15,045 research outputs found
Optimization of deep drawing process parameters of 304 stainless steel
The one-step drawing process of double-box flume was simulated by finite element method(FEM). It was found that major defects in the forming process were vertical surface fractures in the box and material accumulation near rounded corners. The optimal forming parameters were obtained by optimizing and improving workpiece, single factor analysis and orthogonal experiment optimization. Guiding grooves with an included angle of 140° and a depth of 1 mm was designed in the blank holder to guide materials from accumulation area to insufficient area, thus reducing material fractures and improving deep drawing. The ultimate depth of one-step drawing without defects was increased to 190 mm by optimizing process parameters and improving structure
Experimental investigation of a solar collector integrated with a pulsating heat pipe and a compound parabolic concentrator
The paper reports an experimental investigation of a newly proposed solar collector that integrates a closed-end pulsating heat pipe (PHP) and a compound parabolic concentrator (CPC). The PHP is used as an absorber due to its simple structure and high heat transfer capacity. The CPC has a concentration ratio of 3.4 and can be readily manufactured by three-dimensional printing. The CPC can significantly increase the incident solar irradiation intensity to the PHP absorber and also reduce the heat loss due to the decrease in the area of the hot surface. A prototype of the solar collector has been built, consisting of a PHP absorber bent by 4 mm diameter copper tube, CPC arrayed by 10 × 2 CPC units with the collection area of 300 × 427.6 mm2, a hot water tank and a glass cover. HFE7100 was utilized as the working fluid at a filling ratio of 40%. The operating characteristics and thermal efficiency of the solar collector were experimentally studied. The steady and periodic temperature fluctuations of the evaporation and condensation sections of the PHP absorber indicate that the absorber works well with a thermal resistance of about 0.26 °C/W. It is also found that, as the main factor to the the thermal performance of the collector, thermal resistance of the PHP absorber decreases with increasing evaporation temperature. The collector apparently shows start-up, operational and shutdown stages at the starting and ending temperatures of 75 °C. When the direct normal irradiance is 800 W/m2, the instantaneous thermal efficiency of the solar collector can reach up to 50%.The work was financially supported by the National Natural Science Foundation of China (51506004), Beijing Natural Science Foundation (3162009), Scientific Research Project of Beijing Educational Committee (KM201410016001) and Research Fund of Beijing University of Civil Engineering and Architecture
Long-Lasting Orientation of Symmetric-top Molecules Excited by Two-Color Femtosecond Pulses
Impulsive orientation of symmetric-top molecules excited by two-color
femtosecond pulses is considered. In addition to the well-known transient
orientation appearing immediately after the pulse and then reemerging
periodically due to quantum revivals, we report the phenomenon of field-free
long-lasting orientation. Long-lasting means that the time averaged orientation
remains non-zero until destroyed by other physical effects, e.g. intermolecular
collisions. The effect is caused by the combined action of the
field-polarizability and field-hyperpolarizability interactions. The dependence
of degree of long-lasting orientation on temperature and pulse's parameters is
considered. The effect can be measured by means of second (or higher-order)
harmonic generation, and may be used to control the deflection of molecules
traveling through inhomogeneous electrostatic fields.Comment: 12 pages, 7 figure
Modeling the stress dependence of magnetic hysteresis based on Stoner-Wohlfarth theory
© 2015 IEEE. This paper presents an improved approach for simulating magnetic hysteresis, which takes into account the effect of applied stress, based on an extended Stoner-Wohlfarth (S-W) model. Meanwhile, the S-W asteroid rotates and shrinks, and the stable direction of magnetization of the particle can be calculated from the new energy minimum conditions. This developed model is applied to analyze the magnetic hysteresis phenomenon of a soft magnetic composite (SMC) material under different compaction process, and the results of simulations are in good quantitative agreement with experimental data
Two-dimensional elemental operator for modeling the vectorial hysteresis of soft magnetic composite material
© 2015 IEEE. This paper presents a two-dimensional elemental operator with biaxial anisotropy based on the physical mechanisms of the cubic textured magnetic materials, and deduces an analytical expression of the direct relationship between magnetic field strength H and magnetization M for a single elemental operator by the partial approximate substitutions. To verify the proposed model, the magnetic hysteresis of a soft magnetic composite material SOMALOYTM 500 under alternating excitations was simulated and compared with the experimental results obtained by a 3D magnetic property tester. The results suggest that the proposed approach can be a useful tool in the modeling of vectorial magnetic hysteresis and the calculation of iron loss in practical engineering electromagnetic field analysis
- …