1,368 research outputs found

    Foam Properties and Detergent Abilities of the Saponins from Camellia oleifera

    Get PDF
    The defatted seed meal of Camellia oleifera has been used as a natural detergent and its extract is commercially utilized as a foam-stabilizing and emulsifying agent. The goal of this study was to investigate the foam properties and detergent ability of the saponins from the defatted seed meal of C. oleifera. The crude saponin content in the defatted seed meal of C. oleifera was 8.34 and the total saponins content in the crude saponins extract was 39.5% (w/w). The foaming power of the 0.5 crude saponins extract solution from defatted seed meal of C. oleifera was 37.1 of 0.5 SLS solution and 51.3% to that of 0.5% Tween 80 solution. The R5 value of 86.0% represents good foam stability of the crude saponins extracted from the defatted seed meal of the plant. With the reduction of water surface tension from 72 mN/m to 50.0 mN/m, the 0.5% crude saponins extract solution has wetting ability. The sebum-removal experiment indicated that the crude saponins extract has moderate detergency. The detergent abilities of the saponins from C. oleifera and Sapindus mukorossi were also compared

    Splint therapy for disc displacement with reduction of the temporomandibular joint. Part I: Modified mandibular splint therapy

    Get PDF
    AbstractThe aims of this preliminary study were to present a modified mandibular splint together with a treatment regimen and to evaluate their effects on the treatment of reciprocal joint sounds of the temporomandibular joint (TMJ). The study participants were recruited from 312 consecutive patients in the temporomandibular disorder clinic of a medical center in Taiwan from January 2003 to December 2003. From among these, 59 cases with typical reciprocal clicking were selected for this study. All participants were treated with a modified mandibular splint and then followed up for 6 months. Successful treatment was defined as leading to the disappearance of the joint sounds of TMJ, as described by patients. Based on clinical evaluation, the overall success rate was 71.2% (42/59) with minimal temporary complications. Patients with clicking at less than 3.5cm of interincisal opening had a success rate of 92.5%, which was higher than the success rate of patients with clicking at a mouth opening of 3.5cm or more. This study showed that a modified mandibular splint can be used to treat reciprocal clicking of the TMJ effectively and encouraged us to conduct further study on the efficacy of this splint to treat disc displacement with reduction of TMJ using magnetic resonance imaging examination

    Study on the Stability of DeoxyArbutin in an Anhydrous Emulsion System

    Get PDF
    The skin-whitening agent, deoxyArbutin, is a potent tyrosinase inhibitor that is safer than hydroquinone and arbutin. However, it is thermolabile in aqueous solutions, where it decomposes to hydroquinone. Pharmaceutical and cosmetic emulsions are normally oil-in-water (o/w) or water-in-oil (w/o) systems; however, emulsions can be formulated with no aqueous phase to produce an anhydrous emulsion system. An anhydrous emulsion system could offer a stable vehicle for compounds that are sensitive to hydrolysis or oxidation. Therefore, to enhance the stability of deoxyArbutin in formulations, we chose the polyol-in-silicone, anhydrous emulsion system as the basic formulation for investigation. The quantity of deoxyArbutin and the accumulation of hydroquinone in both hydrous and anhydrous emulsions at various temperatures were analyzed through an established high performance liquid chromatographic (HPLC) method. The results indicated that water increased the decomposition of deoxyArbutin in the formulations and that the polyol-in-silicone, oil-based, anhydrous emulsion system provided a relatively stable surrounding for the deoxyArbutin that delayed its degradation at 25 Β°C and 45 Β°C. Moreover, the composition of the inner hydrophilic phase, containing different amounts of glycerin and propylene glycol, affected the stability of deoxyArbutin. Thus, these results will be beneficial when using deoxyArbutin in cosmetics and medicines in the future

    Pressure tunable quantum anomalous Hall states in a topological antiferromagnet

    Full text link
    Mechanical modulation of the lattice parameter can modify the electronic structure and manipulate the magnetic coupling of a material without introducing impurities. Inspired by success in pressure-controlled magnetism, we investigate the effect of hydrostatic pressure on quantized Chern states in the antiferromagnetic topological insulator MnBi2Te4, using transport as a probe. We show that pressure can enhance the robustness of quantum anomalous Hall (QAH) phases that are otherwise delicate in 7SL MnBi2Te4 and in the spin-flop (SF) state of 8SL MnBi2Te4. We explain our findings using a coupled Dirac cone model of MnBi2Te4, which identifies stronger hybridization between van der Waals layers as the driver of topological states. We further demonstrate that moderate pressures readily available in laboratory systems can provide reversible control of magnetic and topological phases. Our results reveal a strong connection between the mechanical engineering of band topology and magnetism.Comment: 11 pages, 4 figure

