication receiver. In this paper, both communication and sensing channels are modelled as state-dependent memoryless channels with independent and identically distributed time-varying state sequences. We consider a rate of reliable communication for the message at the communication receiver as communication metric. The objective of this model is to characterize the capacity-distortion region, i.e., the set of all the achievable rate while simultaneously allowing the sensing receiver to sense the state sequence with a given distortion threshold. In terms of the decoding degree on this message at the sensing receiver, we propose three achievable DnE strategies, the blind estimation, the partial-decoding-based estimation, and the full-decoding-based estimation, respectively. Based on the three strategies, we derive the three achievable rate-distortion regions. In addition, under the constraint of the degraded broadcast channel, i.e., the communication receiver is statistically stronger than the sensing receiver, and the partial-decoding-based estimation, we characterize the capacity region. Examples in both non-degraded and degraded cases are provided to compare the achievable rate-distortion regions under three DnE strategies and demonstrate the advantages of ISAC over independent communication and sensing.Comment: 40 pages, 7 figure

Advances in Research on Biogenic Amines in Wine

Biogenic amines (BA) are the general term for a class of bioactive low-molecular mass organic compounds containing amino groups. Excessive intake of BA will cause adverse physiological reactions and even endanger life. This article presents a systematic review of the sources, biosynthetic mechanism, microbial traceability, detection technologies, and influential factors of BA in wine, as well as the strategies used to control BA during winemaking. This article will provide theoretical guidance for efficient analysis and control of BA in wine, which will in turn promote the healthy and green development of the Chinese wine industry

Coupling effects of Fe(II) and CaCO3 application on cadmium uptake and accumulation in rice (Oryza sativa L.)

Excessive cadmium (Cd) in rice, caused by Cd pollution of farmlands, poses a serious threat to human health. In this study, a pot experiment was conducted to investigate the effects of two doses of CaCO3 (Ca1: 2 g kg-1, Ca2: 10g kg-1), two types of Fe(II) (EDTA-Fe(II) and FeSO4; 0.14 g Fe kg-1), and their combined application on the uptake and accumulation of Cd in rice plants grown in Cd-contaminated acidic soil. The results revealed that FeSO4 significantly increased rice grain biomass, whereas the other treatments had no significant effects. Further, the addition of EDTA-Fe(II) or FeSO4 significantly enhanced iron plaque formation on the root surface and increased the Fe content in the rice plants and porewater. Compared to the control, CaCO3 addition weakened the formation of iron plaque and reduced the Fe concentration in the porewater and root tissue, stems and leaves, whereas the Fe concentration in brown rice and the husks remained unaffected. Combined application of CaCO3 and Fe(II) significantly promoted the formation of iron plaque and increased the Fe concentration in brown rice. However, the Cd concentration in the iron plaque was reduced by CaCO3 addition but increased by Fe(II) treatment. Notably, all treatments reduced the Cd concentration in all rice plant tissues. The application of Ca1, Ca2, EDTA-Fe(II), FeSO4, Ca1+EDTA-Fe(II), Ca1+FeSO4, Ca2+EDTA-Fe(II) and Ca2+FeSO4 significantly reduced the Cd concentration in brown rice by 69%, 63%, 51%, 60%, 46%, 39%, 38%, and 29%, respectively. These results indicate that the application of CaCO3, EDTA-Fe(II)/FeSO4, or their combination can effectively reduce Cd accumulation and translocation in rice plants

Global analysis and control for a vector-borne epidemic model with multi-edge infection on complex networks

In this study, a vector-borne epidemic model with multi-edge infection on complex networks is built. Using the method of next-generation matrix, the basic reproduction number R0{R}_{0} is calculated, and if R01{R}_{0}\gt 1, there exists a unique endemic equilibrium i∗=(i1∗,i2∗,…,in∗){i}^{\ast }=\left({i}_{1}^{\ast },{i}_{2}^{\ast },\ldots ,{i}_{n}^{\ast }) that is globally attractive. Moreover, three control strategies are proposed to control the spread of infectious diseases. Finally, some numerical simulations are given to illustrate our theoretical results

Eliminating The Negative Effect Of Monoclinic Nb2O5 On Electrical Properties Of (K0.5Na0.5)Nbo3 Ceramics By Two-Step Sintering

