Microbial Fuels Cell-Based Biosensor for Toxicity Detection: A Review

With the unprecedented deterioration of environmental quality, rapid recognition of toxic compounds is paramount for performing in situ real-time monitoring. Although several analytical techniques based on electrochemistry or biosensors have been developed for the detection of toxic compounds, most of them are time-consuming, inaccurate, or cumbersome for practical applications. More recently, microbial fuel cell (MFC)-based biosensors have drawn increasing interest due to their sustainability and cost-effectiveness, with applications ranging from the monitoring of anaerobic digestion process parameters (VFA) to water quality detection (e.g., COD, BOD). When a MFC runs under correct conditions, the voltage generated is correlated with the amount of a given substrate. Based on this linear relationship, several studies have demonstrated that MFC-based biosensors could detect heavy metals such as copper, chromium, or zinc, as well as organic compounds, including p-nitrophenol (PNP), formaldehyde and levofloxacin. Both bacterial consortia and single strains can be used to develop MFC-based biosensors. Biosensors with single strains show several advantages over systems integrating bacterial consortia, such as selectivity and stability. One of the limitations of such sensors is that the detection range usually exceeds the actual pollution level. Therefore, improving their sensitivity is the most important for widespread application. Nonetheless, MFC-based biosensors represent a promising approach towards single pollutant detection

Evaluation of the Wind Field and Deposition Effect of a Novel Air-Assisted Strawberry Sprayer

Strawberry is a widely cultivated cash crop in China. In order to control pests and diseases on strawberries, there must be sufficient deposits on the abaxial surfaces of the leaves. Air-assisted technology can effectively increase the deposition on the abaxial surfaces of the leaves; however, most air-assisted equipment is not suitable for application due to the pattern of strawberry planting. Therefore, a novel air-assisted strawberry sprayer was developed, the static and dynamic wind fields were measured using a 3D anemometer, and the effectiveness of the application at different spray angles and wind speeds was evaluated. In addition, a comparison of the deposition effect in the strawberry canopy between the air-assisted strawberry sprayer, knapsack sprayer, and spray gun was conducted. The results showed that in the static wind field test, a difference between the center and edge wind fields was obtained, which was correlated with the distance and the outlet wind speed. In the dynamic wind field test, the wind field was found to be rolling backward during the movement, and an inward vortex was obtained. In the field, the data showed that a spray angle of 30° and a wind speed of 16 m·s−1 had the best deposition on the abaxial surface, with a coverage of 36.5% and 38.3% in the upper canopy and 6.2% and 7.9% in the lower canopy, respectively. Moreover, the air-assisted strawberry sprayer was found to have a higher deposition efficiency on abaxial surfaces than the knapsack sprayer and spray gun at a lower spray volume, the values of which in the upper and lower canopies were 42.8% and 29.7%, respectively. In conclusion, the air-assisted strawberry sprayer has the potential for the crop protection of greenhouse strawberries, and more evaluations are needed to improve the sprayer in the future

Promoting Effect of the Core-Shell Structure of MnO2@TiO2 Nanorods on SO2 Resistance in Hg0 Removal Process

Sorbent of αMnO2 nanorods coating TiO2 shell (denoted as αMnO2-NR@TiO2) was prepared to investigate the elemental mercury (Hg0) removal performance in the presence of SO2. Due the core-shell structure, αMnO2-NR@TiO2 has a better SO2 resistance when compared to αMnO2 nanorods (denoted as αMnO2-NR). Kinetic studies have shown that both the sorption rates of αMnO2-NR and αMnO2-NR@TiO2, which can be described by pseudo second-order models and SO2 treatment, did not change the kinetic models for both the two catalysts. In contrast, X-ray photoelectron spectroscopy (XPS) results showed that, after reaction in the presence of SO2, S concentration on αMnO2-NR@TiO2 surface is lower than on αMnO2-NR surface, which demonstrated that TiO2 shell could effectively inhibit the SO2 diffusion onto MnO2 surface. Thermogravimetry-differential thermosgravimetry (TG-DTG) results further pointed that SO2 mainly react with TiO2 forming Ti(SO4)O in αMnO2-NR@TiO2, which will protect Mn from being deactivated by SO2. These results were the reason for the better SO2 resistance of αMnO2-NR@TiO2

Association Between Air Pollutants and Acute Exacerbation of Chronic Obstructive Pulmonary Disease: A Time Stratified Case-Crossover Design With a Distributed Lag Nonlinear Model

