46 research outputs found

    A state-space based method to predict thermal performance of pipeembedded double skin façade: case study in Guangzhou

    Get PDF
    Pipe-embedded double skin facade, which arranges pipes in shading device, is an alternative to reduce indoor demand and save energy. To simulate annual performance of this system, a simplified approach based on optical and thermal property is proposed at first, in which dynamic performance is acquired through state-space method. Then the model is validated with former investigation and shows good accuracy. Indoor room temperature with the pipe-embedded double skin façade is analyzed under different types of room in Guangzhou at last. Results show that the pipe-embedded double skin façade could guarantee a barely satisfactory indoor environment where indoor heat gain is small in most time. Besides, superiority would be obvious when solar radiation is strong, indicating the applicability in some typical region with abundant sunshine

    Remote Estimation of Rice Yield With Unmanned Aerial Vehicle (UAV) Data and Spectral Mixture Analysis

    Get PDF
    The accurate assessment of rice yield is crucially important for China’s food security and sustainable development. Remote sensing (RS), as an emerging technology, is expected to be useful for rice yield estimation especially at regional scales. With the development of unmanned aerial vehicles (UAVs), a novel approach for RS has been provided, and it is possible to acquire high spatio-temporal resolution imagery on a regional scale. Previous reports have shown that the predictive ability of vegetation index (VI) decreased under the influence of panicle emergence during the later stages of rice growth. In this study, a new approach which integrated UAV-based VI and abundance information obtained from spectral mixture analysis (SMA) was established to improve the estimation accuracy of rice yield at heading stage. The six-band image of all studied rice plots was collected by a camera system mounted on an UAV at booting stage and heading stage respectively. And the corresponding ground measured data was also acquired at the same time. The relationship of several widely-used VIs and Rice Yield was tested at these two stages and a relatively weaker correlation between VI and yield was found at heading stage. In order to improve the estimation accuracy of rice yield at heading stage, the plot-level abundance of panicle, leaf and soil, indicating the fraction of different components within the plot, was derived from SMA on the six-band image and in situ endmember spectra collected for different components. The results showed that VI incorporated with abundance information exhibited a better predictive ability for yield than VI alone. And the product of VI and the difference of leaf abundance and panicle abundance was the most accurate index to reliably estimate yield for rice under different nitrogen treatments at heading stage with the coefficient of determination reaching 0.6 and estimation error below 10%

    High Degree Picosecond Pulse Compression in Chalcogenide-Silicon Slot Waveguide Taper

    Get PDF
    In this paper, we propose and design a chalcogenide (As2S3)-based slot waveguide taper with exponentially decreasing dispersion profile to realize high-degree pulse compression of low-power chirped solitons. Based on the waveguide taper designed, pulse compression of fundamental solitons, and chirped 2-soliton breather are both investigated numerically. With self-similar pulse compression scheme, a 1 ps input pulse is compressed to 81.5 fs in 6 cm propagation. By using 2-soliton breather pulses, a 1 ps chirped pulse is compressed to 80.3 fs in just 2.54 cm. This is the first demonstration of the feasibility of high-degree nonlinear pulse compression in As2S3-based slot waveguide taper

    Demonstration of intermodal four-wave mixing by femtosecond pulses centered at 1550 nm in an air-silica photonic crystal fiber

    Get PDF
    In this paper, we demonstrated experimentally the intermodal four-wave mixing effect by launching femtosecond pulses centered at 1550 nm into deeply normal dispersion region in the fundamental guided-mode of an air-silica photonic crystal fiber with two zero dispersion wavelengths. When intermodal phase-matching condition is satisfied, the energy of the pump waves at 1550 nm in the fundamental guided-mode is converted to the anti-Stokes waves around 1258 nm and Stokes waves around 2018 nm both in the second-order guided-mode. When femtosecond pulses at input average power Pav of 90 mW are propagated inside 22 cm long photonic crystal fiber, the conversion efficiencies ηas and ηs of the anti-Stokes and Stokes waves generated are 8.5 and 6.8%, respectively. We also observed that the influences of the fiber bending and walk-off effect between the fundamental and second-order guided-modes on intermodal four-wave mixing-based frequency conversion process are very small

    Mid-Infrared Self-Similar Compression of Picosecond Pulse in an Inversely Tapered Silicon Ridge Waveguide

