4 research outputs found
Opposite Superwetting Nickel Meshes for On-Demand and Continuous Oil/Water Separation
Oil/water separation is widely studied
because of the growing discharge
of industrial and domestic oily water, as well as frequent petroleum
spills; however, on-demand and continuous oil/water separation has
seldom been reported. For this purpose, we prepared opposite wetting
nickel meshes by creating FeNiO<sub><i>x</i></sub>(OH)<sub><i>y</i></sub> micro-/nanostructures on the surface and
further modification. The surface morphology, chemical composition,
and the wetting property were investigated by SEM, EDS, XRD, Raman
spectrum, XPS, and contact angle measurement. The as-prepared superhydrophilic/underwater
superoleophobic and superhydrophobic/superoleophilic meshes could
be used for reusable on-demand oil/water separation with high efficiency.
Additionally, continuous oil/water separation was realized by integrating
the opposite meshes. The current work will be beneficial for the design
and development of materials with special wettabilities and the practical
application of oil/water separation
Nature-Inspired Strategy toward Superhydrophobic Fabrics for Versatile Oil/Water Separation
Phytic
acid, which is a naturally occurring component that is widely
found in many plants, can strongly bond toxic mineral elements in
the human body, because of its six phosphate groups. Some of the metal
ions present the property of bonding with phytic acid to form insoluble
coordination complexes aggregations, even at room temperature. Herein,
a superhydrophobic cotton fabric was prepared using a novel and facile
nature-inspired strategy that introduced phytic acid metal complex
aggregations to generate rough hierarchical structures on a fabric
surface, followed by PDMS modification. This superhydrophobic surface
can be constructed not only on cotton fabric, but also on filter paper,
polyethylene terephthalate (PET) fabric, and sponge. Ag<sup>I</sup>, Fe<sup>III</sup>, Ce<sup>III</sup>, Zr<sup>IV</sup>, and Sn<sup>IV</sup> are very commendatory ions in our study. Taking phytic acid–Fe<sup>III</sup>-based superhydrophobic fabric as an example, it showed
excellent resistance to ultraviolet (UV) irradiation, high temperature,
and organic solvent immersion, and it has good resistance to mechanical
wear and abrasion. The superhydrophobic/superoleophilic fabric was
successfully used to separate oil/water mixtures with separation efficiencies
as high as 99.5%. We envision that these superantiwetting fabrics,
modified with phytic acid–metal complexes and PDMS, are environmentally
friendly, low cost, sustainable, and easy to scale up, and thereby
exhibit great potentials in practical applications
Nature-Inspired Strategy toward Superhydrophobic Fabrics for Versatile Oil/Water Separation
Phytic
acid, which is a naturally occurring component that is widely
found in many plants, can strongly bond toxic mineral elements in
the human body, because of its six phosphate groups. Some of the metal
ions present the property of bonding with phytic acid to form insoluble
coordination complexes aggregations, even at room temperature. Herein,
a superhydrophobic cotton fabric was prepared using a novel and facile
nature-inspired strategy that introduced phytic acid metal complex
aggregations to generate rough hierarchical structures on a fabric
surface, followed by PDMS modification. This superhydrophobic surface
can be constructed not only on cotton fabric, but also on filter paper,
polyethylene terephthalate (PET) fabric, and sponge. Ag<sup>I</sup>, Fe<sup>III</sup>, Ce<sup>III</sup>, Zr<sup>IV</sup>, and Sn<sup>IV</sup> are very commendatory ions in our study. Taking phytic acid–Fe<sup>III</sup>-based superhydrophobic fabric as an example, it showed
excellent resistance to ultraviolet (UV) irradiation, high temperature,
and organic solvent immersion, and it has good resistance to mechanical
wear and abrasion. The superhydrophobic/superoleophilic fabric was
successfully used to separate oil/water mixtures with separation efficiencies
as high as 99.5%. We envision that these superantiwetting fabrics,
modified with phytic acid–metal complexes and PDMS, are environmentally
friendly, low cost, sustainable, and easy to scale up, and thereby
exhibit great potentials in practical applications
Inspired by Stenocara Beetles: From Water Collection to High-Efficiency Water-in-Oil Emulsion Separation
Inspired by the water-collecting
mechanism of the Stenocara beetle’s
back structure, we prepared
a superhydrophilic bumps–superhydrophobic/superoleophilic stainless
steel mesh (SBS-SSM) filter <i>via</i> a facile and environmentally
friendly method. Specifically, hydrophilic silica microparticles are
assembled on the as-cleaned stainless steel mesh surface, followed
by further spin-coating with a fluoropolymer/SiO<sub>2</sub> nanoparticle
solution. On the special surface of SBS-SSM, attributed to the steep
surface energy gradient, the superhydrophilic bumps (hydrophilic silica
microparticles) are able to capture emulsified water droplets and
collect water from the emulsion even when their size is smaller than
the pore size of the stainless steel mesh. The oil portion of the
water-in-oil emulsion therefore permeates through pores of the superhydrophobic/superoleophilic
mesh coating freely and gets purified. We demonstrated an oil recovery
purity up to 99.95 wt % for surfactant-stabilized water-in-oil emulsions
on the biomimetic SBS-SSM filter, which is superior to that of the
traditional superhydrophobic/superoleophilic stainless steel mesh
(S-SSM) filter lacking the superhydrophilic bump structure. Together
with a facile and environmentally friendly coating strategy, this
tool shows great application potential for water-in-oil emulsion separation
and oil purification