1,604 research outputs found
Fault-tolerant load reduction control for large offshore wind turbines
Offshore wind turbines suffer from asymmetrical loading (blades, tower etc.), leading to enhanced structural fatigue. As well as asymmetrical loading different types of faults (pitch system faults etc.) can occur simultaneously, causing degradation of load mitigation performance and enhanced fatigue. Individual pitch control (IPC) provides an important method to achieve mitigation of rotor asymmetric loads, but this may be accompanied by a resulting enhancement of pitch movement leading to increased possibility of pitch system faults, which negative effects on IPC performance.This thesis focuses on combining the fault tolerant control (FTC) techniques with load reduction strategies by a more intelligent pitch control system (i.e. collective pitch control and IPC) for offshore wind turbines in a system level to reduce the operation & maintenance costs and improve the system reliability. The scenario of load mitigation is analogous to the FTC problem because the action of rotor/tower bending can be considered as a fault effect. The essential concept is to attempt to account for all the "fault effects" in the rotor and tower systems which can weaken the effect of bending moment reduction through the use of IPC.Motivated by the above, this thesis focuses on four aspects to fill the gap of the combination between FTC and IPC schemes. Firstly, a preview control system using model predictive control with future wind speed is proposed, which could be a possible alternative to using LiDAR technology when using preview control for load reduction. Secondly, a multivariable IPC controller for both blade and tower load mitigation considering the inherent couplings is investigated. Thirdly, appropriate control-based fault monitoring strategies including fault detection and fault estimation FE-based FTC scheme are proposed for several different pitch actuator/sensor faults. Furthermore, the combined analysis of an FE-based FTC strategy with the IPC system at a system level is provided and the robustness of the proposed strategy is verified
Observation of sub-Doppler absorption in the /Lambda-type three-level Doppler-broadened cesium system
Thanks to the atomic coherence in coupling laser driven atomic system,
sub-Doppler absorption has been observed in Doppler-broadened cesium vapor cell
via the /Lambda-type three-level scheme. The linewidth of the sub-Doppler
absorption peak become narrower while the frequency detuning of coupling laser
increases. The results are in agreement with the theoretical prediction by G.
Vemuri et al.[PRA,Vol.53(1996) p.2842].Comment: 12 pages, 5 figures, to appear on Applied Physics
Yetter–Drinfel’d Hopf algebras on basic cycle
A class of Yetter–Drinfel’d Hopf algebras on basic cycle is constructed.Побудовано клас хопфових алгебр Єттера-Дрінфельда на базовому циклі
A NDT&E Methodology Based on Magnetic Representation for Surface Topography of Ferromagnetic Materials
Accurate evaluation is the final aim of nondestructive testing (NDT). However, the present electromagnetic NDT methods are commonly used to check the existence of defects, and all the tested targets only consist of concave defects (i.e., section-loss defects), such as holes, cracks, or corrosions, failing to evaluate the tested surface topography, which mainly consists of concave-shaped and bump-shaped features. At present, it is accepted that the commonly observed signals of the defects mainly manifest themselves in a single-/double-peak wave and their up/down directions of the peak wave can be easily changed just by changing the directions of either applied magnetization or pick-up units even for one defect. Unlike the present stylus and optical methods for surface topography inspections, a new electromagnetic NDT and evaluation (NDT&E) methodology is provided based on the accurate magnetic representation of surface topography, in which a concave-shaped feature produces “positive” magnetic flux leakages (MFLs) and therefore forms a “raised” signal wave but a bump-shaped feature generates “negative” magnetic fields and therefore leads to a “sunken” signal wave. In this case, the corresponding relationships between wave features and surface topography are presented and the relevant evaluation system for testing surface topography (concave, bumped, and flat features) is built. The provided methodology was analyzed and verified by finite element and experimental methods. Meanwhile, the different dimension parameters of height/depth and width of surface topography are further studied
Adaptive Reduced Rank Regression
We study the low rank regression problem , where and are and dimensional
vectors respectively. We consider the extreme high-dimensional setting where
the number of observations is less than . Existing algorithms
are designed for settings where is typically as large as
. This work provides an efficient algorithm which
only involves two SVD, and establishes statistical guarantees on its
performance. The algorithm decouples the problem by first estimating the
precision matrix of the features, and then solving the matrix denoising
problem. To complement the upper bound, we introduce new techniques for
establishing lower bounds on the performance of any algorithm for this problem.
