3,311 research outputs found
Influence of Coulomb interaction on the Aharonov-Bohm effect in an electronic Fabry-Perot interferometer
We study the role of Coulomb interaction in an electronic Fabry-Perot
interferometer (FPI) realized with chiral edge states in the integer quantum
Hall regime in the limit of weak backscattering. Assuming that a compressible
Coulomb island in a bulk region of the FPI is formed, we develop a capacitance
model which explains the plethora of experimental data on the flux and gate
periodicity of conductance oscillations. It is also shown that a suppression of
finite-bias visibility stems from a combination of weak Coulomb blockade and a
nonequilibrium dephasing by the quantum shot noise
Off-fault tensile cracks: A link between geological fault observations, lab experiments, and dynamic rupture models
We examine the local nature of the dynamic stress field in the vicinity of the tip of a semi-infinite sub-Rayleigh (slower than the Rayleigh wave speed, c_R) mode II crack with a velocity-weakening cohesive zone. We constrain the model using results from dynamic photoelastic experiments, in which shear ruptures were nucleated spontaneously in Homalite-100 plates along a bonded, precut, and inclined interface subject to a far-field uniaxial prestress. During the experiments, tensile cracks grew periodically along one side of the shear rupture interface at a roughly constant angle relative to the shear rupture interface. The occurrence and inclination of the tensile cracks are explained by our analytical model. With slight modifications, the model can be scaled to natural faults, providing diagnostic criteria for interpreting velocity, directivity, and static prestress state associated with past earthquakes on exhumed faults. Indirectly, this method also allows one to constrain the velocity-weakening nature of natural ruptures, providing an important link between field geology, laboratory experiments, and seismology
Dynamic membrane-assisted fermentation of food wastes for enhancing lactic acid production
© 2017 Elsevier Ltd A dynamic membrane (DM) module was inserted into a fermentation reactor to separate soluble products from the fermented mixture to increase lactic acid (LA) production from food wastes under acidogenic conditions (uncontrolled pH, pH 4 and 5). With a high total suspended solid content (20–40 g/L) in the fermenter, a stable DM could be maintained through regular backwashing. By effectively intercepting suspended solids and lactic acid bacteria (LAB), the fermenter was able to increase microbial activity and largely promote LA yield. Hydrolysis and acidogenesis rates increased with pH, and the highest LA yield (as high as 0.57 g/g-TS) was obtained at pH 4. The microbial community analysis showed that the relative abundance of Lactobacillus increased to 96.4% at pH 4, but decreased to 43.3% at pH 5. In addition, the DM could be easily recovered by intercepting larger particles in less than 2 h after each cycle of periodic backwashing
Applying fermentation liquid of food waste as carbon source to a pilot-scale anoxic/oxic-membrane bioreactor for enhancing nitrogen removal: Microbial communities and membrane fouling behaviour
© 2017 Elsevier Ltd Fermentation liquid of food waste (FLFW) was applied as an external carbon source in a pilot-scale anoxic/oxic-membrane bioreactor (A/O-MBR) system to enhance nitrogen removal for treating low COD/TN ratio domestic wastewater. Results showed that, with the FLFW addition, total nitrogen removal increased from lower than 20% to 44–67% during the 150 days of operation. The bacterial metabolic activities were obviously enhanced, and the significant change in microbial community structure promoted pollutants removal and favored membrane fouling mitigation. By monitoring transmembrane pressure and characterizing typical membrane foulants, such as extracellular polymeric substances (EPS), dissolved organic matter (DOM), and inorganics and biopolymers in the cake layer, it was confirmed that FLFW addition did not bring about any additional accumulation of membrane foulants, acceleration of fouling rate, or obvious irreversible membrane fouling in the whole operation period. Therefore, FLFW is a promising alternative carbon source to enhance nitrogen removal for the A/O-MBR system
Surface Morphology Evolution of GaAs by Low Energy Ion Sputtering
Low energy Ar+ion sputtering, typically below 1,200 eV, of GaAs at normal beam incident angle is investigated. Surface morphology development with respect to varying energy is analyzed and discussed. Dot-like patterns in the nanometer scale are obtained above 600 eV. As the energy approaches upper eV range regular dots have evolved. The energy dependent dot evolution is evaluated based on solutions of the isotropic Kuramoto-Sivashinsky equation. The results are in agreement with the theoretical model which describes a power law dependency of the characteristic wavelength on ion energy in the ion-induced diffusion regime
Characterization of preconcentrated domestic wastewater toward efficient bioenergy recovery: Applying size fractionation, chemical composition and biomethane potential assay.