    Symbiodinium spp. associated with scleractinian corals from Dongsha Atoll (Pratas), Taiwan, in the South China Seal

    Get PDF
    Dongsha Atoll (also known as Pratas) in Taiwan is the northernmost atoll in the South China Sea and a designated marine national park since 2007. The marine park's scope of protection covers the bio-resources of its waters in addition to uplands, so it is important to have data logging information and analyses of marine flora and fauna, including their physiology, ecology, and genetics. As part of this effort, we investigated Symbiodinium associations in scleractinian corals from Dongsha Atoll through surveys carried out at two depth ranges (shallow, 1-5 m; and deep, 10-15 m) in 2009 and during a bleaching event in 2010. Symbiodinium composition was assessed using restriction fragment length polymorphism (RFLP) of 28S nuclear large subunit ribosomal DNA (nlsrDNA). Our results showed that the 796 coral samples from seven families and 20 genera collected in 2009 and 132 coral samples from seven families and 12 genera collected in 2010 were associated with Symbiodinium C, D and C+D. Occurrence of clade D in shallow water (24.5%) was higher compared to deep (14.9%). Due to a bleaching event in 2010, up to 80010 of coral species associated with Symbiodinium C underwent moderate to severe bleaching. Using the fine resolution technique of denaturing gradient gel electrophoresis (DGGE) of internal transcribed spacer 2 (ITS2) in 175 randomly selected coral samples, from 2009 and 2010, eight Symbiodinium C types and two Symbiodinium D types were detected. This study is the first baseline survey on Symbiodinium associations in the corals of Dongsha Atoll in the South China Sea, and it shows the dominance of Symbiodinium Glade C in the population

    Eliminating temporal correlation in quantum-dot entangled photon source by quantum interference

    Full text link
    Semiconductor quantum dots, as promising solid-state platform, have exhibited deterministic photon pair generation with high polarization entanglement f\textcompwordmark idelity for quantum information applications. However, due to temporal correlation from inherently cascaded emission, photon indistinguishability is limited, which restricts their potential scalability to multi-photon experiments. Here, by utilizing quantum interferences to decouple polarization entanglement from temporal correlation, we improve multi-photon entanglement f\textcompwordmark idelity from (58.7Β±2.2)%(58.7\pm 2.2)\% to (75.5Β±2.0)%(75.5\pm 2.0)\%. Our work paves the way to realize scalable and high-quality multi-photon states from quantum dots

    Is the whole greater than the sum of its parts? De novo assembly strategies for bacterial genomes based on paired-end sequencing

    Get PDF
    Number of misassemblies for different assembly strategies. Number of misassemblies for the de novo assembly results for E. coli DH1 and S. Parasanguinis FW213 are shown together with their standard errors of the mean. Group A [PE] and Group A [SE] represent all reads assembled as paired-end reads and single end reads, respectively. Group A [PEҀ‰+Ҁ‰SE] represents all the non-overlapped paired-end reads assembled together with merged reads. Group M [PE] and Group M [SE] represent Group M reads assembled as paired-end reads and single end reads, respectively. The numbers of misassemblies fluctuate a lot when depths of read number are low and gradually decreases until they reach a steady number. The paired-end reads (Group A [PE] and Group M [PE]) in S. Parasanguinis FW213 gave the lowest number of misassemblies when depths of read number are high. (TIFF 669 kb

    Constitutive Expression of Thermobifida fusca Thermostable Acetylxylan Esterase Gene in Pichia pastoris

    Get PDF
    A gene encoding the thermostable acetylxylan esterase (AXE) in Thermobifida fusca NTU22 was amplified by PCR, sequenced and cloned into the Pichia pastoris X-33 host strain using the vector pGAPZΞ±A, allowing constitutive expression and secretion of the protein. Recombinant expression resulted in high levels of extracellular AXE production, as high as 526 U/mL in the Hinton flask culture broth. The purified enzyme showed a single band at about 28 kDa by SDS-polyacrylamide gel electrophoresis after being treated with endo-Ξ²-N-acetylglycosaminidase H; this agrees with the predicted size based on the nucleotide sequence. About 70% of the original activity remained after heat treatment at 60 Β°C for three hours. The optimal pH and temperature of the purified enzyme were 8.0 and 60 Β°C, respectively. The properties of the purified AXE from the P. pastoris transformant are similar to those of the AXE from an E. coli transformant
    • …
    corecore