Our preliminary experiments confirm that our algorithm often out-performs
existing baselines, and is always at least competitive.Comment: 40 page
Study on Thermal Comfort for University Classrooms in Pre- Heating Season in Xi\u27an
Thermal comfort of students in university classrooms during transition season in Xi\u27an, before heating, is studied. Indoor thermal environment parameters and outdoor weather parameters of seven typical classrooms in a university campus in Xi\u27an were measured. At the same time, the subjective questionnaires were used to know students\u27 satisfaction and expectation with various environmental factors. 992 valid questionnaires were received. Based on the data collected, the thermal comfort of occupants in classroom was discussed and a thermal comfort adaptive model was established. The results show that the range of thermal comfort acceptable to students is broader than that defined in the ASHARE standard, indicating that students have some adaptability to indoor air environment. The measured indoor thermal neutral temperature is lower than the theoretical one. There is difference between the thermal sensation vote (TSV) and the predicted mean vote (PMV). The slope of TSV cure vs. operative temperature is greater than that of PMV, indicating that under actual condition, students are more sensitive to air changes. The proposed adaptive model provided a reference for understanding the thermal comfort of university buildings under natural ventilation environment in Xi’an, helpful to improve the thermal comfort and save energy for university buildings in Xi’an
A New Method of SHM for Steel Wire Rope and its Apparatus
Steel wire ropes often operate in a high‐speed swing status in practical engineering, and the reliable structural health monitoring (SHM) for them directly relates to human lives; however, they are usually beyond the capability of present portable magnet magnetic flux leakage (MFL) sensors based on yoke magnetic method due to its strong magnetic force and large weight. Unlike the yoke method, a new method of SHM for steel wire rope is proposed by theoretical analyses and also verified by finite element method (FEM) and experiments, which features much weaker magnetic interaction force and similar magnetization capability compared to the traditional yoke method. Meanwhile, the relevant detection apparatus or sensor is designed by simulation optimization. Furthermore, experimental comparisons between the new and yoke sensors for steel wire rope inspection are also conducted, which successfully confirm the characterization of smaller magnetic interaction force, less wear, and damage in contrast with traditional technologies. Finally, methods for SHM of steel wire rope and apparatus are discussed, which demonstrate the good practicability for SHM of steel wire rope under poor working conditions
Effects of Indoor Temperature and Air Movement on Perceived Air Quality in the Natural Ventilated Classrooms
Perceived air quality is an important aspect in current guidelines and standards for indoor environment. It represents occupants’ real feeling about indoor air and affected by almost all environmental parameters, such as the temperature, the relative humidity, the air movement, and et al. Studies were conducted mainly in controlled climate chambers or air-conditioned spaces, rarely in natural ventilated spaces. In this paper, the effects of temperature and air movement on perceived air quality in natural ventilated classrooms are investigated. The indoor environmental parameters in 7 classrooms for 35 lessons are continuously measured and the students in class are asked to report their perception on the temperature, air movement, and the air quality of classrooms by filling questionnaires at once after a lesson. The number of received validated questionnaires is 992. The correlation analysis is used to investigate the effects of temperature and air movement on the perceived air quality. Results show that in natural ventilation classrooms, which are warm at temperature and moderate at humidity with an air speed lower than 0.1m/s, it is the thermal sensation rather than the temperature, enthalpy, thermal acceptability, or CO2 concentration that affects the perception of occupants for air quality. The perception for air movement influences the air quality acceptability. Increasing air movement increases the air quality acceptability. Besides, it is found that the preference of air movement is related to the air quality acceptability. When participants feel that the air movement is just suitable, the acceptability of air quality reaches the highest. When participants feel the air movement need to be adjusted, the air quality acceptability decreases
- …