Acute exacerbation of chronic obstruction pulmonary disease (AECOPD) as a respiratory disease, is considered to be related to air pollution by more and more studies. However, the evidence on how air pollution affect the incidence of AECOPD and whether there are population differences is still insufficient. Therefore, we select PM10, PM2.5, SO2, NO2, CO, and O3 as representatives combined with daily AECOPD admission data from 1 January 2015 to 26 June 2016 in the rural areas of Qingyang, northwestern China to explore the associations of air pollution with AECOPD. Based on a time-stratified case-crossover design, we constructed a distributed lag nonlinear model to qualify the single and cumulative lagged effects of air pollution on AECOPD. Stratified related risks by sex and age were also reported. The cumulative exposure-response curves were approximately linear for PM2.5, “V”-shaped for PM10, “U”-shaped for NO2 and inverted-“V” for SO2, CO and O3. Exposure to high-PM2.5 (42 μg/m3), high-PM10 (91 μg/m3), high-SO2 (58 μg/m3), low-NO2 (12 μg/m3), and high-CO (1.55 mg/m3) increased the risk of AECOPD. Females aged 15–64 were more susceptible under extreme concentrations of PM2.5, SO2, CO, and low-PM10 than other subgroups. In addition, adults aged 15–64 were more sensitive to extreme concentrations of NO2 compared with the elderly ≥65 years old, while the latter were more sensitive to high-PM10. High-SO2, high-NO2, and extreme concentrations of PM2.5 had the greatest effects on the day of exposure, while low-SO2 and low-CO had lagged effects on AECOPD. Precautionary measures should be taken with a focus on vulnerable subgroups, to control hospitalization for AECOPD associated with air pollutants

Limosilactobacillus fermentum JL-3 isolated from “Jiangshui” ameliorates hyperuricemia by degrading uric acid

Recent studies into the beneficial effects of fermented foods have shown that this class of foods are effective in managing hyperuricemia and gout. In this study, the uric acid (UA) degradation ability of Limosilactobacillus fermentum JL-3 strain, isolated from “Jiangshui” (a fermented Chinese food), was investigated. In vitro results showed that JL-3 strain exhibited high degradation capacity and selectivity toward UA. After oral administration to mice for 15 days, JL-3 colonization was continuously detected in the feces of mice. The UA level in urine of mice fed with JL-3 was similar with the control group mice. And the serum UA level of the former was significantly lower (31.3%) than in the control, further confirmed the UA-lowering effect of JL-3 strain. Limosilactobacillus fermentum JL-3 strain also restored some of the inflammatory markers and oxidative stress indicators (IL-1β, MDA, CRE, blood urea nitrogen) related to hyperuricemia, while the gut microbial diversity results showed that JL-3 could regulate gut microbiota dysbiosis caused by hyperuricemia. Therefore, the probiotic Limosilactobacillus fermentum JL-3 strain is effective in lowering UA levels in mice and could be used as a therapeutic adjunct agent in treating hyperuricemia

Gut microbiome of mealworms (Tenebrio molitor Larvae) show similar responses to polystyrene and corn straw diets

Abstract Background Some insects can degrade both natural and synthetic plastic polymers, their host and gut microbes play crucial roles in this process. However, there is still a scientific gap in understanding how the insect adapted to the polystyrene (PS) diet from natural feed. In this study, we analyzed diet consumption, gut microbiota responses, and metabolic pathways of Tenebrio molitor larvae exposed to PS and corn straw (CS). Results T. molitor larvae were incubated under controlled conditions (25 ± 1 °C, 75 ± 5% humidity) for 30 days by using PS foam with weight-, number-, and size-average molecular weight (Mw, Mn, and Mz) of 120.0, 73.2, and 150.7 kDa as a diet, respectively. The larvae exhibited lower PS consumption (32.5%) than CS (52.0%), and these diets had no adverse effects on their survival. The gut microbiota structures, metabolic pathways, and enzymatic profiles of PS- and CS-fed larvae showed similar responses. The gut microbiota of larvae analysis indicated Serratia sp., Staphylococcus sp., and Rhodococcus sp. were associated with both PS and CS diets. Metatranscriptomic analysis revealed that xenobiotics, aromatic compounds, and fatty acid degradation pathways were enriched in PS- and CS-fed groups; laccase-like multicopper oxidases, cytochrome P450, monooxygenase, superoxidase, and dehydrogenase were involved in lignin and PS degradation. Furthermore, the upregulated gene lac640 in both PS- and CS-fed groups was overexpressed in E. coli and exhibited PS and lignin degradation ability. Conclusions The high similarity of gut microbiomes adapted to biodegradation of PS and CS indicated the plastics-degrading ability of the T. molitor larvae originated through an ancient mechanism that degrades the natural lignocellulose. Video Abstract Graphical Abstrac