Manufacture and performance test result of a 95 kA-class Nb-Ti cable-in-conduit conductor for the low field winding-package of CFETR-TF coil

The engineering design of the CFETR TF prototype coil and conductors has been completed. The wind-package (WP) of the coil is graded into three regions based on the magnetic field distribution for saving cost. High-Jc Nb3Sn strand, ITER-like Nb3Sn strand and Nb-Ti strand are applied for high-field, mid-field and low-field WP respectively. In order to verify the conductor design, full-size short samples have been manufactured for the three types of conductors. The samples are tested in the SULTAN facility at CRPP in Villigen, Switzerland. At present, the test of Nb-Ti conductor for low-field WP is finished, DC and AC tests were performed. In DC test, several current sharing temperature (Tcs) measurements were performed with 500 electromagnetic cycles and one thermal cycle. Additionally, minimum quench energy (MQE) measurement was performed for investigating the stability of the conductor. The test results and analysis are reported in this paper.</p

A Mini-System Integrated with Metal-Oxide-Semiconductor Sensor and Micro-Packed Gas Chromatographic Column

In this work, a mini monitoring system integrated with a microfabricated metal oxide array sensor and a micro packed gas chromatographic (GC) column was developed for monitoring environmental gases. The microfabricated packed GC column with a 1.6 m length was used to separate the environmental gas, and the metal oxide semiconductor (MOS) array sensor, fabricated with nano-sized SnO-SnO2 sensitive materials, was able to effectively detect each component separated by GC column. The results demonstrate that the monitoring system can detect environmental gas with high precision

Impregnating subnanometer metallic nanocatalysts into self-pillared zeolite nanosheets

Impregnation is the most commonly used approach to prepare supported metal catalysts in industry. However, this method suffers from the formation of large metal particles with uneven dispersion, poor thermal stability, and thus unsatisfied catalytic performance. Here, we demonstrate that the self-pillared MFI zeolite (silicalite-1 and ZSM-5) nanosheets with larger surface area and abundant Si–OH groups are ideal supports to immobilize ultrasmall monometallic (e.g., Rh and Ru) and various bimetallic clusters via simple incipient wetness impregnation method. The loaded subnanometric metal clusters are uniformly dispersed within sinusoidal five-membered rings of MFI and remain stable at high temperatures. The Rh/SP-S-1 is highly efficient in ammonia borane (AB) hydrolysis, showing a TOF value of 430 molH2 molRh–1 min–1 at 298 K, which is more than 6-fold improvement over that of nanosized zeolite-supported Rh catalyst and even comparable with that of zeolite-supported Rh single-atom catalyst. Because of the synergistic effect between bimetallic Rh–Ru clusters and zeolite acidity, the H2 generation rate from AB hydrolysis over Rh0.8Ru0.2/SP-ZSM-5-100 reaches up to 1006 molH2 molmetal–1 min–1 at 298 K, and also shows record activities in cascade hydrogenation of various nitroarenes by coupling with the hydrolysis of AB. This work demonstrates that zeolite nanosheets are excellent supports to anchor diverse ultrasmall metallic species via the simple impregnation method, and the obtained nanocatalysts can be applied in various industrially important catalytic reactions.We thank the National Natural Science Foundation of China (Grants 21835002, 21920102005, and 21621001) and the 111 Project (B17020) for financial support. Q.S. acknowledges the Academic Start-up Funds of Soochow University (Q410901120). A.M. acknowledges The Centre for High-resolution Electron Microscopy (CℏEM), supported by SPST of ShanghaiTech University under contract. EM02161943; NFSC-21850410448 and to Spanish Ministry of Science under the Ramon y Cajal program (RYC2018-024561-I). This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners.Peer reviewe

Research on mechanical properties of high-performance cable-in-conduit conductors with different design

The China Fusion Engineering Test Reactor (CFETR) is a new tokamak fusion reactor under preliminary design, where the toroidal field (TF) coil has been designed to create a magnetic field of over 14.3 T. The TF conductors need to operate stably at 14.3 T, requiring the exclusion of conductor performance degradation from thermal and electromagnetic loading as much as possible. The maximum Lorentz force will reach about 1200 kN m$^{−1}$, which is much higher than that of ITER conductors. In previous research, performance degradation was found during electromagnetic cycles and warm-up–cool-down cycles. A correlation was found between a conductor’s degradation and its mechanical properties. According to the analysis, a conductor with a short twist pitch (STP) scheme or a copper wound superconducting strand (CWS) design has large stiffness, which enables significant performance improvement in terms of the electromagnetic and thermal load cycling. The cable stiffness is closely related to the number of inter-strand contact points inside the conductor. Based on this concept, four types of prototype cable-in-conduit conductor samples with STP and CWS design were manufactured. The number of inter-strand contact points was analyzed, and mechanical transverse load testing was performed at 77 K. The results show that the conductors with more contact points per unit length exhibit a higher stiffness. However, the cable designed with high cable stiffness caused strand indentation, which was also investigated. In this paper, the conductor design and experimental results are discussed and compared with ITER TF and central solenoid conductors

Research on mechanical properties of high-performance cable-in-conduit conductors with different design

The China Fusion Engineering Test Reactor (CFETR) is a new tokamak fusion reactor under preliminary design, where the toroidal field (TF) coil has been designed to create a magnetic field of over 14.3 T. The TF conductors need to operate stably at 14.3 T, requiring the exclusion of conductor performance degradation from thermal and electromagnetic loading as much as possible. The maximum Lorentz force will reach about 1200 kN m-1, which is much higher than that of ITER conductors. In previous research, performance degradation was found during electromagnetic cycles and warm-up-cool-down cycles. A correlation was found between a conductor's degradation and its mechanical properties. According to the analysis, a conductor with a short twist pitch (STP) scheme or a copper wound superconducting strand (CWS) design has large stiffness, which enables significant performance improvement in terms of the electromagnetic and thermal load cycling. The cable stiffness is closely related to the number of inter-strand contact points inside the conductor. Based on this concept, four types of prototype cable-in-conduit conductor samples with STP and CWS design were manufactured. The number of inter-strand contact points was analyzed, and mechanical transverse load testing was performed at 77 K. The results show that the conductors with more contact points per unit length exhibit a higher stiffness. However, the cable designed with high cable stiffness caused strand indentation, which was also investigated. In this paper, the conductor design and experimental results are discussed and compared with ITER TF and central solenoid conductors