Multiple-relaxation-time lattice Boltzmann simulation for flow, mass transfer, and adsorption in porous media

In this paper, to predict the dynamics behaviors of flow and mass transfer with adsorption phenomena in porous media at the representative elementary volume (REV) scale, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model for the convection-diffusion equation is developed to solve the transfer problem with an unsteady source term in porous media. Utilizing the Chapman-Enskog analysis, the modified MRT-LB model can recover the macroscopic governing equations at the REV scale. The coupled MRT-LB model for momentum and mass transfer is validated by comparing with the finite-difference method and the analytical solution. Moreover, using the MRT-LB method coupled with the linear driving force model, the fluid transfer and adsorption behaviors of the carbon dioxide in a porous fixed bed are explored. The breakthrough curve of adsorption from MRT-LB simulation is compared with the experimental data and the finite-element solution, and the transient concentration distributions of the carbon dioxide along the porous fixed bed are elaborated upon in detail. In addition, the MRT-LB simulation results show that the appearance time of the breakthrough point in the breakthrough curve is advanced as the mass transfer resistance in the linear driving force model increases; however, the saturation point is prolonged inversely

Study on carbon-fixing,oxygen-releasing,temperature-reducing and humidity-increasing effects of evergreen plants in south highway

Li-6400 portable photosynthesis system,was used to test the diurnal variations of photosynthetic rate and stomatal conductance of evergreen plants in Southern Highway,and to calculate their ability of absorbing carbon dioxide and releasing oxygen and to calculate the transpiring water volume and absorbing heat quantity of plants.Results showed that Euonymus fortunei Hand-Mazz,Hedera helix.Aucuba eriobotryaefolia had better carbon-fixing and oxygen-releasing effects,while Photinia serrulata,Trachycarpus fortunei,Radix Ophiopogonis had worse carbon-fixing and oxygen-releasing effects.Radix Ophiopogonis,Photinia glabra,Euonymus fortunei Hand.-Mazz had higher cooling and humidification ability,while Photinia serrulata,Trachycarpus fortunei did not act as well as them.Euonymus fortunei Hand.-Mazz and Hedera helix had higher leaf chlorophyll in per unit mass,values are 12.91、10.34、9.93 mg·g-1.Radix Ophiopogonis、Cinnamomum camphora(Linn.) Presl and Trachycarpus fortunei had lower leaf chlorophyll in per unit mass,value is 3.55、2.67、2.06 mg·g-1.Releasing oxygen,fixing carbon,net assimilation and chlorophyll content has good correlation(P＜0.05)

Super-stretchable borophene

Recent success in the synthesis of the two-dimensional borophene on silver substrates has attracted strong interest in exploring its extraordinary properties for potential technological applications. The single-layer borophene has a buckled structure with atomic ridges. By using the first-principles density functional theory calculations, we show that the two-dimensional borophene is highly stretchable with strong anisotropy The strain-to-failure in the direction along the atomic ridges is nearly twice as large as that across the atomic ridges. The straining-induced flattening and the subsequent stretch of the flat borophene are accounted for the large strain-to-failure for tension along the atomic ridges. We also investigated the mechanics of monolayer borophene under biaxial tension and we found that the biaxial tension increases the strength across the atomic ridges but decreases the failure strain along the atomic ridges. Furthermore, when the bilayer borophene is stretched along the cross-plane direction, the strength and failure strain of the bilalyer borophene are much higher than those of the bilayer graphene due to the very strong inter-layer chemical bonding

Enhancement of vapor condensation heat transfer on the micro- and nano-structured superhydrophobic surfaces

Recently, micro- or nano- structured surfaces haven been developed to enhance condensation heat transfer, water harvesting and self-cleaning. However, at large subcoolings, condensate floods the subcooled substrate, thus deteriorating the heat transfer efficiency. Here, the superhydrophobic surfaces with micropillared and nanopillared structures are proposed to enhance heat transfer at large subcoolings. The influence of micropillar spacing and surface subcooling on the droplet dynamics and heat transfer performance is experimentally investigated using microscopic visualization techniques. In addition, the microscopic modeling of condensation heat transfer on the microstructured surfaces is performed using the mesoscopic lattice Boltzmann method. The results demonstrate that the droplet size distribution on the micropillared surface is significantly smaller over that of the nanostructured surface. The heat transfer coefficient decreases with the increase of micropillar spacing. As the subcooling rises, although the condensate floods the substrate, the heat transfer coefficient of the S10R30 (S10R30 represents the micropillar arrays with s = 10 mu m and 2r = 60 mu m) surface is enhanced by 26.4% compared to the hydrophobic nanostructured surface. This is because the height of liquid film is the same of order of magnitude as the micropillars, reducing the thermal resistance caused by the liquid layer. Combining environmental scanning electron microscope (ESEM) observations and LB simulation results, it is concluded that the droplets first nucleate at the bottom corner of micropillars. In addition, the condensate droplets merge to form a film, fill the micropillar gaps, and cover the entire micropillars, leading to a sharp decrease in heat flux. These findings provide a theoretical and experimental guidance for the development of condensing surfaces to enhance heat transfer. (C) 2021 Elsevier Ltd. All rights reserved

A two-region simulation model of vertical U-tube ground heat exchanger and its experimental verification