    Get PDF
    On chip high quality and high degree pulse compression is desirable in the realization of integrated ultrashort pulse sources, which are important for nonlinear photonics and spectroscopy. In this paper, we design a simple inversely tapered silicon ridge waveguide with exponentially decreasing dispersion profile along the propagation direction, and numerically investigate self-similar pulse compression of the fundamental soliton within the mid-infrared spectral region. When higher-order dispersion (HOD), higher-order nonlinearity (HON), losses (α), and variation of the Kerr nonlinear coefficient γ(z) are considered in the extended nonlinear Schrödinger equation, a 1 ps input pulse at the wavelength of 2490 nm is successfully compressed to 57.29 fs in only 5.1-cm of propagation, along with a compression factor Fc of 17.46. We demonstrated that the impacts of HOD and HON are minor on the pulse compression process, compared with that of α and variation of γ(z). Our research results provide a promising solution to realize integrated mid-infrared ultrashort pulse sources

    Comprehensive analysis of passive generation of parabolic similaritons in tapered hydrogenated amorphous silicon photonic wires

    Get PDF
    Parabolic pulses have important applications in both basic and applied sciences, such as high power optical amplification, optical communications, all-optical signal processing, etc. The generation of parabolic similaritons in tapered hydrogenated amorphous silicon photonic wires at telecom (λ~1550 nm) and mid-IR (λ≥2100 nm) wavelengths is demonstrated and analyzed. The self-similar theory of parabolic pulse generation in passive waveguides with increasing nonlinearity is presented. A generalized nonlinear Schrödinger equation is used to describe the coupled dynamics of optical field in the tapered hydrogenated amorphous silicon photonic wires with either decreasing dispersion or increasing nonlinearity. The impacts of length dependent higher-order effects, linear and nonlinear losses including two-photon absorption, and photongenerated free carriers, on the pulse evolutions are characterized. Numerical simulations show that initial Gaussian pulses will evolve into the parabolic pulses in the waveguide taper designed

    Mid-infrared octave-spanning supercontinuum and frequency comb generation in a suspended germanium-membrane ridge waveguide

    Get PDF
    Stable octave-spanning supercontinuum (SC) in the mid-infrared (MIR) region finds extensive applications in spectroscopy, metrology, biochemistry, etc. The absorption of conventional silicon- or silicon oxide-dominated nonlinear media makes SC generation in MIR region technically challenging. In this paper, we propose ultra-broadband MIR-SC generation using a suspended germanium-membrane ridge waveguide. We theoretically showed that when pump pulses centered at 4.8 um with pulse width at 180 fs and peak power at 800 W are injected into a 4-mm long proposed ridge waveguide, the SC generated ranges from 1.96 ~ 12 um (about 2.6 octaves), extending deep into the “fingerprint” region. The first-order coherence is calculated to confirm the stability of the generated SC. The performance of the SC-based frequency comb is also investigated by assuming a 100-pulses pump source at a repetition rate of 100 KHz

    One-Pot Visual Detection of African Swine Fever Virus Using CRISPR-Cas12a

    Get PDF
    African swine fever virus (ASFV) is a leading cause of worldwide agricultural loss. ASFV is a highly contagious and lethal disease for both domestic and wild pigs, which has brought enormous economic losses to a number of countries. Conventional methods, such as general polymerase chain reaction and isothermal amplification, are time-consuming, instrument-dependent, and unsatisfactorily accurate. Therefore, rapid, sensitive, and field-deployable detection of ASFV is important for disease surveillance and control. Herein, we created a one-pot visual detection system for ASFV with CRISPR/Cas12a technology combined with LAMP or RPA. A mineral oil sealing strategy was adopted to mitigate sample cross-contamination between parallel vials during high-throughput testing. Furthermore, the blue fluorescence signal produced by ssDNA reporter could be observed by the naked eye without any dedicated instrument. For CRISPR-RPA system, detection could be completed within 40 min with advantageous sensitivity. While CRISPR-LAMP system could complete it within 60 min with a high sensitivity of 5.8 × 102 copies/μl. Furthermore, we verified such detection platforms display no cross-reactivity with other porcine DNA or RNA viruses. Both CRISPR-RPA and CRISPR-LAMP systems permit highly rapid, sensitive, specific, and low-cost Cas12a-mediated visual diagnostic of ASFV for point-of-care testing (POCT) applications

    Advanced progress on χ(3) nonlinearity in chip-scale photonic platforms

    Get PDF
    χ(3) nonlinearity enables ultrafast femtosecond scale light-to-light coupling and manipulation of intensity, phase, and frequency. χ(3) nonlinear functionality in micro-and nano-scale photonic waveguides can potentially replace bulky fiber platforms for many applications. In this Review, we summarize and comment on the progress on χ(3) nonlinearity in chip-scale photonic platforms, including several focused hot topics such as broadband and coherent sources in the new bands, nonlinear pulse shaping, and all-optical signal processing. An outlook of challenges and prospects on this hot research field is given at the end
    corecore