29,206 research outputs found
Fracture strain of LPCVD polysilicon
A polysilicon bridge-slider structure in which one end of the bridge is fixed and the other is connected to a plate sliding in two flanged guideways, is designed and fabricated to study the strain at fracture of LPCVD polysilicon. In the experiments, a mechanical probe is used to push against the plate end, compressing and forcing the bridge to buckle until it breaks. The distance that the plate needs to be pushed to break the bridge is recorded. Nonlinear beam theory is then used to interpret the results of these axially-loaded-bridge experiments. The measured average fracture strain of as-deposited LPCVD polysilicon is 1.72%. High-temperature annealing of the bridge-sliders at 1000°C for 1 h decreases the average fracture strain to 0.93%
Negative Differential Resistance Induced by Mn Substitution at SrRuO3/Nb:SrTiO3 Schottky Interfaces
We observed a strong modulation in the current-voltage characteristics of
SrRuO/Nb:SrTiO Schottky junctions by Mn substitution in SrRuO,
which induces a metal-insulator transition in bulk. The temperature dependence
of the junction ideality factor indicates an increased spatial inhomogeneity of
the interface potential with substitution. Furthermore, negative differential
resistance was observed at low temperatures, indicating the formation of a
resonant state by Mn substitution. By spatially varying the position of the Mn
dopants across the interface with single unit cell control, we can isolate the
origin of this resonant state to the interface SrRuO layer. These results
demonstrate a conceptually different approach to controlling interface states
by utilizing the highly sensitive response of conducting perovskites to
impurities
Buried heterostructure vertical-cavity surface-emitting laser with semiconductor mirrors
We report a buried heterostructure vertical-cavity surface-emitting laser
fabricated by epitaxial regrowth over an InGaAs quantum well gain medium. The
regrowth technique enables microscale lateral confinement that preserves a high
cavity quality factor (loaded 4000) and eliminates parasitic
charging effects found in existing approaches. Under optimal spectral overlap
between gain medium and cavity mode (achieved here at = 40 K) lasing was
obtained with an incident optical power as low as = 10 mW
( = 808 nm). The laser linewidth was found to be 3
GHz at 5
Assessment of MISR and MODIS cloud top heights through inter-comparison with a back-scattering lidar at SIRTA
One year of back-scattering lidar cloud boundaries and optical depth were analysed for coincident inter-comparison with the latest processed versions of the NASA-TERRA MISR stereo and MODIS CO2-slicing operational cloud top heights. Optically thin clouds were found to be accurately characterised by the MISR cloud top height product as long as no other cloud was present at lower altitude. MODIS cloud top heights were generally found within the cloud extent retrieved by lidar; agreement improved as cloud optical depth increased and when CO2-slicing was the only technique used for the retrieval. The difference between Lidar and MISR cloud top heights was found to lie between −0.1 and 0.4 km for low clouds and between 0.1 and 3.1 km for high clouds. The difference between Lidar and MODIS cloud top heights was found to lie between −1.2 and 1.5 km for low clouds and between −1.4 and 2.7 km for high clouds
Jet Modification in a Brick of QGP Matter
We have implemented the LPM effect into a microscopic transport model with
partonic degrees of freedom by following the algorithm of Zapp & Wiedemann. The
Landau-Pomeranchuk-Migdal (LPM) effect is a quantum interference process that
modifies the emission of radiation in the presence of a dense medium. In QCD
this results in a quadratic length dependence for radiative energy loss. This
is an important effect for the modification of jets by their passage through
the QGP.
We verify the leading parton energy loss in the model against the leading
order Baier-Dokshitzer-Mueller-Peigne-Schiff-Zakharov (BDMPS-Z) result.
