Coordination of H2O2 on praseodymia nanorods and its application in sensing cholesterol

The advancement of functional nanomaterials has promoted the development of biomarker sensors underpinning promising analytical tools for a range of bioanalytes such as cholesterol. In this work, we established a light-on fluorescent probe for cholesterol in human serum by coordination of H2O2 on the surface of praseodymia nanorods (Pr6O11 NRs). The distinctive interactions of various nucleotides and H2O2 with praseodymia were examined, whereby good fluorescent quenching and recovery capability were observed. A highly sensitive and selective cholesterol detection was achieved in serum samples with a detection limit of 0.1 mu M and recovery of 97.2-101.3%, respectively, due to the high oxygen mobility of praseodymia. The result suggests strong potential for work towards a key probe for a portable clinical test system for cholesterol as well as other H2O2-deriving biomarkers, potentially addressing the ever-increasing demand for the prevention of cardiovascular disease. (C) 2022 Vietnam National University, Hanoi. Published by Elsevier B.V.This work was supported by the Natural Science Foundation of Shandong Province (Grant ZR2017LB028) , Key R&D Program of Shandong Province (Grant 2018GSF118032) , and Fundamental Research Funds for the Central Universities (Grant 18CX02125A) in China. The project with reference number of ENE2017-82451-C3-2-R from Ministry of Science, Innovation and Universities of Spain is also acknowledged. This work has been co-financed by the 2014-2020 ERDF Operational Programme and by the Department of Economy, Knowledge, Business and University of the Regional Government of Andalusia with reference number of FEDER-UCA18-107316

Efficient hole abstraction for highly selective oxidative coupling of methane by Au-sputtered TiO2 photocatalysts

Photocatalytic oxidative coupling of methane (OCM) produces C2 molecules that can be used as building blocks for synthesis of fuels and chemicals. However, the yield rate and the selectivity of C2 products are still moderate due to the stable nature of methane molecules. Here we develop a Au nanocluster-loaded TiO2 photocatalyst by a sputtering approach, achieving a high methane conversion rate of 1.1 mmol h−1, C2 selectivity of ~90% and apparent quantum efficiency of 10.3 ± 0.6%. The high C2/C2+ yield rate is on the same order of magnitude as the benchmark thermal catalysts in OCM processes operated at high temperature (>680 °C). Au nanoparticles are shown to prolong TiO2 photoelectron lifetimes by a factor of 66 for O2 reduction, together with Au acting as a hole acceptor and catalytic centre to promote methane adsorption, C–H activation and C–C coupling. This work underscores the importance of multifunctional co-catalysts and mechanistic understanding to improve photocatalytic OCM

Synergy of Pd atoms and oxygen vacancies on In₂O₃ for methane conversion under visible light

Methane (CH4) oxidation to high value chemicals under mild conditions through photocatalysis is a sustainable and appealing pathway, nevertheless confronting the critical issues regarding both conversion and selectivity. Herein, under visible irradiation (420 nm), the synergy of palladium (Pd) atom cocatalyst and oxygen vacancies (OVs) on In2O3 nanorods enables superior photocatalytic CH4 activation by O2. The optimized catalyst reaches ca. 100 μmol h-1 of C1 oxygenates, with a selectivity of primary products (CH3OH and CH3OOH) up to 82.5%. Mechanism investigation elucidates that such superior photocatalysis is induced by the dedicated function of Pd single atoms and oxygen vacancies on boosting hole and electron transfer, respectively. O2 is proven to be the only oxygen source for CH3OH production, while H2O acts as the promoter for efficient CH4 activation through ·OH production and facilitates product desorption as indicated by DFT modeling. This work thus provides new understandings on simultaneous regulation of both activity and selectivity by the synergy of single atom cocatalysts and oxygen vacancies

ABTS-Modified Silica Nanoparticles as Laccase Mediators for Decolorization of Indigo Carmine Dye