This study investigates the electrical properties of (K0.5Na0.5)NbO3 (KNN) lead-free piezoelectric ceramics prepared by using monoclinic Nb2O5 as the starting material. The results reveal that the samples prepared by two-step sintering procedure are much better than those prepared by conventional sintering procedure. The piezoelectric constant (d33) reaches the value measured from the samples prepared from orthorhombic Nb2O5, suggesting the two-step sintering procedure could be an effective method to remove the negative effect of monoclinic Nb2O5. The underlying mechanism for the improving effect is discussed

A nonspecific Setaria italica lipid transfer protein gene plays a critical role under abiotic stress

Lipid transfer proteins (LTPs) are a class of cysteine-rich soluble proteins having small molecular weights. LTPs participate in flower and seed development, cuticular wax deposition, also play important roles in pathogen and abiotic stress responses. A nonspecific LTP gene (SiLTP) was isolated from a foxtail millet (Setaria italica) suppression subtractive hybridization (SSH) library enriched for differentially expressed genes after abiotic stress treatments. A semi-quantitative reverse transcriptase PCR analysis showed that SiLTP was expressed in all foxtail millet tissues. Additionally, the SiLTP promoter drove GUS expression in root tips, stems, leaves, flowers and siliques of transgenic Arabidopsis. Quantitative real-time PCR indicated that the SiLTP expression was induced by NaCl, polyethylene glycol and abscisic acid. SiLTP was localized in the cytoplasm of tobacco leaf epidermal cells and maize protoplasts. The ectopic expression of SiLTP in tobacco resulted in higher levels of salt and drought tolerance than in the wild type (WT). To further assess the function of SiLTP, SiLTP overexpression (OE) and RNA interference (RNAi)-based transgenic foxtail millet were obtained. SiLTP-OE lines performed better under salt and drought stresses compared with WT plants. In contrast, the RNAi lines were much more sensitive to salt and drought compared than WT. Electrophoretic mobility shift assays and yeast one-hybrids indicated that the transcription factor (TF) ABA-responsive DRE-binding protein (SiARDP) could bind to the dehydration-responsive element of SiLTP promoter in vitro and in vivo, respectively. Moreover, the SiLTP expression levels were higher in SiARDP-OE plants compared than the WT. These results confirmed that SiLTP plays important roles in improving salt and drought stress tolerance of foxtail millet, and may partly be up-regulated by SiARDP. SiLTP may provide an effective genetic resource for molecular breeding in crops to enhance salt and drought tolerance levels

Pharmacological Inhibition of S100A4 Attenuates Fibroblast Activation and Renal Fibrosis

The TGF-β/Smad3 signaling pathway is an important process in the pathogenesis of kidney fibrosis. However, the molecular mechanisms are not completely elucidated. The current study examined the functional role of S100A4 in regulating TGF-β/Smad3 signaling in fibroblast activation and kidney fibrosis development. S100A4 was upregulated in the kidney in a murine model of renal fibrosis induced by folic acid nephropathy. Further, S100A4 was predominant in the tubulointerstitial cells of the kidney. Pharmacological inhibition of S100A4 with niclosamide significantly attenuated fibroblast activation, decreased collagen content, and reduced extracellular matrix protein expression in folic acid nephropathy. Overexpression of S100A4 in cultured renal fibroblasts significantly facilitated TGF-β1-induced activation of fibroblasts by increasing the expression of α-SMA, collagen-1 and fibronectin. In contrast, S100A4 knockdown prevented TGF-β1-induced activation of fibroblast and transcriptional activity of Smad3. Mechanistically, S100A4 interacts with Smad3 to stabilize the Smad3/Smad4 complex and promotes their translocation to the nucleus. In conclusion, S100A4 facilitates TGF-β signaling via interaction with Smad3 and promotes kidney fibrosis development. Manipulating S100A4 may provide a beneficial therapeutic strategy for chronic kidney disease

Effects Of Geo2 Addition On Sintering And Properties Of (K0.5Na0.5)Nbo3 Ceramics

Lead-free (K0.5Na0.5)NbO3 (KNN) piezoelectric ceramics doped with different amounts of GeO2 were prepared and characterized. GeO2 was found to effectively improve the sinterability and piezoelectric properties of the material. The improvement in the sinterability is ascribed to the formation of a liquid phase, which decreased the sintering temperature from 1080°C to 1010°C. The improvement in the properties is attributed to the replacement of Nb5+ with Ge4+ to form acceptor dopants. The following optimized properties were obtained from the KNN ceramic with 0.75 wt% GeO2: piezoelectric constant (d33) = 126 pC/N, planar electromechanical coupling coefficient (kp) = 42.8%, mechanical quality factor (Qm) = 140, and dielectric loss (tanδ) = 3.8%