109,541 research outputs found
Recommended from our members
High-Order Dual-Port Quasi-Absorptive Microstrip Coupled-Line Bandpass Filters
In this article, we present the first demonstration of distributed and symmetrical all-band quasi-absorptive filters that can be designed to arbitrarily high orders. The proposed quasi-absorptive filter consists of a bandpass section (reflective-type coupled-line filter) and absorptive sections (a matched resistor in series with a shorted quarter-wavelength transmission line). Through a detailed analysis, we show that the absorptive sections not only eliminate out-of-band reflections but also determine the passband bandwidth (BW). As such, the bandpass section mainly determines the out-of-band roll-off and the order of the filter can be arbitrarily increased without affecting the filter BW by cascading more bandpass sections. A set of 2.45-GHz one-, two-, and three-pole quasi-absorptive microstrip bandpass filters are designed and measured. The filters show simultaneous input and output absorption across both the passband and the stopband. Measurement results agree very well with the simulation and validate the proposed design concept
Asteroseismology of the Scuti star HD 50844
Aims. We aim to probe the internal structure and investigate more detailed
information of the Scuti star HD 50844 with asteroseismology. Methods.
We analyse the observed frequencies of the Scuti star HD 50844
obtained by Balona (2014), and search for possible multiplets based on the
rotational splitting law of g-mode. We tried to disentangle the frequency
spectra of HD 50844 by means of the rotational splitting only. We then compare
them with theoretical pulsation modes, which correspond to stellar evolutionary
models with various sets of initial metallicity and stellar mass, to find the
best-fitting model. Results. There are three multiplets including two complete
triplets and one incomplete quintuplet, in which mode identifications for
spherical harmonic degree and azimuthal number are unique. The
corresponding rotational period of HD 50844 is found to be
2.44 days. The physical parameters of HD 50844 are well
limited in a small region by three modes identified as nonradial ones
(, , and ) and by the fundamental radial mode
(). Our results show that the three nonradial modes (, ,
and ) are all mixed modes, which mainly represent the property of the
helium core. The fundamental radial mode () mainly represents the
property of the stellar envelope. In order to fit these four pulsation modes,
both the helium core and the stellar envelope must be matched to the actual
structure of HD 50844. Finally, the mass of the helium core of HD 50844 is
estimated to be 0.173 0.004 for the first time. The physical
parameters of HD 50844 are determined to be 1.81 0.01 ,
0.008 0.001. 7508 125 K, log 3.658
0.004, 3.300 0.023 , 30.98 2.39 .Comment: 11 pages, 7 figures, 6 tables, accepted for publication in A&
Recommended from our members
Gradient design of metal hollow sphere (MHS) foams with density gradients
This is the post-print version of the final paper published in Composites Part B: Engineering. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2011 Elsevier B.V.Metal hollow sphere (MHS) structures with a density gradient have attracted increasing attention in the effort to pursue improved energy absorption properties. In this paper, dynamic crushing of MHS structures of different gradients are discussed, with the gradients being received by stacks of hollow spheres of the same external diameter but different wall thicknesses in the crushing direction. Based on the dynamic performance of MHS structures with uniform density, a crude semi-empirical model is developed for the design of MHS structures in terms of gradient selections for energy absorption and protection against impact. Following this, dynamic responses of density graded MHS foams are comparatively analyzed using explicit finite element simulation and the proposed formula. Results show that the simple semi-empirical model can predict the response of density gradient MHS foams and is ready-to-use in the gradient design of MHS structures.The National Science Foundation of China and the State Key Laboratory of Explosion Science
and Technology (Beijing Institute of Technology
X-Ray Flares from Postmerger Millisecond Pulsars
Recent observations support the suggestion that short-duration gamma-ray
bursts are produced by compact star mergers. The X-ray flares discovered in two
short gamma-ray bursts last much longer than the previously proposed postmerger
energy release time scales. Here we show that they can be produced by
differentially rotating, millisecond pulsars after the mergers of binary
neutron stars. The differential rotation leads to windup of interior poloidal
magnetic fields and the resulting toroidal fields are strong enough to float up
and break through the stellar surface. Magnetic reconnection--driven explosive
events then occur, leading to multiple X-ray flares minutes after the original
gamma-ray burst.Comment: 10 pages, published in Scienc
- …