Harmonically-related diffraction gratings-based interferometer for quadrature phase measurements

We demonstrate the use of shallow diffraction gratings for quadrature phase interferometry. A single shallow diffraction grating-based Michelson interferometer yields only trivial (0° or 180°) phase shift between different output ports. In comparison, a combination of two parallel shallow diffraction gratings can be useful to achieve desired phase shifts (e.g., 90° for quadrature phase interferometry). We show that the phase at different output ports of a grating-pair based interferometer can be adjusted by shearing the two gratings with respect to each other. Two harmonically-related diffraction gratings are used to demonstrate phase shift control at the output ports of a modified Michelson interferometer. Our experimental data is in good agreement with theory

Full field phase imaging using a harmonically matched diffraction grating pair based homodyne quadrature interferometer

In this letter, the authors present a novel quadrature interferometry method based on the use of a harmonically matched shallow grating pair. Unlike a simple beam splitter or single shallow grating, the grating pair can confer a nontrivial interference phase shift (other than 0° or 180°) between the output ports of the interferometer. Using the grating pair as the beam splitter/combiner, the authors implement a homodyne quadrature full field phase interferometer and demonstrate the system's capability to acquire phase and amplitude images

Slanted hole array beam profiler (SHArP)—a high-resolution portable beam profiler based on a linear aperture array

We demonstrate a novel high-resolution portable beam profiler based on a slanted linear array of small apertures, termed a slanted hole array beam profiler (SHArP). The apertures are directly fabricated on a metal-coated CMOS imaging sensor. With a single linear scan, the aperture array can establish a virtual grid of sampling points for beam profiling. With our prototype, we demonstrate beam profiling of Gaussian beams over an area of 66.5 μm×66.5 μm with a resolution of 0.8 μm (compare with the CMOS pixel size of 10 μm). The resolution can be improved into the range of submicrometers by fabricating smaller apertures. The good correspondence between the measured and calculated beam profiles proves the fidelity of our new beam profiling scheme

Harmonically-related gratings-based quadrature phase interferometers

We report a new method for obtaining non-trivial phase difference between the output ports of an interferometer through the use of shallow diffraction gratings. We show that as opposed to a single shallow diffraction grating-based interferometer (which provides only trivial phase shifts, i.e., 0° or 180°), a pair of harmonically-related shallow diffraction gratings can be used to design interferometers with non-trivial phase shifts between different output ports. More importantly, the phase shifts can be adjusted by simply shearing one grating with respect to the other. This approach does not change the path length relationships of the different interference beams within the interferometer, which is an advantage for metrology and low coherence interferometry applications

Cable Replacement Scheme for Low Tower Cable-Stayed Bridges Based on Sensitivity Analysis

Cable replacement is a key technique to solve the problems of cable corrosion and strand breakage. Cable removal causes structural changes. The choice of replacement method affects the safety of the bridge during cable replacement. A sensitivity analysis method was used to evaluate the force and deflection changes of Wohu Bridge. A reasonable method for the number and order of cable replacement was proposed; by comparing different cable removal schemes, it was revealed that the cable force and beam stress changes of the cables closest to the removed cable were the most significant. The results showed that the cable force increment of the surrounding cables was the largest when removing the longest cable. The structural impact change was small when removing the shortest cable. The maximum deflection at the top of the tower decreased with the decrease of the length of the removed cable. It was recommended to replace two cables symmetrically from the center of the tower, and the optimal replacement order was from the shortest cable to the longest cable. Furthermore, this paper also studied the influence of variable load on the cable replacement scheme, and demonstrated that the design scheme of opening part of traffic in this paper was safe and feasible

Quantitative phase imaging using grating-based quadrature phase interferometer

In this paper, we report the use of holographic gratings, which act as the free-space equivalent of the 3x3 fiber-optic coupler, to perform full field phase imaging. By recording two harmonically-related gratings in the same holographic plate, we are able to obtain nontrivial phase shift between different output ports of the gratings-based Mach-Zehnder interferometer. The phase difference can be adjusted by changing the relative phase of the recording beams when recording the hologram. We have built a Mach-Zehnder interferometer using harmonically-related holographic gratings with 600 and 1200 lines/mm spacing. Two CCD cameras at the output ports of the gratings-based Mach-Zehnder interferometer are used to record the full-field quadrature interferograms, which are subsequently processed to reconstruct the phase image. The imaging system has ~12X magnification with ~420μmx315μm field-of-view. To demonstrate the capability of our system, we have successfully performed phase imaging of a pure phase object and a paramecium caudatum