Heat transfer around vertical ground heat exchanger (GHE) is a common problem for the design and simulation of ground coupled heat pump (GCHP). In this paper, an updated two-region vertical U-tube GHE analytical model, which is fit for system dynamic simulation of GCHP, is proposed and developed. It divides the heat transfer region of GHE into two parts at the boundary of borehole wall, and the two regions are coupled by the temperature of borehole wall. Both steady and transient heat transfer method are used to analyze the heat transfer process inside and outside borehole, respectively. The transient borehole wall temperature is calculated for the soil region outside borehole by use of a variable heat flux cylindrical source model. As for the region inside borehole, considering the variation of fluid temperature along the borehole length and the heat interference between two adjacent legs of U-tube, a quasi-three dimensional steady-state heat transfer analytical model for the borehole is developed based on the element energy conservation. The implement process of the model used in the dynamic simulation of GCHPs is illuminated in detail and the application calculation example for it is also presented. The experimental validation on the model is performed in a solar-geothermal multifunctional heat pump experiment system with two vertical boreholes and each with a 30 m vertical 1 1/4 in nominal diameter HDPE single U-tube GHE, the results indicate that the calculated fluid outlet temperatures of GHE by the model are agreed well with the corresponding test data and the guess relative error is less than 6%.Ground coupled heat pump Vertical U-tube Ground heat exchanger (GHE) Two-region simulation model Experimental validation

Study of Key Technology of Gob-Side Entry Retention in a High Gas Outburst Coal Seam in the Karst Mountain Area

In the gob-side entry retaining by roof cutting (GERRC) technique, pressure is offloaded via directional roof cutting, and a roadway is automatically formed due to the ground pressure and rock-breaking expansion. To improve the application of the theory and technical system of GERRC in the Karst area in Southwest China, this research studies the key technology of GERRC in a high gas outburst coal seam, based on the engineering background of the 39114 working face of the Honglin coal mine. According to the geological conditions of the 39114 working face, by means of formula calculation, UDEC numerical modeling, and on-site drilling peeping, the optimal roof-cutting parameters suitable for the 39114 working face were determined: the roof cutting height was 7 m, the roof cutting angle was 15°, and the spacing of pre-splitting blasting holes was 600 mm. Additionally, the above roof-cutting parameters have achieved good results in the engineering practices of the 39114 transportation roadway, which shows that the technology of GERRC is feasible in high gas outburst mines and achieves the goal of safe and efficient mining

Understanding the Mechanism of Strong Mining Tremors near the Goaf Area of Longwall Mining: A Case Study

Strong mining tremors (SMTs) frequently occur in super-thick strata near the goaf when mining. Since 2021, there have been three consecutive SMTs with magnitude greater than 2.0 in longwall 1208 of the Shilawusu Coal Mine. These SMTs caused mine production to be suspended for more than 290 days and affected over 100 households located on the shaking ground, and seriously threatened the safety of underground workers and restricted production capacity. Therefore, it is essential to investigate the occurrence mechanism of SMTs in super-thick strata goaf mining in order to understand the phenomenon, how the disaster of mining tremors occurs, and the prevention and control of mining tremor disasters. In this study, field observation, numerical analysis, and theoretical calculation were used to study the occurrence mechanism of three SMTs in the Shilawusu Coal Mine. The results show that the super-thick strata fracture induced by the SMTs is generally higher by one to three orders of magnitude in some of the source mechanical parameters compared to other mining tremors, and so is more likely to cause ground shaking. Field observations revealed that before and after the occurrence of SMTs, the maximum surface subsidence suddenly increased by about 0.1 m and showed a “stepped” increase, and the super-thick strata began to experience fractures. The following theoretical mechanics model of super-thick strata was established: at the goaf stage of mining, with the increase in the area of the hanging roof, the super-thick strata will experience initial and periodic fractures, which can easily induce SMTs. The relative moment tensor inversion method was used to calculate the source mechanism of SMTs, which was found to be caused by the tensile rupture resulting from the initial and periodic ruptures of super-thick strata, in addition to the shear rupture generated by the adjustment of unstable strata structures. As the mining continues on the longwall face, there is still a possibility of SMT occurrence. This paper provides some insights into the mechanism and prevention of SMT in underground coal mines

Trend Analysis of Temperature and Precipitation Extremes during Winter Wheat Growth Period in the Major Winter Wheat Planting Area of China

In this study, the major winter wheat planting area of China is selected as the study area, with the time scale of the growth period of winter wheat (a total of 56 growth periods during October 1961 to May 2016). The significance, stability, magnitude of the trend and the average trend of the study area with eight temperature indices and seven precipitation indices of 453 meteorological stations are tested by Mann−Kendall method and Sen’s nonparametric method. The following observation can be made: (1) the cold extreme indices show strong and stable downward trend in most of the stations in the study area, while the hot extreme indices show a strong and stable upward trend, especially in the northern winter wheat planting area and the north of the southern winter wheat planting area. (2) The trends of extreme precipitation indices in most of the sites in the study area are insignificant and unstable. Only in R20mm, a significant and stable decreasing trend is shown in some stations, which is mainly located in the northern winter wheat planting area and part of the central and western regions in the study area. The results in some ways could enrich the references for understanding the climate change in the growth period of winter wheat in the region and help to formulate a better agronomic management practice of winter wheat