The Effect of Nano-SiO2 Dispersed Methods on Mechanical Properties of Cement Mortar

Nano-SiO2 is added to the cement by using different dispersion methods, through the macroscopic mechanical properties to characterize its dispersion in the cement, it can be used to explore the best experimental process. The results show that the compressive strength of cement samples with different dispersion methods is different. When the physical dispersion method is used, the intensity is not improved, but the ultrasonic dispersion method is the smallest, and the dispersion of nano-SiO2 is -9.11%. When the surfactant is used as dispersant, the dispersion of nano-SiO2 by Naphthalene water reducer is the best, and the compressive strength is increased by 6.68%. By using polymeric dispersing agent, polyethylene glycol has a certain effect on the dispersion of nano-SiO2, but it has some damage to the cement (set-retarder, etc.). Based on the above experiments, we have obtained the best dispersion method, which uses ultrasonic dispersion, and also needs to add naphthalene water reducer

Hydrostatic Pressure and Built-In Electric Field Effects on the Donor Impurity States in Cylindrical Wurtzite GaN/Al x

Within the framework of the effective mass approximation, the ground-state binding energy of a hydrogenic impurity is investigated in cylindrical wurtzite GaN/AlxGa1-xN strained quantum ring (QR) by means of a variational approach, considering the influence of the applied hydrostatic pressure along the QR growth direction and the strong built-in electric field (BEF) due to the piezoelectricity and spontaneous polarization. Numerical results show that the donor binding energy for a central impurity increases inchmeal firstly as the QR radial thickness (ΔR) decreases gradually and then begins to drop quickly. In addition, the donor binding energy is an increasing (a decreasing) function of the inner radius (height). It is also found that the donor binding energy increases almost linearly with the increment of the applied hydrostatic pressure. Moreover, we also found that impurity positions have an important influence on the donor binding energy. The physical reasons have been analyzed in detail

Influence of polypropylene fiber reinforcement on tensile behavior and failure mode of tailings cemented paste backfill

Tailings were used to prepare cemented paste backfill (CPB) reinforced with polypropylene (PP) fiber, and fiber content and fiber length were 0-20 % and 3-12 mm, respectively. The Brazilian indirect tensile strength tests, macrostructural and microstructural (SEM) failure mode analyses and nuclear magnetic resonance (NMR) tests were performed. The results demonstrate that PP fiber with high tensile strength can substantially enhance the tensile strength and ductility of CPB specimens. The fiber-reinforced CPB exhibits superior performance during the pre-peak and post-peak stages and can retain its residual strength after being broken. The fiber-reinforced CPB provided a higher secant Young’s modulus and strain at peak stress than that of the unreinforced CPB. From the failure mode analysis, fiber was used to bridge the CPB microelements and combine these effectively with calcium silicate hydrate gelling. The governing failure mode of fiber is pulled out or pull off, through which fiber absorbs the tensile stress and energy. However, fiber is also believed to have confusion distribution in CPB because fiber cannot reach their full strain capacity, especially at the later curing stage. And the weak structural layers in the CPB can also be formed, and the higher tensile strength is not achieved with the additional fiber content or longer fiber length. The optimal fiber content in this study is recommended to be 0.15 %, and it’s better to choose 6 or 9 mm fiber. Moreover, fiber can reduce the original porosity by 10.72 %, but only has a slight influence on the pore size. The decrease in porosity helps increase the tensile strength of the fiber-reinforced CPB

A Case report: Synovial sarcoma of the mediastinum in an 18-year-old teenager

Synovial sarcomas (SSs) are a rare group of malignant tumors originating from pluripotential mesenchymal cells, which commonly occur as the primary tumor in the soft tissues near the articular surface, tendons, and articular synovium. Herein, we report a rare case of mediastinal SS in an 18-year-old teenager who initially presented with cough as the primary symptom. In this case, plain chest CT and contrast-enhanced CT clearly revealed the lesion presenting as a round-like and uneven density mass in the mediastinum with heterogeneous enhancement, which compressed the trachea and invaded the adjacent vessels. Based on the results of immunohistochemistry and fluorescence in situ hybridization (FISH), combined with the differential diagnosis with other types of tumors in the mediastinum on imaging, we were able to diagnose the tumor as an SS located in the mediastinum. Subsequent resection of the lesion coupled with chemotherapy and immunotherapy led to an improvement in the patient’s symptoms

Association of Short Tandem Repeat Polymorphism in the Promoter of Prostate Cancer Antigen 3 Gene with the Risk of Prostate Cancer

BACKGROUND: PCA3 (prostate cancer antigen 3) gene is one of the most prostate cancer-specific genes at present. Consequently, the prostate-specific expression and the sharp up-regulation of PCA3 mRNA in prostate cancer suggest a unique transcriptional regulation, which possibly can be attributed to promoter polymorphism. In our study, we evaluated whether there is polymorphism in PCA3 promoter region and also assess the association of the polymorphism with prostate cancer. METHODOLOGY/PRINCIPAL FINDINGS: We designed a specific primer set to screen the promoter of PCA3 gene by polymerase chain reaction (PCR)-based cloning and sequencing with the DNA extracted from peripheral blood samples of prostate cancer (PCa) cases (n = 186) and healthy control cases (n = 135). Genotype-specific risks were estimated as odds ratios (ORs) with associated 95% confidence intervals (CIs) by chi-square test. Possible deviation of the genotype frequencies from controls and PCa cases expected under Hardy-Weinberg equilibrium was assessed by the chi-square test. Short tandem repeat polymorphism of TAAA was found in the promoter region of PCA3 gene, five polymorphisms and eight genotypes were identified. The eight genotypes were divided into three groups: ≤10TAAA, 11TAAA, ≥12TAAA. The group 11TAAA and ≥12TAAA were associated with higher relative risk for prostate cancer than group ≤10TAAA (OR = 1.76, 95%CI = 1.07-2.89[for group 11TAAA]; OR = 5.28, 95%CI = 1.76-15.89[for group ≥12TAAA]). CONCLUSIONS/SIGNIFICANCE: The presence of the (TAAA)n short tandem repeat polymorphisms in the PCA3 promoter region may be a risk factor for prostate cancer in the Chinese population