We apply our model to the recent observations of the modification of di-jets
at the LHC.Comment: Presented at Panic 1
Nanometer scale electronic reconstruction at the interface between LaVO3 and LaVO4
Electrons at interfaces, driven to minimize their free energy, are
distributed differently than in bulk. This can be dramatic at interfaces
involving heterovalent compounds. Here we profile an abrupt interface between V
3d2 LaVO3 and V 3d0 LaVO4 using electron energy loss spectroscopy. Although no
bulk phase of LaVOx with a V 3d1 configuration exists, we find a nanometer-wide
region of V 3d1 at the LaVO3/LaVO4 interface, rather than a mixture of V 3d0
and V 3d2. The two-dimensional sheet of 3d1 electrons is a prototypical
electronic reconstruction at an interface between competing ground states.Comment: 14 pages, 5 figure
Emission of Massive Scalar Fields by a Higher-Dimensional Rotating Black-Hole
We perform a comprehensive study of the emission of massive scalar fields by
a higher-dimensional, simply rotating black hole both in the bulk and on the
brane. We derive approximate, analytic results as well as exact numerical ones
for the absorption probability, and demonstrate that the two sets agree very
well in the low and intermediate-energy regime for scalar fields with mass
m_\Phi < 1 TeV in the bulk and m_\Phi < 0.5 TeV on the brane. The numerical
values of the absorption probability are then used to derive the Hawking
radiation power emission spectra in terms of the number of extra dimensions,
angular-momentum of the black hole and mass of the emitted field. We compute
the total emissivities in the bulk and on the brane, and demonstrate that,
although the brane channel remains the dominant one, the bulk-over-brane energy
ratio is considerably increased (up to 33%) when the mass of the emitted field
is taken into account.Comment: 28 pages, 18 figure
Super-resolution restoration of spaceborne HD videos using the UCL MAGiGAN system
We developed a novel SRR system, called Multi-Angle Gotcha image restoration with Generative Adversarial Network (MAGiGAN), to produce resolution enhancement of 3-5 times from multi-pass EO images. The MAGiGAN SRR system uses a combination of photogrammetric and machine vision approaches including image segmentation and shadow labelling, feature matching and densification, estimation of an image degradation model, and deep learning approaches, to retrieve image information from distorted features and training networks. We have tested the MAGiGAN SRR using the NVIDIA® Jetson TX-2 GPU card for onboard processing within a smart-satellite capturing high definition satellite videos, which will enable many innovative remote-sensing applications to be implemented in the future. In this paper, we show SRR processing results from a Planet® SkySat HD 70cm spaceborne video using a GPU version of the MAGiGAN system. Image quality and effective resolution enhancement are measured and discussed
Solvable senescence model with positive mutations
We build upon our previous analytical results for the Penna model of
senescence to include positive mutations. We investigate whether a small but
non-zero positive mutation rate gives qualitatively different results to the
traditional Penna model in which no positive mutations are considered. We find
that the high-lifespan tail of the distribution is radically changed in
structure, but that there is not much effect on the bulk of the population. Th
e mortality plateau that we found previously for a stochastic generalization of
the Penna model is stable to a small positive mutation rate.Comment: 3 figure
Gravitational Waves from Axisymmetric, Rotational Stellar Core Collapse
We have carried out an extensive set of two-dimensional, axisymmetric,
purely-hydrodynamic calculations of rotational stellar core collapse with a
realistic, finite-temperature nuclear equation of state and realistic massive
star progenitor models. For each of the total number of 72 different
simulations we performed, the gravitational wave signature was extracted via
the quadrupole formula in the slow-motion, weak-field approximation. We
investigate the consequences of variation in the initial ratio of rotational
kinetic energy to gravitational potential energy and in the initial degree of
differential rotation. Furthermore, we include in our model suite progenitors
from recent evolutionary calculations that take into account the effects of
rotation and magnetic torques. For each model, we calculate gravitational
radiation wave forms, characteristic wave strain spectra, energy spectra, final
rotational profiles, and total radiated energy. In addition, we compare our
model signals with the anticipated sensitivities of the 1st- and 2nd-generation
LIGO detectors coming on line. We find that most of our models are detectable
by LIGO from anywhere in the Milky Way.Comment: 13 pages, 22 figures, accepted for publication in ApJ (v600, Jan.
2004). Revised version: Corrected typos and minor mistakes in text and
references. Minor additions to the text according to the referee's
suggestions, conclusions unchange
- …