4-Meth­oxy-3-nitro­biphen­yl

In the title compound, C13H11NO3, the dihedral angle between the two benzene rings is 36.69 (2)° and the nitro and methy­oxy groups are oriented at 29.12 (14) and 2.14 (12)° with respect to the benzene ring to which they are bonded

3,9-Dimethyl-3,9-bis­(4-nitro­phen­yl)-2,4,8,10-tetra­oxaspiro­[5.5]undeca­ne

In the title compound, C21H22N2O8, both of the nonplanar six-membered heterocycles adopt chair conformations. The dihedral angle between the terminal benzene rings is 58.22 (11)°. Weak inter­molecular C—H⋯O inter­actions are observed in the crystal structure

Regulatory Mechanisms of the Wnt/β-Catenin Pathway in Diabetic Cutaneous Ulcers

Skin ulcers are a serious complication of diabetes. Diabetic patients suffer from vascular lesions and complications such as peripheral neuritis, peripheral vascular lesions, and collagen abnormalities, which result in skin wounds that are refractory and often develop into chronic ulcers. The healing of skin ulcers requires an inflammatory reaction, wound proliferation, remodeling regulation, and control of stem cells. Studies investigating diabetic cutaneous ulcers have focused on cellular and molecular levels. Diabetes can cause nerve and blood vessel damage, and persistent high blood sugar levels can cause systemic multisite nerve damage based on peripheral neuropathy. The long-term hyperglycemia state enables the polyol glucose metabolism pathway to be activated, increasing the accumulation of toxic substances in the vascular injured nerve tissue cells. Sustained hyperglycemia leads to dysfunction of epithelial cells, leading to a decrease in pro-angiogenic signaling and nitric oxide production. In addition, due to impaired leukocyte function in hyperglycemia, immune function is impaired and the immune response at relevant sites is insufficient, making diabetic foot more difficult to heal. The Wnt/β-catenin pathway is a highly conserved signal transduction pathway involved in a variety of biological processes, such as cell proliferation, apoptosis, and differentiation. It is considered an important pathway involved in the healing of skin wounds. This article summarizes the mechanism of action of the Wnt/β-catenin pathway involved in the inflammatory responses to diabetic ulcers, wound proliferation, wound remodeling, and stem cells. The interactions between the Wnt signal pathway and other metabolic pathways are also discussed

The Beneficial Effects of Bisphosphonate-enoxacin on Cortical Bone Mass and Strength in Ovariectomized Rats

Osteoporosis is a major age-related bone disease characterized by low bone mineral density and a high risk of fractures. Bisphosphonates are considered as effective agents treating osteoporosis. However, long-term use of bisphosphonates is associated with some serious side effects, which limits the widespread clinical use of bisphosphonates. Here, we demonstrate a novel type of bone-targeting anti-resorptive agent, bisphosphonate-enoxacin (BE). In this study, ovariectomized rat model was established and treated with PBS, zoledronate (50 μg/kg) and different dose of BE (5 mg/kg and 10 mg/kg), respectively. The rats subjected to sham-operation and PBS treatment were considered as control group. Then, micro-computed tomography scanning, biomechanical tests, nano-indentation test and Raman analysis were used to compare the effects of zoledronate and BE on cortical bone mass, strength, and composition in ovariectomized rats. We found that both zoledronate and BE were beneficial to cortical bone strength. Three-point bending and nano-indentation tests showed that zoledronate- and BE-treated groups had superior general and local biomechanical properties compared to the ovariectomized groups. Interestingly, it seemed that BE-treated group got a better biomechanical property than the zoledronate-treated group. Also, BE-treated group showed significantly increased proteoglycan content compared with the zoledronate-treated group. We hypothesized that the increased bone strength and biomechanical properties was due to altered bone composition after treatment with BE. BE, a new bone-targeting agent, may be considered a more suitable anti-resorptive agent to treat osteoporosis and other bone diseases associated with decreased bone mass

A 5-50 Gb/s quarter rate transmitter with a 4-tap multiple-MUX based FFE in 65 nm CMOS

This paper presents a 5-50 Gb/s quarter-rate transmitter with a 4-tap feed-forward equalization (FFE) based on multiple-multiplexer (MUX). A bandwidth enhanced 4:1 MUX with the capability of eliminating charge-sharing effect is proposed to increase the maximum operating speed. To produce the quarter-rate parallel data streams with appropriate delays, a compact latch array associated with an interleaved-retiming technique is designed. Implemented in 65 nm CMOS technology, the transmitter occupying an area of 0.6 mm2 achieves a maximum data rate of 50 Gb/s with an energy efficiency of 3.1 pJ/bit

Biomechanical evaluation of a novel individualized zero-profile cage for anterior cervical discectomy and fusion: a finite element analysis