A Novel Type of Boundary Extraction Method and Its Statistical Improvement for Unorganized Point Clouds Based on Concurrent Delaunay Triangular Meshes

Currently, three-dimensional (3D) laser-scanned point clouds have been broadly applied in many important fields, such as non-contact measurements and reverse engineering. However, it is a huge challenge to efficiently and precisely extract the boundary features of unorganized point cloud data with strong randomness and distinct uncertainty. Therefore, a novel type of boundary extraction method will be developed based on concurrent Delaunay triangular meshes (CDTMs), which adds the vertex-angles of all CDTMs around a common data point together as an evaluation index to judge whether this targeted point will appear at boundary regions. Based on the statistical analyses on the CDTM numbers of every data point, another new type of CDTM-based boundary extraction method will be further improved by filtering out most of potential non-edge points in advance. Then these two CDTM-based methods and popular α-shape method will be employed in conducting boundary extractions on several point cloud datasets for comparatively analyzing and discussing their extraction accuracies and time consumptions in detail. Finally, all obtained results can strongly demonstrate that both these two CDTM-based methods present superior accuracies and strong robustness in extracting the boundary features of various unorganized point clouds, but the statistically improved version can greatly reduce time consumption

A Novel Type of Boundary Extraction Method and Its Statistical Improvement for Unorganized Point Clouds Based on Concurrent Delaunay Triangular Meshes

Currently, three-dimensional (3D) laser-scanned point clouds have been broadly applied in many important fields, such as non-contact measurements and reverse engineering. However, it is a huge challenge to efficiently and precisely extract the boundary features of unorganized point cloud data with strong randomness and distinct uncertainty. Therefore, a novel type of boundary extraction method will be developed based on concurrent Delaunay triangular meshes (CDTMs), which adds the vertex-angles of all CDTMs around a common data point together as an evaluation index to judge whether this targeted point will appear at boundary regions. Based on the statistical analyses on the CDTM numbers of every data point, another new type of CDTM-based boundary extraction method will be further improved by filtering out most of potential non-edge points in advance. Then these two CDTM-based methods and popular α-shape method will be employed in conducting boundary extractions on several point cloud datasets for comparatively analyzing and discussing their extraction accuracies and time consumptions in detail. Finally, all obtained results can strongly demonstrate that both these two CDTM-based methods present superior accuracies and strong robustness in extracting the boundary features of various unorganized point clouds, but the statistically improved version can greatly reduce time consumption

The Integrated Effect of Carbon Emissions Trading and Pollution Rights Trading for Power Enterprises—A Case Study of Chongqing

To control growing environmental problems, the pollution rights trading (PRT) center was established in Jiaxing in 2007, and China officially joined the carbon emission reduction market (NCET) in 2011. Since power enterprises are the main participants in the NCET market and PRT market, the integrated effect of the NCET market and PRT market on power enterprise profit and the regional environment is one of the major issues that needs to be taken into consideration. Based on system dynamics (SD) theory, we propose an NCET-PRT simulation model for power enterprises in Chongqing. Through analyzing parameters of carbon trading price, free ratio, and emission trading prices, 12 different simulation scenarios are configured for sensitivity analysis. Based on the simulation results, the following observations can be obtained: (1) NCET and PRT can effectively promote the performance of enterprises’ carbon emissions reduction and regional pollutant emission reduction but will have a minor negative impact on the industrial economy at the same time; (2) The trading mechanism is interactive; if the carbon emissions trading (NCET) mechanism is implemented separately, the emission of pollutants will be reduced significantly. However, the implementation of pollution rights trading (PRT) alone cannot significantly reduce CO2 emissions; (3) At an appropriate level, NCET and PRT can be enhanced to achieve a maximum emissions reduction effect at a minimum economic cost

Feasibility of Recycling Ultrafine Leaching Residue by Backfill: Experimental and CFD Approaches

Large amounts of leaching residue are released into tailings dams from mines, and their acid content can cause environmental pollution. The aim of this study was to research the feasibility and value of a leaching residue backfill recycling method. The combination of property detection, laboratory tests (the neutralization method, strength test and diffusivity test) and numerical simulation methods (3D computational fluid dynamics (CFD) simulations of pipeline transportation properties) were used to assess the performance of the leaching residue backfill. The results show that backfill body with the cement:sand mass ratio of 1:3, the leaching residue:classified tailings ratio of 1:6, and slurry mass concentration of 71 wt % can meet the strength and pipeline self-flowing transportation requirements of mine backfill. The leaching residue is a good backfill aggregate, and its recovery ratio can reach 19.5 wt %. In addition, the recycling of leaching residue effectively alleviates the problem of mine waste emissions and protects the ecological environment surrounding the mining area. This study serves as a guide for the recycling of fine tailings and the environmental governance of the mining area