Efficient reuse and regeneration of spent mediators are highly desired for many of the laccases’ biotechnology applications. This investigation demonstrates that a redox mediator 2,2′-azino-bis-(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS) covalently attached to silica nanoparticles (SNPs) effectively mediated dye decolorization catalyzed by laccase. Characteristics of ABTS-modified silica nanoparticles (ABTS-SNPs) were researched by scanning electron microscopy and Fourier-transformed infrared spectroscopy. When ABTS and ABTS-SNPs were used as laccase mediators, the decolorization yields of 96 and 95% were, respectively, obtained for indigo carmine dye. The results suggest that ABTS immobilized on SNPs can be used as laccase mediators as they retain almost the same efficiency as the free ABTS. The oxidized ABTS-SNPs were regenerated by their reduction reaction with ascorbic acid. Decolorization efficiency of regenerated ABTS-SNPs and their initial forms were found to be almost equivalent. Six reuse cycles for spent ABTS-SNPs were run for the treatment of indigo carmine, providing decolorization yields of 96–77%. Compared with free mediator, the immobilized mediators have the advantage of being easily recovered, regenerated, and reused making the whole process environmentally friendly

Selective Removal of Hemoglobin from Blood Using Hierarchical Copper Shells Anchored to Magnetic Nanoparticles

Hierarchical copper shells anchored on magnetic nanoparticles were designed and fabricated to selectively deplete hemoglobin from human blood by immobilized metal affinity chromatography. Briefly, CoFe2O4 nanoparticles coated with polyacrylic acid were first synthesized by a one-pot solvothermal method. Hierarchical copper shells were then deposited by immobilizing Cu2+ on nanoparticles and subsequently by reducing between the solid CoFe2O4@COOH and copper solution with NaBH4. The resulting nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectroscopy, and vibrating sample magnetometry. The particles were also tested against purified bovine hemoglobin over a range of pH, contact time, and initial protein concentration. Hemoglobin adsorption followed pseudo-second-order kinetics and reached equilibrium in 90 min. Isothermal data also fit the Langmuir model well, with calculated maximum adsorption capacity 666 mg g−1. Due to the high density of Cu2+ on the shell, the nanoparticles efficiently and selectively deplete hemoglobin from human blood. Taken together, the results demonstrate that the particles with hierarchical copper shells effectively remove abundant, histidine-rich proteins, such as hemoglobin from human blood, and thereby minimize interference in diagnostic and other assays

Stable ABTS Immobilized in the MIL-100(Fe) Metal-Organic Framework as an Efficient Mediator for Laccase-Catalyzed Decolorization

The successful encapsulation of 2,2′-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS), a well-known laccase mediator, within a mesoporous metal-organic framework sample (i.e., MIL-100(Fe)) was achieved using a one-pot hydrothermal synthetic method. The as-prepared ABTS@MIL-100(Fe) was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, nitrogen sorption, and cyclic voltammetry (CV). Our ABTS@MIL-100(Fe)-based electrode exhibited an excellent electrochemical response, indicating that MIL-100(Fe) provides an appropriate microenvironment for the immobilization and electroactivity of ABTS molecules. ABTS@MIL-100(Fe) was then evaluated as an immobilized laccase mediator for dye removal using indigo carmine (IC) as a model dye. Through the application of laccase in combination with a free (ABTS) or immobilized (ABTS@MIL-100(Fe)) mediator, decolorization yields of 95% and 94%, respectively, were obtained for IC after 50 min. In addition, following seven reuse cycles of ABTS@MIL-100(Fe) for dye treatment, a decolorization yield of 74% was obtained. Dye decolorization occurred through the breakdown of the chromophoric group by the Laccase/ABTS@MIL-100(Fe) system, and a catalytic mechanism was proposed. We therefore expect that the stability, reusability, and validity of ABTS@MIL-100(Fe) as a laccase mediator potentially render it a promising tool for dye removal, in addition to reducing the high running costs and potential toxicity associated with synthetic mediators

Immobilization of a Laccase/2,2’-azino-bis-(3-ethylbenzothiazoline)-6-sulfonic Acid System to Layered Double Hydroxide/Alginate Biohybrid Beads for Biodegradation of Malachite Green Dye