Observing dynamics of transparent samples by harmonically matched grating-based full-field quadrature phase interferometer

Our group has reported the use of harmonically matched diffraction grating for full-field quantitative phase imaging. In this paper, we show the improvement of this technique and the application in observing dynamics of transparent samples. By using the grating as a beam splitter/combiner in an interferometer, we are able to obtain non-trivial phase difference between the output ports of the grating. We have built a Mach-Zehnder interferometer using the holographic grating with 600 and 1200 lines/mm spacing. Two CCD cameras at the output ports of the grating-based Mach-Zehnder interferometer are used to record the full-field quadrature interferograms, which are subsequently processed to reconstruct the phase image. Since the two quadrature interferograms are acquired at the same time, the imaging speed of the system is limited only by the frame rate of the CCD cameras. We have demonstrated the capability of our system by observing dynamics of transparent samples

Zirconium-Catalyzed Atom-Economical Synthesis of 1,1-Diborylalkanes from Terminal and Internal Alkenes

A general and atom-economical synthesis of 1,1-diborylalkanes from alkenes and a borane without the need for an additional H2 acceptor is reported for the first time. The key to our success is the use of an earth-abundant zirconium-based catalyst, which allows a balance of self-contradictory reactivities (dehydrogenative boration and hydroboration) to be achieved. Our method avoids using an excess amount of another alkene as an H2 acceptor, which was required in other reported systems. Furthermore, substrates such as simple long-chain aliphatic alkenes that did not react before also underwent 1,1-diboration in our system. Significantly, the unprecedented 1,1-diboration of internal alkenes enabled the preparation of 1,1-diborylalkanes. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA

Histone Deacetylase 1 (HDAC1) Negatively Regulates Thermogenic Program in Brown Adipocytes via Coordinated Regulation of H3K27 Deacetylation and Methylation

Inhibiting class I histone deacetylases (HDACs) increases energy expenditure, reduces adiposity and improves insulin sensitivity in obese mice. However, the precise mechanism is poorly understood. Here, we demonstrate that HDAC1 is a negative regulator of brown adipocyte thermogenic program. HDAC1 level is lower in mouse brown fat (BAT) than white fat, is suppressed in mouse BAT during cold exposure or β3-adrenergic stimulation, and is down-regulated during brown adipocyte differentiation. Remarkably, overexpressing HDAC1 profoundly blocks, whereas deleting HDAC1 significantly enhances β-adrenergic activation-induced BAT-specific gene expression in brown adipocytes. β-adrenergic activation in brown adipocytes results in a dissociation of HDAC1 from promoters of BAT-specific genes, including uncoupling protein 1 (UCP1) and peroxisome proliferator-activated receptor γ co-activator 1α (PGC1α), leading to increased acetylation of histone H3 lysine 27 (H3K27), an epigenetic mark of gene activation. This is followed by dissociation of the polycomb repressive complexes, including the H3K27 methyltransferase enhancer of zeste homologue (EZH2), suppressor of zeste 12 (SUZ12), and ring finger protein 2 (RNF2) from, and concomitant recruitment of H3K27 demethylase ubiquitously transcribed tetratricopeptide repeat on chromosome X (UTX) to UCP1 and PGC1α promoters, leading to decreased H3K27 trimethylation, a histone transcriptional repression mark. Thus, HDAC1 negatively regulates brown adipocyte thermogenic program, and inhibiting HDAC1 promotes BAT-specific gene expression through a coordinated control of increased acetylation and decreased methylation of H3K27, thereby switching transcriptional repressive state to active state at the promoters of UCP1 and PGC1α. Targeting HDAC1 may be beneficial in prevention and treatment of obesity by enhancing BAT thermogenesis