Introduction: Anterior cervical discectomy and fusion (ACDF) is a standard procedure for treating symptomatic cervical degenerative disease. The cage and plate constructs (CPCs) are widely employed in ACDF to maintain spinal stability and to provide immediate support. However, several instrument-related complications such as dysphagia, cage subsidence, and adjacent segment degeneration have been reported in the previous literature. This study aimed to design a novel individualized zero-profile (NIZP) cage and evaluate its potential to enhance the biomechanical performance between the instrument and the cervical spine.Methods: The intact finite element models of C3-C7 were constructed and validated. A NIZP cage was designed based on the anatomical parameters of the subject’s C5/6. The ACDF procedure was simulated and the CPCs and NIZP cage were implanted separately. The range of motion (ROM), intradiscal pressure (IDP), and peak von Mises stresses of annulus fibrosus were compared between the two surgical models after ACDF under four motion conditions. Additionally, the biomechanical performance of the CPCs and NIZP cage were evaluated.Results: Compared with the intact model, the ROM of the surgical segment was significantly decreased for both surgical models under four motion conditions. Additionally, there was an increase in IDP and peak von Mises stress of annulus fibrosus in the adjacent segment. The NIZP cage had a more subtle impact on postoperative IDP and peak von Mises stress of annulus fibrosus in adjacent segments compared to CPCs. Meanwhile, the peak von Mises stresses of the NIZP cage were reduced by 90.0–120.0 MPa, and the average von Mises stresses were reduced by 12.61–17.56 MPa under different motion conditions. Regarding the fixation screws, the peak von Mises stresses in the screws of the NIZP cage increased by 10.0–40.0 MPa and the average von Mises stresses increased by 2.37–10.10 MPa.Conclusion: The NIZP cage could effectively reconstruct spinal stability in ACDF procedure by finite element study. Compared with the CPCs, the NIZP cage had better biomechanical performance, with a lower stress distribution on the cage and a more moderate effect on the adjacent segmental discs. Therefore, the NIZP cage could prevent postoperative dysphagia as well as decrease the risk of subsidence and adjacent disc degeneration following ACDF. In addition, this study could serve as a valuable reference for the development of personalized instruments

Time to full enteral feeding for very low-birth-weight infants varies markedly among hospitals worldwide but may not be associated with incidence of necrotizing enterocolitis:The NEOMUNE-NeoNutriNet Cohort Study

Background: Transition to enteral feeding is difficult for very low-birth-weight (VLBW; ≤1500 g) infants, and optimal nutrition is important for clinical outcomes. Method: Data on feeding practices and short-term clinical outcomes (growth, necrotizing enterocolitis [NEC], mortality) in VLBW infants were collected from 13 neonatal intensive care units (NICUs) in 5 continents (n = 2947). Specifically, 5 NICUs in Guangdong province in China (GD), mainly using formula feeding and slow feeding advancement (n = 1366), were compared with the remaining NICUs (non-GD, n = 1581, Oceania, Europe, United States, Taiwan, Africa) using mainly human milk with faster advancement rates. Results: Across NICUs, large differences were observed for time to reach full enteral feeding (TFF; 8–33 days), weight gain (5.0–14.6 g/kg/day), ∆z-scores (−0.54 to −1.64), incidence of NEC (1%–13%), and mortality (1%–18%). Adjusted for gestational age, GD units had longer TFF (26 vs 11 days), lower weight gain (8.7 vs 10.9 g/kg/day), and more days on antibiotics (17 vs 11 days; all P <.001) than non-GD units, but NEC incidence and mortality were similar. Conclusion: Feeding practices for VLBW infants vary markedly around the world. Use of formula and long TFF in South China was associated with more use of antibiotics and slower weight gain, but apparently not with more NEC or higher mortality. Both infant- and hospital-related factors influence feeding practices for preterm infants. Multicenter, randomized controlled trials are required to identify the optimal feeding strategy during the first weeks of life

Experimental and modeling investigation on separation of methane from coal seam gas (CSG) using hydrate formation

The effects of temperature, pressure, initial promoter concentration and coal seam gas/liquid ratio on the separation of methane from coal seam gas were experimentally investigated. Low temperature, high pressure and high promoter concentration lead to high separation efficiency and high recovery rate of CH 4 , but reduce the CH 4 capture selectivity in hydrate. Experimental simulation of a three-stage separation shows that CH 4 can be concentrated from 34.6 to 81.3 mol% in the dissociated gas, while its content is only 7.2 mol% in the residual gas. An innovative model was established to predict the separation performance. The modeling results reasonably match the experimental data in predicting the effects of different influential factors, with an average relative deviation of 2.83%, the maximum relative deviation 11.2%, and the average relative variance 0.1044. The modeling results of a three-stage separation process include 81.0 mol% of CH 4 in the final dissociated gas and 5.5 mol% of CH 4 in the final residual gas. The recovery rate of CH 4 was 90.1 mol% and the separation factor was 73.0

Concise and Efficient Self-Healing Cross-Linked Polyurethanes via the Blocking/Deblocking Reaction of Oxime Urethanes

The development of self-healing polymers can extend the service life of polymer materials. However, it is still a challenge to prepare a polyurethane with high healing efficiency and maximum retention of the properties of polyurethane itself. In this research, we proposed a new scheme for the industrial production of self-healing polyurethane and successfully synthesized a self-healing polyurethane using diacetyl oxime as the chain extender and triethanolamine as the cross-linking agent. Oxime-blocked isocyanates deblock at a higher temperature and regenerate oxime urethanes at a lower temperature, thereby achieving thermal reversibility and self-healing due to the concise and efficient thermal reversible reaction of oxime urethanes. Fourier transform infrared and differential scanning calorimetry experiments confirmed that the oxime urethanes in the polyurethane deblock efficiently at around 90 degrees C and re-block after the temperature is lowered. The process can be cycled at least three times. Microscopic observation confirmed that the cracks disappeared within 60-90 min at 90 degrees C. The tensile test shows that the synthetic DiO-c-PU has a self-healing efficiency of over 94% at 90 degrees C for 1.5 h, which is more efficient. From the results, it appears that DiO-c-PU has good self-healing properties