The application of laccase-mediator-based catalysis is limited owing to the high cost of laccases and mediators and the potential toxicity of free mediators. Here, a novel biocatalyst (Im-LMS) was fabricated by immobilizing both laccase and a mediator (2,2’-azino-bis-[3-ethylbenzothiazoline]-6-sulfonic acid) on layered double hydroxide/alginate biohybrid beads. The catalytic activity of Im-LMS was evaluated for dye decolorization using malachite green. The decolorization yields of malachite green by Im-LMS and the free laccase-mediator system were 92% within 120 min and 90% within 90 min. Malachite green solution was detoxified completely after biodegradation by Im-LMS. Following eight reuse cycles of Im-LMS for dye treatment, a decolorization yield of 79% was obtained. The activity of Im-LMS was almost completely stable after being stored for 10 days. The recyclability and stability of Im-LMS will be helpful for reducing the running cost and potential toxicity associated with mediators to facilitate practical applications

Laccase Immobilization on Poly(p-Phenylenediamine)/Fe3O4 Nanocomposite for Reactive Blue 19 Dye Removal

Magnetic poly(p-phenylenediamine) (PpPD) nanocomposite was synthesized via mixing p-phenylenediamine solution and Fe3O4 nanoparticles and used as a carrier for immobilized enzymes. Successful synthesis of PpPD/Fe3O4 nanofiber was confirmed by transmission electron microscopy and Fourier transform infrared spectroscopy. Laccase (Lac) was immobilized on the surface of PpPD/Fe3O4 nanofiber through covalent bonding for reactive blue 19 dye removal. The immobilized Lac-nanofiber conjugates could be recovered from the reaction solution using a magnet. The optimum reaction pH and temperature for the immobilized Lac were 3.5 and 65 °C, respectively. The storage, operational stability, and thermal stability of the immobilized Lac were higher than those of its free counterpart. The dye removal efficiency of immobilized Lac was about 80% in the first 1 h of incubation, while that of free Lac was about 20%. It was found that the unique electronic properties of PpPD might underlie the high dye removal efficiency of immobilized Lac. Over a period of repeated operation, the dye removal efficiency was above 90% during the first two cycles and remained at about 43% after eight cycles. Immobilized Lac on PpPD/Fe3O4 nanofiber showed high stability, easy recovery, reuse capabilities, and a high removal efficiency for reactive blue 19 dye; therefore, it provides an optional tool for dye removal from wastewater

Correction: Zhongjie Xu, et al. Analysis of the Interaction of Dp44mT with Human Serum Albumin and Calf Thymus DNA using Molecular Docking and Spectroscopic Techniques. Int. J. Mol. Sci. 2016, 17, 1042

n/

Analysis of the Interaction of Dp44mT with Human Serum Albumin and Calf Thymus DNA Using Molecular Docking and Spectroscopic Techniques

Di-2-pyridylketone-4,4,-dimethyl-3-thiosemicarbazone (Dp44mT) exhibits significant antitumor activity. However, the mechanism of its pharmacological interaction with human serum albumin (HSA) and DNA remains poorly understood. Here, we aimed to elucidate the interactions of Dp44mT with HSA and DNA using MTT assays, spectroscopic methods, and molecular docking analysis. Our results indicated that addition of HSA at a ratio of 1:1 did not alter the cytotoxicity of Dp44mT, but did affect the cytotoxicity of the Dp44mT-Cu complex. Data from fluorescence quenching and UV-VIS absorbance measurements demonstrated that Dp44mT could bind to HSA with a moderate affinity (Ka = approximately 104 M−1). CD spectra revealed that Dp44mT could slightly disrupt the secondary structure of HSA. Dp44mT could also interact with Ct-DNA, but had a moderate binding constant (KEB = approximately 104 M−1). Docking studies indicated that the IB site of HSA, but not the IIA and IIIA sites, could be favorable for Dp44mT and that binding of Dp44mT to HSA involved hydrogen bonds and hydrophobic force, consistent with thermodynamic results from spectral investigations. Thus, the moderate binding affinity of Dp44mT with HSA and DNA partially contributed to its antitumor activity and may be preferable in drug design approaches