Effect of Operating Parameters on the Performance Evaluation of Benthic Microbial Fuel Cells Using Sediments from the Bay of Campeche, Mexico

Benthic microbial fuel cells (BMFC) are devices that remove organic matter (OM) and generate energy from sediments rich in organic nutrients. They are composed of electrodes with adequate different distances and floating air cathodes in an aqueous medium with saturated oxygen. In this study we proposed to design, build, analyze and evaluate a set of BMFCs with floating air cathodes to test the optimal distance between the electrodes, using sediment from the Bay of Campeche as a substrate. For the analysis of OM removal, COD tests, volatile solids (VS), E4/E6 study and FTIR analysis were performed. Power generation was evaluated through polarization curves, cyclic voltammetry and electrochemical impedance spectroscopy (EIS). We achieved a current density and power density at 10 cm depth of 929.7 ± 9.5 mA/m2 and 109.6 ± 7.5 mW/m2 respectively, with 54% removal of OM from the sediment, obtaining formation of aliphatic structures. BMFCs are proposed as adequate systems for bioremediation and power generation. The system at 10 cm depth and 100 cm distance between sediment and the floating air cathode had a good performance and therefore the potential for possible scaling

Polarization Potential Has No Effect on Maximum Current Density Produced by Halotolerant Bioanodes

Halotolerant bioanodes are considered an attractive alternative in microbial electrochemical systems, as they can operate under higher conductive electrolytes, in comparison with traditional wastewater and freshwater bioanodes. The dependency between energetic performance and polarization potential has been addressed in several works; however the vast majority discusses its effect when wastewater or freshwater inocula are employed, and fewer reports focus on inocula from highly-saline environments. Moreover, the effect of the polarization potential on current production is not fully understood. To determine if the polarization potential has a significant effect on current production, eight bioanodes were grown by chronoamperometry at positive and negative potentials relative to the reference electrode (+0.34 V/SHE and −0.16 V/SHE), in a three-electrode set-up employing sediments from a hyperhaline coastal lagoon. The maximum current density obtained was the same, despite the differences in the applied potential. Our findings indicate that even if differences in organic matter removal and coulombic efficiency are obtained, the polarization potential had no statistically significant effect on overall current density production