Domestic wastewater (DWW) can be preconcentrated to facilitate energy recovery via anaerobic digestion (AD), following the concept of "carbon capture-anaerobic conversion-bioenergy utilization." Herein, real DWW and preconcentrated domestic wastewater (PDWW) were both subject to particle size fractionation (0.45-2000 μm). DWW is a type of low-strength wastewater (average COD of 440.26 mg/L), wherein 60% of the COD is attributed to the substances with particle size greater than 0.45 μm. Proteins, polysaccharides, and lipids are the major DWW components. PDWW with a high COD concentration of 2125.89 ± 273.71 mg/L was obtained by the dynamic membrane filtration (DMF) process. PDWW shows larger proportions of settleable and suspended fractions, and accounted for 63.4% and 33.8% of the particle size distribution, and 52.4% and 32.2% of the COD, respectively. The acceptable biomethane potential of 262.52 ± 11.86 mL CH4/g COD of PDWW indicates bioenergy recovery is feasible based on DWW preconcentration and AD
Structural Characteristics of Carbon Nanofibers for On-chip Interconnect Applications
In this letter, we compare the structures of plasma-enhanced chemical vapor deposition of Ni-catalyzed and Pd-catalyzed carbon nanofibers (CNFs) synthesized for on-chip interconnect applications with scanning transmission electron microscopy (STEM). The Ni-catalyzed CNF has a conventional fiberlike structure and many graphitic layers that are almost parallel to the substrate at the CNF base. In contrast, the Pd-catalyzed CNF has a multiwall nanotubelike structure on the sidewall spanning the entire CNF. The microstructure observed in the Pd-catalyzed fibers at the CNF-metal interface has the potential to lower contact resistance significantly, as our electrical measurements using current-sensing atomic force microscopy indicate. A structural model is presented based on STEM image analysis
Nutrients removal performance and sludge properties using anaerobic fermentation slurry from food waste as an external carbon source for wastewater treatment
© 2018 Elsevier Ltd Enhancement of nitrogen and phosphate removal using thermophilic fermentation slurry from food waste (FSFW) as external carbon source was investigated. Based on the batch tests, the soluble and particulate fractions of the FSFW acted as easily and slowly biodegradable carbon sources, respectively, and the fermented slurry showed the combined nutrients removal properties of soluble and solid organics. During the long-term operation of a sequencing batch reactor (SBR) with FSFW for wastewater treatment, the sludge particle size increased obviously, the bacterial metabolic capacity improved significantly, and some functional microorganisms were enriched selectively, which significantly promoted the nitrogen removal efficiency (approximately 90%) by enhancing the anoxic denitrification and simultaneous nitrification and denitrification (SND) processes. Moreover, high phosphate removal efficiency (above 98%) was achieved through the aerobic and anoxic phosphate accumulation processes. Thus, using the FSFW as supplementary carbon source is a suitable solution for both food waste disposal and wastewater treatment
Bright contrast imaging of carbon nanofiber-substrate interface
We present the contrast mechanisms of scanning electron microscopy (SEM) for visualizing the interface between carbon nanofibers (CNFs) and the underlying substrate. SEM imaging with electron beam energies higher than a certain threshold provides different image contrasts depending on whether CNFs are in contact with the substrate or suspended above the substrate. CNFs with diameters ranging from 25to250nm are examined with various electron beam energies. It is found that the threshold energy corresponds to the energy required to penetrate the CNF and its dependence on CNF diameter can be understood using the theory of electron range. This knowledge will be quite useful for interface imaging of all nanostructure devices
Nitrogen removal enhancement using lactic acid fermentation products from food waste as external carbon sources: Performance and microbial communities
© 2018 Elsevier Ltd In this study, nitrogen removal using the lactic acid fermentation products from food waste and other external chemical carbon sources (sodium acetate, sodium lactate and starch) was investigated. Similar to sodium acetate and lactate, the lactic acid-enriched fermentation liquid from food waste (FLFW) exhibited a high denitrification rate (5.5 mg NOx-N/(g-VSS h)) and potential (0.16 g NO3−-N/g COD), and could achieve high NH4+-N and total nitrogen (TN) removal efficiencies during long-term operation. Using FLFW as supplementary carbon sources reduced the extracellular polymeric substances (EPS) content, improved the settleability and achieved a satisfactory biomass yield of activated sludge. Additionally, the increased microbial metabolic activity and bacterial community diversity and the accumulation of unique bacteria in the activated sludge cultured with FLFW further promoted the organics utilization rate and nitrogen removal efficiency, indicating that the FLFW prepared from solid waste was an ideal carbon source for wastewater treatment
- …