19 research outputs found
Rapid Replication of High Aspect Ratio Molds for UV Embossing
This paper describes a promising fabrication technique for rapid replication of high aspect ratio microstructured molds for UV embossing. The process involves casting silicone rubber on a microstructured master, replicating an epoxy mold using the PDMS rubber mold and finally, metallizing the surfaces of the epoxy mold by electroless plating nickel (EN). The preliminary study suggests that this technique is feasible for rapid replication of high aspect ratio molds for UV embossing. Uniform molds can be replicated rapidly through this technique making the process economical and accessible.Singapore-MIT Alliance (SMA
Biomimetic urchin-like surface based on poly (lactic acid) membrane for robust anti-wetting and anti-bacteria properties
Biomimetic urchin-like surface based on poly (lactic acid) membrane for robust anti-wetting and anti-bacteria propertie
Structural and Thermoelectric Properties of Gd<sub>2−2<i>x</i></sub>Sr<sub>1+2<i>x</i></sub>Mn<sub>2</sub>O<sub>7</sub> Double-Layered Manganites
Double-layered manganites are natural superlattices with low thermal conductivity, which is of importance for potential thermoelectric applications. The Gd2−2xSr1+2xMn2O7 (x = 0.5; 0.625; 0.75) were prepared by the solid-state reaction method. All the samples crystallize in the tetragonal I4/mmm Sr3Ti2O7 type structure. The unit cell volume and the distortion in the MnO6 octahedra increase with increasing Gd content. Their thermoelectric properties were investigated between 300 and 1200 K. All exhibit an n-type semiconducting behavior. The electrical conductivity (σ) increases while the absolute value of the Seebeck coefficient (|S|) decreases with increasing Gd content. Simultaneous increases in σ and |S| with increasing temperature are observed at temperatures approximately higher than 600 K, and the power factor reaches a maximum value of 18.36 μW/(m K²) for x = 0.75 at 1200 K. The thermal conductivity (κ) is lower than 2 W/(m K) over the temperature range of 300–1000 K for all the samples and a maximum dimensionless figure of merit ZT of 0.01 is obtained for x = 0.75 at 1000 K
Development of Electromagnetic-Wave-Shielding Polyvinylidene Fluoride–Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene–Carbon Nanotube Composites by Improving Impedance Matching and Conductivity
Absorption-dominated electromagnetic interference (EMI) shielding is attained by improving impedance matching and conductivity through structural design. Polyvinylidene fluoride (PVDF)–Ti3C2Tx MXene–single-walled carbon nanotubes (SWCNTs) composites with layered heterogeneous conductive fillers and segregated structures were prepared through electrostatic flocculation and hot pressing of the PVDF composite microsphere-coated MXene and SWCNTs in a layer-by-layer fashion. Results suggest that the heterogeneous fillers improve impedance matching and layered coating, and hot compression allows the MXene and SWCNTs to form a continuous conducting network at the PVDF interface, thereby conferring excellent conductivity to the composite. The PVDF-MXene-SWCNTs composite showed a conductivity of 2.75 S cm−1 at 2.5% MXene and 1% SWCNTs. The EMI shielding efficiency (SE) and contribution from absorption loss to the total EMI SE of PVDF-MXene-SWCNTs were 46.1 dB and 85.7%, respectively. Furthermore, the PVDF-MXene-SWCNTs composite exhibited excellent dielectric losses and impedance matching. Therefore, the layered heteroconductive fillers in a segregated structure optimize impedance matching, provide excellent conductivity, and improve absorption-dominated electromagnetic shielding
Flexible Polydimethylsilane Nanocomposites Enhanced with a Three-Dimensional Graphene/Carbon Nanotube Bicontinuous Framework for High-Performance Electromagnetic Interference Shielding
High-performance
electromagnetic interference (EMI)-shielding materials
featuring lightweight, flexibility, excellent conductivity, and shielding
properties, as well as superior mechanical robustness, are highly
required, yet their development still remains a daunting challenge.
Here, a flexible and exceptional EMI-shielding polydimethylsilane/reduced
graphene oxide/single-wall carbon nanotube (PDMS/rGO/SWCNT) nanocomposite
was developed by a facile backfilling approach utilizing a preformed
rGO/SWCNT aerogel as the three-dimensional (3D) conducting and reinforcement
skeleton. Pristine SWCNTs acting as secondary conductive fillers showed
intriguing advantages, whose intrinsically high conductivity could
be well preserved in the composites because of no surface acidification
treatment. The robust and interconnected 3D network can not only serve
as fast channels for electron transport but also effectively transfer
external load. Accordingly, a prominent electrical conductivity of
1.2 S cm<sup>–1</sup> and an outstanding EMI-shielding effectiveness
of around 31 dB over the X-band frequency range were achieved for
the resultant composite with an ultralow loading of 0.28 wt %, which
is among the best results for currently reported conductive polymer
nanocomposites. Moreover, the composite displayed excellent mechanical
properties and bending stability; for example, a 233% increment in
the compression strength was obtained compared with that of neat PDMS.
These observations indicate the unrivalled effectiveness of 3D rGO/SWCNT
aerogel as a reinforcement to endow the polymer composites with outstanding
conductive and mechanical properties toward high-performance EMI-shielding
application
Flexible Polydimethylsilane Nanocomposites Enhanced with a Three-Dimensional Graphene/Carbon Nanotube Bicontinuous Framework for High-Performance Electromagnetic Interference Shielding
High-performance
electromagnetic interference (EMI)-shielding materials
featuring lightweight, flexibility, excellent conductivity, and shielding
properties, as well as superior mechanical robustness, are highly
required, yet their development still remains a daunting challenge.
Here, a flexible and exceptional EMI-shielding polydimethylsilane/reduced
graphene oxide/single-wall carbon nanotube (PDMS/rGO/SWCNT) nanocomposite
was developed by a facile backfilling approach utilizing a preformed
rGO/SWCNT aerogel as the three-dimensional (3D) conducting and reinforcement
skeleton. Pristine SWCNTs acting as secondary conductive fillers showed
intriguing advantages, whose intrinsically high conductivity could
be well preserved in the composites because of no surface acidification
treatment. The robust and interconnected 3D network can not only serve
as fast channels for electron transport but also effectively transfer
external load. Accordingly, a prominent electrical conductivity of
1.2 S cm<sup>–1</sup> and an outstanding EMI-shielding effectiveness
of around 31 dB over the X-band frequency range were achieved for
the resultant composite with an ultralow loading of 0.28 wt %, which
is among the best results for currently reported conductive polymer
nanocomposites. Moreover, the composite displayed excellent mechanical
properties and bending stability; for example, a 233% increment in
the compression strength was obtained compared with that of neat PDMS.
These observations indicate the unrivalled effectiveness of 3D rGO/SWCNT
aerogel as a reinforcement to endow the polymer composites with outstanding
conductive and mechanical properties toward high-performance EMI-shielding
application