27,191 research outputs found
Analytical considerations of flow boiling heat transfer in metal-foam filled tubes
Flow boiling in metal-foam filled tube was analytically investigated based on a modified microstructure model, an original boiling heat transfer model and fin analysis for metal foams. Microstructure model of metal foams was established, by which fiber diameter and surface area density were precisely predicted. The heat transfer model for flow boiling in metal foams was based on annular pattern, in which two phase fluid was composed by vapor region in the center of the tube and liquid region near the wall. However, it was assumed that nucleate boiling performed only in the liquid region. Fin analysis and heat transfer network for metal foams were integrated to obtain the convective heat transfer coefficient at interface. The analytical solution was verified by its good agreement with experimental data. The parametric study on heat transfer coefficient and boiling mechanism was also carried out
Possible observation of phase separation near a quantum phase transition in doubly connected ultrathin superconducting cylinders of aluminum
The kinetic energy of superconducting electrons in an ultrathin, doubly
connected superconducting cylinder, determined by the applied flux, increases
as the cylinder diameter decreases, leading to a destructive regime around
half-flux quanta and a superconductor to normal metal quantum phase transition
(QPT). Regular step-like features in resistance vs. temperature curves taken at
fixed flux values were observed near the QPT in ultrathin Al cylinders. It is
proposed that these features are most likely resulted from a phase separation
near the QPT in which normal regions nucleate in a homogeneous superconducting
cylinder.Comment: 4 pages, 4 figures, to appear in Phys. Rev. Let
Technical note: In situ U–Th–He dating by 4He ∕ 3He laser microprobe analysis
In situ U-Th-He geochronology is a potentially disruptive technique that combines laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) with laser microprobe noble gas mass spectrometry. Despite its potential to revolutionize (detrital) thermochronology, in situ U-Th-He dating is not widely used due to persistent analytical challenges. A major issue is that current in situ U-Th-He dating approaches require that the U, Th, and He measurements are expressed in units of molar concentration, in contrast with conventional methods, which use units of molar abundance. Whereas molar abundances can be reliably determined by isotope dilution, accurate concentration measurements are not so easy to obtain. In the absence of matrix-matched U-Th concentration standards and accurate He ablation pit measurements, the required molar concentration calculations introduce an uncertainty that is higher than the conventional method, an uncertainty that is itself difficult to accurately quantify. We present a solution to this problem by using proton-induced 3He as a proxy for ablation pit volume and by pairing samples with a standard of known U-Th-He age. Thus, the U-Th-He age equation can be solved using relative rather than absolute concentration measurements. Pilot experiments show that the new method produces accurate results. However, it is prone to overdispersion, which is attributed to gradients in the proton fluence. These gradients can be measured, and their effect can be removed by fixing the geometry of the sample and the standard during the proton irradiation
- …